Kingston Shipyards was a Canadian shipbuilder and ship repair company that operated from 1910 to 1968. The facility was located on the Kingston waterfront property known as Mississauga Point, which is the now the site of the

Marine Museum of the Great Lakes at Kingston The Marine Museum of the Great Lakes is a museum dedicated to marine history in the Great Lakes. It is located at 55 Ontario St. in Kingston, Ontario, which is also a designated National Historic Sites of Canada, National Historic Site of Canada ...

History

Marine Railway Company

In 1836 the British Board of Ordnance transferred control of the Kingston waterfront property, Mississauga Point, from the military to local businessmen. John Counter, Henry Gildersleeve, and Thomas Kirkpatrick created the Marine Railway Company to service the shipping traffic on

Lake Ontario Lake Ontario is one of the five Great Lakes of North America. It is bounded on the north, west, and southwest by the Canadian province of Ontario, and on the south and east by the U.S. state of New York. The Canada–United States border sp ...

and the

St. Lawrence River The St. Lawrence River (french: Fleuve Saint-Laurent, ) is a large river in the middle latitudes of North America. Its headwaters begin flowing from Lake Ontario in a (roughly) northeasterly direction, into the Gulf of St. Lawrence, connecting ...

. By 1839 the company had built a small

dry dock A dry dock (sometimes drydock or dry-dock) is a narrow basin or vessel that can be flooded to allow a load to be floated in, then drained to allow that load to come to rest on a dry platform. Dry docks are used for the construction, maintenance, ...

, an engine

foundry A foundry is a factory that produces metal castings. Metals are cast into shapes by melting them into a liquid, pouring the metal into a mold, and removing the mold material after the metal has solidified as it cools. The most common metals pr ...

, two wharves and a

marine railway The patent slip or marine railway is an inclined plane extending from shoreline into water, featuring a "cradle" onto which a ship is first floated, and a mechanism to haul the ship, attached to the cradle, out of the water onto a slip. The m ...

. In 1848 a large three storey warehouse was constructed.

Steam power A steam engine is a heat engine that performs mechanical work using steam as its working fluid. The steam engine uses the force produced by steam pressure to push a piston back and forth inside a cylinder. This pushing force can be trans ...

was added to the marine railway in 1851 and additional stone outbuildings were constructed in 1854. The Marine Railway Company advertised its facilities in 1862. The company claimed to own a marine railway with steam

sawmill A sawmill (saw mill, saw-mill) or lumber mill is a facility where logs are cut into lumber. Modern sawmills use a motorized saw to cut logs lengthwise to make long pieces, and crosswise to length depending on standard or custom sizes (dimensi ...

, workshops and offices, sixteen stone cottages, a large foundry known as the Ontario foundry, five large three and four storey fireproof warehouses and many wharves. Over two hundred men were employed to overhaul and service seven vessels at a time. At its time, it was the largest shipbuilding effort west of Quebec.

First World War

In 1910

Collingwood Shipyards Collingwood Shipbuilding was a major Canadian shipbuilder of the late 19th and 20th centuries. The facility was located in the Great Lakes and saw its business peak during the Second World War. The shipyard primarily constructed lake freighters ...

opened a subsidiary shipbuilding and repair plant in Kingston. The government dry dock was rented and purchased, and three government contracts for ships were secured. Several small jobs followed until the

First World War World War I (28 July 1914 11 November 1918), often abbreviated as WWI, was one of the deadliest global conflicts in history. Belligerents included much of Europe, the Russian Empire, the United States, and the Ottoman Empire, with fightin ...

in 1915. War contracts required 8

minesweeper A minesweeper is a small warship designed to remove or detonate naval mines. Using various mechanisms intended to counter the threat posed by naval mines, minesweepers keep waterways clear for safe shipping. History The earliest known usage of ...

s for the

Royal Navy The Royal Navy (RN) is the United Kingdom's naval warfare force. Although warships were used by English and Scottish kings from the early medieval period, the first major maritime engagements were fought in the Hundred Years' War against F ...

and the

Royal Canadian Navy The Royal Canadian Navy (RCN; french: Marine royale canadienne, ''MRC'') is the Navy, naval force of Canada. The RCN is one of three environmental commands within the Canadian Armed Forces. As of 2021, the RCN operates 12 frigates, four attack s ...

and thus the workforce increased to over 1000 workers.

Depression

Manager D. Thompson headed the firm during the

Great Depression The Great Depression (19291939) was an economic shock that impacted most countries across the world. It was a period of economic depression that became evident after a major fall in stock prices in the United States. The economic contagio ...

keeping a crew of six to eight men onsite. Parties of workers were hired on the spot on a jobbed basis.

Second World War

The first three

corvette A corvette is a small warship. It is traditionally the smallest class of vessel considered to be a proper (or " rated") warship. The warship class above the corvette is that of the frigate, while the class below was historically that of the slo ...

s were ordered to be constructed in 1940. This was the first construction contract since 1923. The workforce grew to over 1500 as

and

construction progressed. The last wartime contracts were for seven seagoing

steam tugs Steam is a substance containing water in the gas phase, and sometimes also an aerosol of liquid water droplets, or air. This may occur due to evaporation or due to boiling, where heat is applied until water reaches the enthalpy of vaporization. ...

which were finished after the war had ended.

Canada Steamship Lines takes over

In 1947 the yard was bought by the

Canada Steamship Lines Canada Steamship Lines (CSL) is a shipping company with headquarters in Montreal, Quebec, Canada. The business has been operating for well over a century and a half. Beginnings CSL had humble beginnings in Canada East in 1845, operating river boa ...

. This rejuvenated the shipyard business as the fleet of canallers owned by the Canada Steamship Lines provided repair work for the yard. The Kingston Shipyards throughout the 1950s was occupied with building tugs,

barges Barge nowadays generally refers to a flat-bottomed boat, flat-bottomed inland waterway vessel which does not have its own means of mechanical propulsion. The first modern barges were pulled by tugs, but nowadays most are pushed by Pusher (boat) ...

and pontoons.

Final years

The opening of the

St. Lawrence Seaway The St. Lawrence Seaway (french: la Voie Maritime du Saint-Laurent) is a system of locks, canals, and channels in Canada and the United States that permits oceangoing vessels to travel from the Atlantic Ocean to the Great Lakes of North Americ ...

in 1959 made the fleet of canallers obsolete. With no canaller fleet wintering in Kingston, the yard lost the majority of its work. In 1967 Canada Steamship Lines shut down the site and all the equipment was to be sold or transferred to Collingwood Shipyards. The property was sold in 1968, and in 1974 acquired by the establishment of the current Marine Museum of the Great lakes at Kingston.

Shipbuilding history

References

{{Reflist, 30em Shipbuilding companies of Canada Defunct companies of Ontario Defunct manufacturing companies of Canada Companies based in Kingston, Ontario History of shipbuilding in Ontario Manufacturing companies established in 1910 Manufacturing companies disestablished in 1968 1910 establishments in Ontario 1968 disestablishments in Ontario