Line regulation is the ability of a
power supply
A power supply is an electrical device that supplies electric power to an electrical load. The main purpose of a power supply is to convert electric current from a source to the correct voltage, current, and frequency to power the load. As a r ...
to maintain a constant output
voltage
Voltage, also known as electric pressure, electric tension, or (electric) potential difference, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to m ...
despite changes to the input voltage, with the output
current
Currents, Current or The Current may refer to:
Science and technology
* Current (fluid), the flow of a liquid or a gas
** Air current, a flow of air
** Ocean current, a current in the ocean
*** Rip current, a kind of water current
** Current (stre ...
drawn from the power supply remaining constant.
:
where ΔVi is the change in input voltage while ΔVo is the corresponding change in output voltage.
It is desirable for a power supply to maintain a stable output regardless of changes in the input voltage. The line regulation is important when the input voltage source is unstable or unregulated and this would result in significant variations in the output voltage. The line regulation for an unregulated power supply is usually very high for a majority of operations, but this can be improved by using a voltage regulator. A low line regulation is always preferred. In practice, a well regulated power supply should have a line regulation of at most 0.1%.
In the regulator device datasheets the line regulation is expressed as percent change in output with respect to change in input per volt of the output. Mathematically it is expressed as:
:
The unit here is %/V. For example, In the ABLIC Inc. S1206-series regulator device the typical line regulation is expressed as 0.05%/V which means that the change in the output with respect to change in the input of the regulator device is 0.05%, when the output of the device is set at 1V. Moreover, the line regulation of the device expressed in the datasheet is temperature dependent. Usually the datasheets mention line regulation at 25 °C.
[https://www.ablic.com/en/doc/datasheet/voltage_regulator/S1206_E.pdf ]
See also
*
Load regulation
*
Linear regulator
In electronics, a linear regulator is a voltage regulator used to maintain a steady voltage. The resistance of the regulator varies in accordance with both the input voltage and the load, resulting in a constant voltage output. The regulating circ ...
Notes
Electrical power control
{{electric-power-stub