A honda knot is the

loop knot This page explains commonly used terms related to knots. B Bend A bend is a knot used to join two lengths of rope. Bight A bight has two meanings in knotting. It can mean either any central part of a rope (between the standing end an ...

commonly used in a

lasso A lasso ( or ), also called lariat, riata, or reata (all from Castilian, la reata 're-tied rope'), is a loop of rope designed as a restraint to be thrown around a target and tightened when pulled. It is a well-known tool of the Spanish an ...

.John 'Lofty' Wiseman SAS ''Survival Handbook, Revised Edition''; William Morrow Paperbacks (2009) Its round shape, especially when tied in stiff rope, helps it slide freely along the rope it is tied around. To tie, first place an

overhand knot The overhand knot is one of the most fundamental knots, and it forms the basis of many others, including the simple noose, overhand loop, angler's loop, reef knot, fisherman's knot, Half hitch, and water knot. The overhand knot is a stopper, ...

in the end of the rope. Then tie a second overhand knot, pass the running end of the rope through it, and tighten. A lariat loop is similarly constructed but will not slip from the running end. To tie a lariat loop: first tie an overhand knot, then pinch it so that the running end slides freely back and forth. Pass the rope end through just that "free-sliding" loop, and tighten. The photograph at right displays a lariat loop, with an additional overhand knot acting as a stopper knot because the lariat loop can slip by way of the rope's end when tension is not applied to the running end. It can be quickly adjusted, but does not function exactly the same as a lasso knot, which makes it perhaps safer.

References

{{Knot-stub

See also

References