__NOTOC__
Length overall (LOA, o/a, o.a. or oa) is the maximum length of a vessel's
hull measured parallel to the waterline. This length is important while docking the ship. It is the most commonly used way of expressing the size of a ship, and is also used for calculating the cost of a
marina
A marina (from Spanish , Portuguese and Italian : ''marina'', "coast" or "shore") is a dock or basin with moorings and supplies for yachts and small boats.
A marina differs from a port in that a marina does not handle large passenger ships o ...
berth (for example, £2.50 per metre LOA).
LOA is usually measured on the hull alone. For
sailing ship
A sailing ship is a sea-going vessel that uses sails mounted on masts to harness the power of wind and propel the vessel. There is a variety of sail plans that propel sailing ships, employing square-rigged or fore-and-aft sails. Some ships c ...
s, this may ''exclude'' the
bowsprit
The bowsprit of a sailing vessel is a spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestays. The word ''bowsprit'' is thought to originate from the Middle L ...
and other fittings added to the hull. This is how some racing boats and
tall ships
A tall ship is a large, traditionally- rigged sailing vessel. Popular modern tall ship rigs include topsail schooners, brigantines, brigs and barques. "Tall ship" can also be defined more specifically by an organization, such as for a race or fe ...
use the term LOA. However, other sources may include bowsprits in LOA. Confusingly, LOA has different meanings. "Sparred length", "Total length including bowsprit", "Mooring length" and "LOA including bowsprit" are other expressions that might indicate the full length of a sailing ship.
LOD
Often used to distinguish between the length of a vessel including projections (e.g. bow sprits, etc.) from the length of the hull itself, the Length on Deck or LOD is often reported. This is especially useful for smaller sailing vessels, as their LOA can be significantly different from their LOD.
LOH
In
ISO
ISO is the most common abbreviation for the International Organization for Standardization.
ISO or Iso may also refer to: Business and finance
* Iso (supermarket), a chain of Danish supermarkets incorporated into the SuperBest chain in 2007
* Iso ...
8666 for small boats, there is a definition of LOH, or length of hull,.
This may be shorter than a vessel's LOA, because it excludes other parts attached to the hull, such as
bowsprit
The bowsprit of a sailing vessel is a spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestays. The word ''bowsprit'' is thought to originate from the Middle L ...
s.
LWL
Another measure of length is LWL (
loaded waterline length) which is more useful in assessing a vessel's performance. In some cases (particularly old
yacht
A yacht is a sailing or power vessel used for pleasure, cruising, or racing. There is no standard definition, though the term generally applies to vessels with a cabin intended for overnight use. To be termed a , as opposed to a , such a pleasu ...
s or vessels with
bowsprit
The bowsprit of a sailing vessel is a spar extending forward from the vessel's prow. The bowsprit is typically held down by a bobstay that counteracts the forces from the forestays. The word ''bowsprit'' is thought to originate from the Middle L ...
s) LWL can be considerably shorter than LOA.
See also
*
The National Register of Historic Vessels
*
Length between perpendiculars
Length between perpendiculars (often abbreviated as p/p, p.p., pp, LPP, LBP or Length BPP) is the length of a ship along the summer load line from the forward surface of the stem, or main bow perpendicular member, to the after surface of the ster ...
References
Citations
Sources
*
*
{{Ship measurements
Ship measurements