KOMDIV-32
   HOME

TheInfoList



OR:

The KOMDIV-32 (russian: КОМДИВ-32) is a family of 32-bit
microprocessor A microprocessor is a computer processor where the data processing logic and control is included on a single integrated circuit, or a small number of integrated circuits. The microprocessor contains the arithmetic, logic, and control circu ...
s developed and manufactured by the
Scientific Research Institute of System Development Scientific Research Institute of System Analysis ( abbrev. SRISA/NIISI RAS, russian: НИИСИ РАН, russian: Научно-исследовательский институт системных исследований Российской Ак ...
(NIISI) of the
Russian Academy of Sciences The Russian Academy of Sciences (RAS; russian: Росси́йская акаде́мия нау́к (РАН) ''Rossíyskaya akadémiya naúk'') consists of the national academy of Russia; a network of scientific research institutes from across t ...
. The manufacturing plant of NIISI is located in
Dubna Dubna ( rus, Дубна́, p=dʊbˈna) is a town in Moscow Oblast, Russia. It has a status of ''naukograd'' (i.e. town of science), being home to the Joint Institute for Nuclear Research, an international nuclear physics research center and one o ...
on the grounds of the
Kurchatov Institute The Kurchatov Institute (russian: Национальный исследовательский центр «Курчатовский Институт», 'National Research Centre "Kurchatov Institute) is Russia's leading research and developmen ...
. The KOMDIV-32 processors are intended primarily for spacecraft applications and many of them are
radiation hardened Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation (particle radiation and high-energy electromagnetic radiation), especially for environm ...
(rad-hard). These microprocessors are compatible with MIPS R3000 and have an integrated MIPS R3010 compatible
floating-point unit In computing, floating-point arithmetic (FP) is arithmetic that represents real numbers approximately, using an integer with a fixed precision, called the significand, scaled by an integer exponent of a fixed base. For example, 12.345 can b ...
.


Overview


Details


1V812

*0.5 µm
CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...
process, 3-layer metal * 108-pin ceramic
Quad Flat Package A quad flat package (QFP) is a surface-mounted integrated circuit package with "gull wing" leads extending from each of the four sides. Socketing such packages is rare and through-hole mounting is not possible. Versions ranging from 32 to 304 ...
(QFP) *1.5 million transistors, 8KB L1 instruction cache, 8KB L1 data cache, compatible with IDT 79R3081E


1890VM1T

*0.5 µm
CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...
process


1890VM2T

*0.35 µm CMOS process


1990VM2T

*0.35 µm silicon on insulator (SOI)
CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...
process * 108-pin ceramic
Quad Flat Package A quad flat package (QFP) is a surface-mounted integrated circuit package with "gull wing" leads extending from each of the four sides. Socketing such packages is rare and through-hole mounting is not possible. Versions ranging from 32 to 304 ...
(QFP) * working temperature from -60 to 125 °C


5890VM1Т

*0.5 µm silicon on insulator (SOI)
CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...
process * 108-pin ceramic
Quad Flat Package A quad flat package (QFP) is a surface-mounted integrated circuit package with "gull wing" leads extending from each of the four sides. Socketing such packages is rare and through-hole mounting is not possible. Versions ranging from 32 to 304 ...
(QFP) *cache (8KB each for data and instructions) * working temperature from -60 to 125 °C


5890VE1Т

*0.5 µm SOI CMOS process * 240-pin ceramic QFP * radiation tolerance to not less than 200 kRad, working temperature from -60 to 125 °C * System-on-a-chip (SoC) including
PCI PCI may refer to: Business and economics * Payment card industry, businesses associated with debit, credit, and other payment cards ** Payment Card Industry Data Security Standard, a set of security requirements for credit card processors * Pro ...
master / slave, 16
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs ) board which may be used as an input or output, or both, and is controllable by software. GPIOs have no ...
, 3
UART A universal asynchronous receiver-transmitter (UART ) is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significan ...
, 3 32-bit
timers A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
*cache (8KB each for data and instructions) *second-sourced by MVC Nizhny Novgorod under the name 1904VE1T (russian: 1904ВЕ1Т) with a clock rate of 40 MHz


