A leading edge inflatable kite (LEI) is a single skin

kite A kite is a tethered heavier-than-air or lighter-than-air craft with wing surfaces that react against the air to create lift and drag forces. A kite consists of wings, tethers and anchors. Kites often have a bridle and tail to guide the fac ...

with inflatable bladders providing structure. It is useful as a

power Power most often refers to: * Power (physics), meaning "rate of doing work" ** Engine power, the power put out by an engine ** Electric power * Power (social and political), the ability to influence people or events ** Abusive power Power may a ...

or traction kite. These kites are flown using 2, 4 or 5 control lines and a bar. (See also:

kite control systems Kite types, kite mooring, and kite applications result in a wide variety of kite control systems. Contemporary manufacturers, kite athletes, kite pilots, scientists, and engineers are expanding the possibilities. Single-line kite control system ...

) A LEI is a great kite for water use because the inflated bladders cause it to float on the water surface. A LEI can sit on the water for an indefinite time and still be relaunched because, unlike a foil kite, there are no chambers that can fill with water. Generally used for

kitesurfing Kiteboarding or kitesurfing is a sport that involves using wind power with a large power kite to pull a rider across a water, land, or snow surface. It combines aspects of paragliding, surfing, windsurfing, skateboarding, snowboarding, and wak ...

and kiteboarding, leading edge inflatable kites come in many different sizes, most commonly from 5 to 18 square metres. Based on their design Leading Edge Inflatable kites can be broken down into four categories: C-kites, hybrid kites, delta kites, and

bow kite Bow kites are leading edge inflatable kites that incorporate a bridle on the leading edge. They are used for the sport of kiteboarding. They can be identified by a flat, swept-back profile and concave trailing edge allowing the kite greater depo ...

C-kites

C-kites are the oldest style of LEI used for traction kiting. They typically come with four lines, and some have the option of an additional 5th line for safety and easy relaunching. The main difference between C-kites and other LEI styles is that they do not have any lines that support the leading edge of the kite (called bridles). The lines on a C-kite attach to the four corners of the kite. Hybrid kites, together with

s and later delta kites are all subtypes of a SLE-kite (Supported Leading Edge), defined by having a bridle which supports the leading edge. C-kites are the preferred kite of wake-style kiteboarders.

SLE sub-types

Bow kites

All of the Bow kite's advantages are because of its concave trailing edge. This design feature changes the shape of the kite's trailing edge as it flies, requiring that the leading edge flatten to match, resulting in a much flatter looking kite. The bridles on the kite restrict the leading edge and hold it in line with the rest of the kite. In addition, the concave trailing edge enables the kite to be sheeted out further than a traditional C- kite, which is why a Bow kite can be nearly 100% depowered. The inflatable and

designs were invented by Dominique and Bruno Legaignoux.

Hybrid kites

Hybrid kites are a cross between C-kites and

s. Like bow kites, they incorporate bridles to support their leading edge. These bridles support the kite and enable designers to experiment with different arc profiles - some Hybrids can have a very flat arc, while some can look similar to a C-kite. Individual characteristics of the Hybrid kites vary depending on how similar they represent one of the other two kite styles. The defining difference between a Hybrid and Bow kite is the shape of the trailing edge. The trailing edge on a Hybrid kite is convex, whereas that of a Bow is concave.

Delta kites

Delta kites are a refinement of the hybrid design. Their shape (when flattened out) is more triangular, which places more of the kite's canopy in the middle. This increases the amount of "projected area" that is exposed to the wind, resulting in more power. These kites still use a bridle (though often extremely simplified), and so could still be called SLE kites. (They are often called C-shaped, but they are not C-kites as they are traditionally known.) Delta C-kites are a new breed of hybrid which combines the high-performance of a C-kite with the depowerable fast-turning triangular Delta kites.

References

{{DEFAULTSORT:Leading Edge Inflatable Kite Kites Kitesurfing Inflatable manufactured goods