Numbering
Constituent Companies
The constituent companies of the LNER operated no specific numbering system. Locomotives were numbered in a range starting from 1, with new locomotives being given numbers according to one of three different ways: * New numbers at the end of the existing series; * 'Significant numbers' (e.g. the first of the GER's new passenger locomotive class built from 1900 was numbered '1900', leaving many preceding numbers unused); or * Filling in blanks left by the withdrawal of older locomotives, or their transfer to the 'duplicate list' (see below). In the latter case, on the GER at least, some attempt was made to keep locomotives of the same class numbered in sequence. The GCR and GNoSR operated a strict policy of not permitting any gaps in the number series, nominally for accounting purposes, but this was not followed on other lines. In 1922, the first step towards the 'Grouping' was taken, when the HBR was absorbed by the NER. At that time 3000 was added to the numbers of surviving HBR locomotives which left them well clear of the highest NER numbers then allocated (about 2350). In almost all cases, the constituent companies used only steam locomotives. The NER had 13 electric lomotives, numbered 1-13, but this was in fact in the company's main locomotive list as the lowest-numbered steam locomotive was numbered 14. The NBR owned a petrol shunter, and this was numbered '1' in its own series.Duplicate Lists
'Duplicate lists' were operated by most of the constituent companies in which older locomotives, whose capital costs had been written off but which were not yet ready for withdrawal, could be renumbered, releasing space in the main number range for new locomotives. A variety of different approaches to creating a duplicate list were employed: * GCR: 'B' suffix added * GER: '0' prefix added * GNR: 'A' suffix added * GNoSR: 'A' suffix added * NBR: 1000 added to original number * NER: Use of duplicate list abandoned before GroupingPost-Grouping Numbering
When the LNER was created in 1923, it immediately set about finding a solution to the problem that many of its inherited locomotives carried the same numbers. The first solution, applied from September 1923 was to add a letter suffix to numbers that indicated the original owning company. The first column of the table below shows the letters applied in bold followed by an explanation of the letter in lighter type. This solution was quickly abandoned as it meant that ex-NBR locomotives were carrying numbers that duplicated ex-GCR locomotives carried in their duplicate list. Indeed, this system would not have coped well with any of the locomotives in the constituent company's duplicate lists. Therefore, a new system was derived and applied from February 1924. This involved adding a multiple of thousands to each locomotive number, except: * Ex-NER locomotives which retained their original number; * Ex-HBR and ex-GCR duplicate list locomotives which were completely renumbered. Other duplicate list locomotives were renumbered in the same manner as those in the capital list; i.e. with the prescribed multiple of thousands added, but retaining their prefix or suffix as appropriate. Departmental (non-revenue earning) locomotives continued to be numbered in their own, locally-applied, series. The table below sets out the number ranges used for this system: Note: At first, it was planned to renumber the ex-NBR duplicate list locomotives into blank numbers in the main ex-NBR series. This would have left the highest number allocated as 10050, but after only a handful of locomotives had been so treated, the scheme was abandoned and all duplicate list locomotives were renumbered with 9000 added to their original numbers.Minor Companies
The LNER also absorbed locomotives from a number of smaller railway companies. Their locomotive stock were renumbered as follows: * Ex-CV&HR and MSLR: Being located in the ex-GER area, these locomotives took numbers 8312-8317, which were blank numbers in the GER series. * Ex-E&WYUR: Being located in the ex-GNR area, these locomotives took numbers 3112-3115, which were blank numbers in the GNR series * Ex-M&GNJR: These locomotives had a '0' added as a prefix to their numbers. * Ex-Metropolitan Railway: Being located in the ex-GCR operating area, these locomotives took numbers 6154-6163 and 6415-6422 in the GCR series.New Locomotives
Immediately after Grouping, new engines were numbered in the series used by their constituent company that had ordered them; including the onward transfer of older locomotives to the appropriate duplicate list. Subsequently the new numbering systems of 1923 and 1924 were used in the same way. Thereafter, new locomotives built to LNER designs were mostly numbered in blocks of unused numbers, keeping engines of the same class together. In general, the lowest available block of numbers were used (i.e. starting with the 2xxx numbers after the ex-HBR stock and moving upwards), but there were some exceptions: * Some engines built for work in a specific area took numbers in the range used for engines of the appropriate constituent company. * Some engines were given 'significant numbers' for publicity purposes, e.g. the experimental water tube boiler locomotive was allocated 10000, and the ' P2' class started at 2001. There is evidence that there were cases where new engines were initially allocated numbers in one series according to one of the principles set out above, but these were changed before the engines were released into service in line with an alternative principle. For example, 'P2' class 2001 was originally allocated '2981' until it was decided to give it a 'significant number' instead.1942 Renumbering
In October 1942, a limited renumbering of locomotives was undertaken to clear numbers in the 8300-8900 series for reuse by new locomotives. The following locomotives were affected: However, this scheme was abandoned in early 1943, after only 38 locomotives had been renumbered. The reason was that new plans had been drawn up to carry out a wholesale renumbering of engines, as set out below. The engines that had been renumbered mostly continued to carry their 1942 numbers until the 1946 renumbering was implemented, though two reverted to their 1923 numbers to make way for new locomotive construction.1944 Interim Renumbering
In the interim period between the new numbering system being devised (See below) and it being applied to engines from 1946, a number of temporary renumberings were undertaken to keep things in order. These included: * 3157-3167 (10 survivors only) renumbered 3180-3189 to make way for new freight engines. * 4075 renumbered to the 'significant number' of 2000 following its refurbishment for dedicated use hauling officers' saloons (resulting in old 2000 becoming 2050). This engine was briefly numbered 1 after refurbishment, during which time old 1 became 4075 before reverting to 1. * 8000-8011 renumbered 7978-7989 to make way for new diesel shunters.1946 Renumbering