1900VM2T

*development name Rezerv-32 *0.35 µm SOI CMOS process * 108-pin ceramic QFP *radiation tolerance to not less than 200 kRad, working temperature from -60 to 125 °C *
triple modular redundancy Triple is used in several contexts to mean "threefold" or a " treble": Sports * Triple (baseball), a three-base hit * A basketball three-point field goal * A figure skating jump with three rotations * In bowling terms, three strikes in a row * I ...
on block level with self-healing * both registers and cache (4KB each for data and instructions) are implemented as dual interlocked storage cells (DICE)


1907VM014

*0.25 µm SOI CMOS process; manufacturing to be moved to Mikron *256-pin ceramic QFP *production planned for 2016 (previously this device was planned to go into production in 2014 under the name 1907VE1T or 1907VM1T) *radiation tolerance to not less than 200 kRad *SoC including
SpaceWire SpaceWire is a spacecraft communication network based in part on the IEEE 1355 standard of communications. It is coordinated by the European Space Agency (ESA) in collaboration with international space agencies including NASA, JAXA, and RKA. ...
,
GOST GOST (russian: ГОСТ) refers to a set of international technical standards maintained by the ''Euro-Asian Council for Standardization, Metrology and Certification (EASC)'', a regional standards organization operating under the auspices of th ...
R 52070-2003 (Russian version of
MIL-STD-1553 MIL-STD-1553 is a military standard published by the United States Department of Defense that defines the mechanical, electrical, and functional characteristics of a serial data bus. It was originally designed as an avionic data bus for use with ...
), SPI, 32
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs ) board which may be used as an input or output, or both, and is controllable by software. GPIOs have no ...
, 2
UART A universal asynchronous receiver-transmitter (UART ) is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significan ...
, 3
timers A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
,
JTAG JTAG (named after the Joint Test Action Group which codified it) is an Technical standard, industry standard for verifying designs and testing printed circuit boards after manufacture. JTAG implements standards for on-chip instrumentation in ele ...
*cache (8KB each for data and instructions)


1907VM038

*development name Skhema-10 *0.25 µm SOI CMOS process; manufacturing to be moved to Mikron *675-pin ceramic BGA *SoC including
SpaceWire SpaceWire is a spacecraft communication network based in part on the IEEE 1355 standard of communications. It is coordinated by the European Space Agency (ESA) in collaboration with international space agencies including NASA, JAXA, and RKA. ...
, GOST R 52070-2003 (
MIL-STD-1553 MIL-STD-1553 is a military standard published by the United States Department of Defense that defines the mechanical, electrical, and functional characteristics of a serial data bus. It was originally designed as an avionic data bus for use with ...
),
RapidIO The RapidIO architecture is a high-performance packet-switched electrical connection technology. RapidIO supports messaging, read/write and cache coherency semantics. Based on industry-standard electrical specifications such as those for Ethern ...
, SPI,
I²C I2C (Inter-Integrated Circuit, ), alternatively known as I2C or IIC, is a synchronous, multi-controller/multi-target (master/slave), packet switched, single-ended, serial communication bus invented in 1982 by Philips Semiconductors. It is wide ...
, 16
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs ) board which may be used as an input or output, or both, and is controllable by software. GPIOs have no ...
, 2
UART A universal asynchronous receiver-transmitter (UART ) is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significan ...
, 3 32-bit
timers A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
,
JTAG JTAG (named after the Joint Test Action Group which codified it) is an Technical standard, industry standard for verifying designs and testing printed circuit boards after manufacture. JTAG implements standards for on-chip instrumentation in ele ...
, DSP (same command set as DSP in 1890VM7Ya) *
DDR2 SDRAM Double Data Rate 2 Synchronous Dynamic Random-Access Memory (DDR2 SDRAM) is a double data rate (DDR) synchronous dynamic random-access memory (SDRAM) interface. It superseded the original DDR SDRAM specification, and was itself superseded by DDR3 ...
controller with ECC *cache (8KB each for data and instructions) *working temperature from -60 to 125 °C


