History
Various types of stilts have been developed over the centuries:Tripod stilt
The tripod stilt, which has three legs with a raised point on each end, appears to have been developed in China at least as far back as the third century AD. Tripod stilts have been found during excavations in Ur. It was adopted by the Islamic world in the 9th century AD and was later adopted by the Byzantines around the start of the 13th century. The use of this stilt can be deduced from damage to the glaze where the three raised points were in direct contact with it. A similar type of stilt appears to have been used in the Staffordshire area and perhaps Scotland between the 1760s and 1850s.Ring stilt
Ring stilts, which consist of a ring with three raised points of clay placed at equal distances around the rim, were in use in the second half of the 18th century.Crown stilt
Crown stilts were in use during much the same time period as ring stilts.Other types
A stilt has been found at a Roman kiln site near Holt, Wrexham County Borough dating to around the first or second century AD. It was designed to be used within aArchaeology
In archaeology, they may be upside-down baked clay tripods, leaving characteristic marks at the bottoms of the pottery/porcelain. They expose the bottom of the fired piece to the full heat and prevent the pieces from sticking to each other.Manufacture
In the 19th century centralised industrial production of molded three-arm stilts began common in the UK with Staffordshire exporting them to other parts of the country. Some of the manufactures appear to have used distinctive mold designs. Stilts are still used and produced today and are marketed by pottery suppliers.Non-pottery uses
Some researchers have used kiln stilts as a settlement substrate for coral larva including those of the species ''References
Pottery {{Pottery