The downside of the numbering system used by the LNER - and which had not been tackled by the 1942 renumbering - was that locomotives were carrying scattered numbers without reference to class, let alone type of locomotive. In 1943, a scheme was drawn up that would see a complete renumbering of the LNER stock, so that locomotives of the same class would be numbered together and placed in a series with classes of the same type. Only three locomotives would retain their previous numbers: one ( Class W1 no. 10000) by design, the other two ( Class J3 nos. 4125/6) by coincidence. Due to the pressures ofApplication by British Railways
New engines built by British Railways to ex-LNER designs after Nationalisation in 1948 continued to use this numbering system, albeit with 60000 added to the numbers to avoid number conflicts with other absorbed engines (see BR locomotive and multiple unit numbering and classification). There were some minor amendments made by BR, however: * Former LNER diesel and petrol shunters were numbered in the 15xxx series (though the petrol shunters initially carried their appropriate 68xxx series numbers until 1949), while the electric locomotives were numbered in the 26xxx series, leaving the 66xxx series unused. * LNER 10000 became 60700 as the 70xxx series was designated for standard BR steam designs * Ex-Classification
Constituent Companies
Great Central Railway
From 1859, the GCR identified different classes using an alphanumeric system. The first list of classes was a simple list of numbers from 1 onward. Number 18 was the highest allocated. Thence, newly built classes received class numbers with a letter suffix rather than using more numbers. By 1923, the '9' series (the largest) had reached ' 9Q'. Of themselves the letters and numbers had no meaning; they appear to have been allocated randomly. Where new classes were built, or existing classes rebuilt, these were often indicated by adding a more meaningful suffix to the existing alphanumeric class were used. Examples included: * ALT: Altered * B: Bogie version * CONV: Converted * I: Improved version * M: Motor train equipment fitted * T: Tank engine version Locomotives inherited from theGreat Eastern Railway
The principal GER works at Stratford used an order number series that ran from A to Z, then A1 to Z1, A2 to Z2 and so on. This system was used for a myriad of items, including locomotives, but it was these numbers that were used to refer to locomotive classes. Self-evidently this meant there was no continuity in the GER locomotive classification system. The highest-numbered locomotive class was ' H88'. Where more than one order number had been used for a given class, the first order number allocated was used to refer to the whole class. Where locomotives were purchased from outside manufacturers, they were referred to by the lowest number applied to a class member.Great Northern Railway
From 1900, the GNR adopted a system of classification based on a locomotive's wheel arrangemenent (using theGreat North of Scotland Railway
In 1879, every class then in service was allocated a letter between 'A' and 'M' (except 'I'), the oldest types first. From then on, new classes either reused letters that had become free due to withdrawal of older engines, or were allocated a letter at the end of the series. Class 'U' was not used and the highest letter allocated was 'Y'.Hull and Barnsley Railway
Classes were allocated a letter consecutively from 'A', with similar classes being allocated a numeric suffix, or an 'S' suffix to indicate Superheated. The last class letter allocated was 'L'. When the HBR was absorbed by the NER from April 1922, the suffix '(HB)' was added to all ex-HBR classes to differentiate them from NER classes.North British Railway
In 1913, every locomotive then in service was allocated a letter indicating its power. Letters 'A' to 'G' were used for goods engines and shunters and 'H' to 'R' for passenger engines, most powerful types first. Letters 'O' and 'Q' were not used. This system did mean that each letter covered a variety of different classes of locomotive.North Eastern Railway
Prior to 1886, classes were referred to by the number applied to the first built locomotive within that class. New classes built after 1886 were allocated a letter to describe them, commencing at A. Where new classes were a modification of an earlier class allocated a letter, then they were allocated that letter with a numeric suffix starting at 1. The series reached Z in 1911. The next new class was allocated ' D', which had become vacant following rebuilding of the original class to take that letter. There were some exceptions to this system: * Class BTP: A series of Bogie Tank Passenger locomotives built in 1874. * Class 3CC and 4CC: A series of 3- and 4-Cylinder Compound locomotives. * ClassMinor Companies
The three minor companies absorbed by the LNER in 1923 and 1924 were too small to need to classify their locomotive stock. However, both the M&GNJR and Metropolitan Railway had owned a much larger stock of locomotives. Both railways allocated each class a letter consecutively from 'A'. The highest letter issued by the M&GNJR was 'D', and by the Metropolitan was 'K'.LNER System
Steam Locomotives
When the LNER was created in 1923, a new classification scheme was drawn up that could accommodate all the inherited steam locomotives and future new classes, and provide useful information about the features of a given class. The answer, approved in September 1923, was a variation of the GNR system, using a letter to indicate each type's wheel arrangement (based on theModern Traction
Diesel and electric locomotives were given three-part classifications, commencing with either 'DE' for Diesel (electric transmission), 'DM' for Diesel (mechanical transmission) or 'E' for Electric, then 'B' for Banking, 'E' for Express, 'M' for Mixed Traffic or 'S' for Shunter, and finally a number issued to different types consecutively from 1. Note: The LNER's petrol shunters were initially unclassified. When they were allocated a class number in the 1940s, it was 'Y11' in the steam locomotive class series. Similarly, the diesel electric shunters were initially allocated 'J45', being reclassified 'DES1' from September 1945.References
{{British railway rolling stock numbering and classification London and North Eastern Railway Locomotive classification systems