1907VM044

*development name Obrabotka-10 *0.25 µm SOI CMOS process; manufactured by Mikron *256-pin ceramic QFP *SoC including
SpaceWire SpaceWire is a spacecraft communication network based in part on the IEEE 1355 standard of communications. It is coordinated by the European Space Agency (ESA) in collaboration with international space agencies including NASA, JAXA, and RKA. ...
, GOST R 52070-2003 (
MIL-STD-1553 MIL-STD-1553 is a military standard published by the United States Department of Defense that defines the mechanical, electrical, and functional characteristics of a serial data bus. It was originally designed as an avionic data bus for use with ...
), SPI, 32
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs ) board which may be used as an input or output, or both, and is controllable by software. GPIOs have no ...
, 2
UART A universal asynchronous receiver-transmitter (UART ) is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significan ...
, 3
timers A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
,
JTAG JTAG (named after the Joint Test Action Group which codified it) is an Technical standard, industry standard for verifying designs and testing printed circuit boards after manufacture. JTAG implements standards for on-chip instrumentation in ele ...
*radiation tolerance to not less than 200 kRad *
triple modular redundancy Triple is used in several contexts to mean "threefold" or a " treble": Sports * Triple (baseball), a three-base hit * A basketball three-point field goal * A figure skating jump with three rotations * In bowling terms, three strikes in a row * I ...
in processor core *both registers and cache (4KB each for data and instructions) are implemented as dual interlocked storage cells (DICE) with 1 parity bit per byte for cache and
Hamming code In computer science and telecommunication, Hamming codes are a family of linear error-correcting codes. Hamming codes can detect one-bit and two-bit errors, or correct one-bit errors without detection of uncorrected errors. By contrast, the sim ...
for registers *
SECDED In computer science and telecommunication, Hamming codes are a family of linear error-correcting codes. Hamming codes can detect one-bit and two-bit errors, or correct one-bit errors without detection of uncorrected errors. By contrast, the sim ...
for external memory *working temperature from -60 to 125 °C


1907VM056

*development name Skhema-23 *0.25 µm SOI CMOS process; manufactured by Mikron *407-pin ceramic
PGA PGA is an acronym or initialism that may stand for: Aviation * IATA code for Page Municipal Airport, Coconino County, Arizona * ICAO designator for Portugália, regional airline based in Lisbon, Portugal * Abbreviation for Prince George Airport ...
*SoC including 8-channel
SpaceWire SpaceWire is a spacecraft communication network based in part on the IEEE 1355 standard of communications. It is coordinated by the European Space Agency (ESA) in collaboration with international space agencies including NASA, JAXA, and RKA. ...
, GOST R 52070-2003 (
MIL-STD-1553 MIL-STD-1553 is a military standard published by the United States Department of Defense that defines the mechanical, electrical, and functional characteristics of a serial data bus. It was originally designed as an avionic data bus for use with ...
), SPI,
I²C I2C (Inter-Integrated Circuit, ), alternatively known as I2C or IIC, is a synchronous, multi-controller/multi-target (master/slave), packet switched, single-ended, serial communication bus invented in 1982 by Philips Semiconductors. It is wide ...
,
CAN bus A Controller Area Network (CAN bus) is a robust vehicle bus standard designed to allow microcontrollers and devices to communicate with each other's applications without a host computer. It is a message-based protocol, designed originally for mu ...
, 32
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs ) board which may be used as an input or output, or both, and is controllable by software. GPIOs have no ...
, 2
UART A universal asynchronous receiver-transmitter (UART ) is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significan ...
, 3
timers A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
,
JTAG JTAG (named after the Joint Test Action Group which codified it) is an Technical standard, industry standard for verifying designs and testing printed circuit boards after manufacture. JTAG implements standards for on-chip instrumentation in ele ...
*cache (8KB each for data and instructions)


