KENTORT II
   HOME

TheInfoList



OR:

KENTORT II is an above-ground
shale oil extraction Shale oil extraction is an industrial process for unconventional oil production. This process converts kerogen in oil shale into shale oil by pyrolysis, hydrogenation, or thermal dissolution. The resultant shale oil is used as fuel oil or up ...
process developed by the Center for Applied Energy Research of the
University of Kentucky The University of Kentucky (UK, UKY, or U of K) is a Public University, public Land-grant University, land-grant research university in Lexington, Kentucky. Founded in 1865 by John Bryan Bowman as the Agricultural and Mechanical College of Kentu ...
. It is a hot recycled solids
fluidized bed A fluidized bed is a physical phenomenon that occurs when a solid particulate substance (usually present in a holding vessel) is under the right conditions so that it behaves like a fluid. The usual way to achieve a fluidize bed is to pump pressur ...
retorting process developed since 1982 for processing the eastern
United States The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...
Devonian The Devonian ( ) is a geologic period and system of the Paleozoic era, spanning 60.3 million years from the end of the Silurian, million years ago (Mya), to the beginning of the Carboniferous, Mya. It is named after Devon, England, whe ...
oil shale Oil shale is an organic-rich fine-grained sedimentary rock containing kerogen (a solid mixture of organic chemical compounds) from which liquid hydrocarbons can be produced. In addition to kerogen, general composition of oil shales constitute ...
s. The concept of this process was initiated in 1986 in the test unit. The KENTORT II retort consists of four fluidized bed vessels, configured in cascade. The raw oil shale is fed to the
pyrolysis The pyrolysis (or devolatilization) process is the thermal decomposition of materials at elevated temperatures, often in an inert atmosphere. It involves a change of chemical composition. The word is coined from the Greek-derived elements ''py ...
vessel the pyrolysis section, where it is fluidized by a mixture of steam and product
oil shale gas Oil shale gas (also: retort gas or retorting gas) is a synthetic non-condensable gas mixture (syngas) produced by oil shale thermal processing (pyrolysis). Although often referred to as shale gas, it differs from the natural gas produced from shale ...
from the gasification section below. Heat is transferred to the raw oil shale by a combination of fluidizing gas and recirculating hot
spent shale Spent shale or spent oil shale (also known as retorted shale) is a solid residue from the shale oil extraction process of producing synthetic shale oil from oil shale. It consists of inorganic compounds (minerals) and remaining organic matter kno ...
from the gasification section. The pyrolysis takes place at to . The pyrolyzed oil shale moves by gravity downward to the gasification section. Gasification, which takes place at to , converts remained
carbon Carbon () is a chemical element with the symbol C and atomic number 6. It is nonmetallic and tetravalent In chemistry, the valence (US spelling) or valency (British spelling) of an element is the measure of its combining capacity with o ...
in the spent shale (
char Char may refer to: People *Char Fontane, American actress *Char Margolis, American spiritualist * René Char (1907–1988), French poet *The Char family of Colombia: ** Fuad Char, Colombian senator ** Alejandro Char Chaljub, mayor of Barranquilla ...
) to product oil shale gas. Steam from the cooling zone is used for fluidizing the sent shale while heat transferred by hot solids (oil shale ash) from the combustion section. The spent shale moves to the combustion section where it is burnt to heat the process, while oil shale ash moves to the cooling section before its removal from the retort.


See also

*
Galoter process The Galoter process (also known as TSK, UTT, or SHC; its newest modifications are called Enefit and Petroter) is a shale oil extraction technology for a production of shale oil, a type of synthetic crude oil. In this process, the oil shale is d ...
* Alberta Taciuk Process * Petrosix process *
Kiviter process The Kiviter process is an above ground retorting technology for shale oil extraction. History The Kiviter process is based on the earlier vertical retort technology (Pintsch's generator). This technology underwent a long process of development. ...
*
TOSCO II process The TOSCO II process is an above ground retorting technology for shale oil extraction, which uses fine particles of oil shale that are heated in a rotating kiln. The particularity of this process is that it use hot ceramic balls for the heat tran ...
*
Fushun process The Fushun process is an above-ground retorting technology for shale oil extraction. It is named after the main production site of Fushun, Liaoning province in northeastern China. History The Fushun process was developed and utilized for the extra ...
*
Paraho process The Paraho process is an above ground retorting technology for shale oil extraction. The name "Paraho" is delivered from the words "''para homem''", which means in Portuguese "for mankind". History The Paraho process was invented by John B. Jones, ...
* Lurgi-Ruhrgas process * Chevron STB process *
LLNL HRS process LLNL HRS (hot recycled solid) process is an above-ground shale oil extraction technology. It is classified as a hot recycled solids technology. History The process was developed by the Lawrence Livermore National Laboratory. In 1984–1987, La ...


References

{{Reflist Oil shale technology Thermal treatment