1907VM066

*development name Obrabotka-26 *0.25 µm silicon on insulator (SOI)
CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...
process; manufactured by Mikron *407-pin ceramic
PGA PGA is an acronym or initialism that may stand for: Aviation * IATA code for Page Municipal Airport, Coconino County, Arizona * ICAO designator for Portugália, regional airline based in Lisbon, Portugal * Abbreviation for Prince George Airport ...
*SoC including 4-channel
SpaceWire SpaceWire is a spacecraft communication network based in part on the IEEE 1355 standard of communications. It is coordinated by the European Space Agency (ESA) in collaboration with international space agencies including NASA, JAXA, and RKA. ...
, GOST R 52070-2003 (
MIL-STD-1553 MIL-STD-1553 is a military standard published by the United States Department of Defense that defines the mechanical, electrical, and functional characteristics of a serial data bus. It was originally designed as an avionic data bus for use with ...
), SPI,
I²C I2C (Inter-Integrated Circuit, ), alternatively known as I2C or IIC, is a synchronous, multi-controller/multi-target (master/slave), packet switched, single-ended, serial communication bus invented in 1982 by Philips Semiconductors. It is wide ...
,
RapidIO The RapidIO architecture is a high-performance packet-switched electrical connection technology. RapidIO supports messaging, read/write and cache coherency semantics. Based on industry-standard electrical specifications such as those for Ethern ...
,
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs ) board which may be used as an input or output, or both, and is controllable by software. GPIOs have no ...
, 2
UART A universal asynchronous receiver-transmitter (UART ) is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significan ...
, 3
timers A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
,
JTAG JTAG (named after the Joint Test Action Group which codified it) is an Technical standard, industry standard for verifying designs and testing printed circuit boards after manufacture. JTAG implements standards for on-chip instrumentation in ele ...
,
PCI PCI may refer to: Business and economics * Payment card industry, businesses associated with debit, credit, and other payment cards ** Payment Card Industry Data Security Standard, a set of security requirements for credit card processors * Pro ...
, co-processor for image processing *cache (8KB each for data and instructions)


1907VK016

*development name Obrabotka-29 *0.25 µm silicon on insulator (SOI)
CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...
process; manufactured by Mikron *
PGA PGA is an acronym or initialism that may stand for: Aviation * IATA code for Page Municipal Airport, Coconino County, Arizona * ICAO designator for Portugália, regional airline based in Lisbon, Portugal * Abbreviation for Prince George Airport ...
*SoC including 4-channel
SpaceWire SpaceWire is a spacecraft communication network based in part on the IEEE 1355 standard of communications. It is coordinated by the European Space Agency (ESA) in collaboration with international space agencies including NASA, JAXA, and RKA. ...
, GOST R 52070-2003 (
MIL-STD-1553 MIL-STD-1553 is a military standard published by the United States Department of Defense that defines the mechanical, electrical, and functional characteristics of a serial data bus. It was originally designed as an avionic data bus for use with ...
), SPI, 32
GPIO A general-purpose input/output (GPIO) is an uncommitted digital signal pin on an integrated circuit or electronic circuit (e.g. MCUs/ MPUs ) board which may be used as an input or output, or both, and is controllable by software. GPIOs have no ...
, 2
UART A universal asynchronous receiver-transmitter (UART ) is a computer hardware device for asynchronous serial communication in which the data format and transmission speeds are configurable. It sends data bits one by one, from the least significan ...
, 3
timers A timer is a specialized type of clock used for measuring specific time intervals. Timers can be categorized into two main types. The word "timer" is usually reserved for devices that counts down from a specified time interval, while devices th ...
, 128KB SRAM *
triple modular redundancy Triple is used in several contexts to mean "threefold" or a " treble": Sports * Triple (baseball), a three-base hit * A basketball three-point field goal * A figure skating jump with three rotations * In bowling terms, three strikes in a row * I ...
in processor core


See also

*
KOMDIV-64 The KOMDIV-64 (russian: КОМДИВ-64) is a family of 64-bit microprocessors developed by the Scientific Research Institute of System Development (NIISI) of the Russian Academy of Sciences and manufactured by TSMC, UMC, GlobalFoundries, and X-Fa ...
, 64-bit MIPS processors developed by NIISI *
Mongoose-V The Mongoose-V 32-bit microprocessor for spacecraft onboard computer applications is a radiation-hardened and expanded 10–15 MHz version of the MIPS R3000 CPU. Mongoose-V was developed by Synova of Melbourne, Florida, USA, with support from ...
, a 32-bit MIPS processor for spacecraft applications developed for
NASA The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research. NASA was established in 1958, succeeding t ...
*
Soviet integrated circuit designation Soviet integrated circuit designation is an industrial specification for encoding of names of integrated circuits manufactured in the Soviet Union and Post-Soviet Union countries. 25 years after the dissolution of the Soviet Union, a number of ...


References

{{List of Soviet microprocessors Radiation-hardened microprocessors Avionics computers MIPS implementations 32-bit microprocessors