Kainosymmetry
   HOME

TheInfoList



OR:

Kainosymmetry (from Greek "new") describes the first
atomic orbital In atomic theory and quantum mechanics, an atomic orbital is a function describing the location and wave-like behavior of an electron in an atom. This function can be used to calculate the probability of finding any electron of an atom in any spe ...
of each
azimuthal quantum number The azimuthal quantum number is a quantum number for an atomic orbital that determines its orbital angular momentum and describes the shape of the orbital. The azimuthal quantum number is the second of a set of quantum numbers that describe t ...
(ℓ). Such orbitals include 1s, 2p, 3d, 4f, 5g, and so on. The term kainosymmetric was coined by .
Pekka Pyykkö Veli Pekka Pyykkö (born 12 October 1941) is a Finnish academic. He was professor of Chemistry at the University of Helsinki. From 2009–2012, he was the chairman of the International Academy of Quantum Molecular Science. He is known for his ...
referred to such orbitals as primogenic instead. Such orbitals are much smaller than all other orbitals with the same ℓ and have no radial nodes, giving the elements that fill them special properties. They are usually less
metal A metal (from Greek μέταλλον ''métallon'', "mine, quarry, metal") is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typicall ...
lic than their heavier homologues, prefer lower
oxidation state In chemistry, the oxidation state, or oxidation number, is the hypothetical charge of an atom if all of its bonds to different atoms were fully ionic. It describes the degree of oxidation (loss of electrons) of an atom in a chemical compound. C ...
s, and have smaller atomic and
ionic radii Ionic radius, ''r''ion, is the radius of a monatomic ion in an ionic crystal structure. Although neither atoms nor ions have sharp boundaries, they are treated as if they were hard spheres with radii such that the sum of ionic radii of the cation ...
. Contractions such as the
scandide contraction The d-block contraction (sometimes called scandide contraction) is a term used in chemistry to describe the effect of having full d orbitals on the period 4 elements. The elements in question are gallium, germanium, arsenic, selenium, bromine, ...
and
lanthanide contraction The lanthanide contraction is the greater-than-expected decrease in atomic radii/ionic radii of the elements in the lanthanide series from atomic number 57, lanthanum, to 71, lutetium, which results in smaller than otherwise expected atomic rad ...
may be considered to be a general incomplete shielding effect in terms of how they impact the properties of the succeeding elements. The kainosymmetric 2p, 3d, and 4f orbitals screen the nuclear charge incompletely, and therefore the valence electrons that fill immediately after the completion of such a core subshell are more tightly bound by the nucleus than would be expected. 1s is an exception, providing nearly complete shielding. This is in particular the reason why
sodium Sodium is a chemical element with the symbol Na (from Latin ''natrium'') and atomic number 11. It is a soft, silvery-white, highly reactive metal. Sodium is an alkali metal, being in group 1 of the periodic table. Its only stable iso ...
has a first
ionisation energy Ionization, or Ionisation is the process by which an atom or a molecule acquires a negative or positive charge by gaining or losing electrons, often in conjunction with other chemical changes. The resulting electrically charged atom or molecule i ...
of 495.8 kJ/mol that is only slightly smaller than that of
lithium Lithium (from el, λίθος, lithos, lit=stone) is a chemical element with the symbol Li and atomic number 3. It is a soft, silvery-white alkali metal. Under standard conditions, it is the least dense metal and the least dense solid el ...
, 520.2 kJ/mol, and why lithium acts as less
electronegative Electronegativity, symbolized as , is the tendency for an atom of a given chemical element to attract shared electrons (or electron density) when forming a chemical bond. An atom's electronegativity is affected by both its atomic number and the d ...
than sodium in simple σ-bonded alkali metal compounds; sodium suffers an incomplete shielding effect from the preceding 2p elements, but lithium essentially does not. Kainosymmetry also explains the specific properties of the 1s, 2p, 3d, and 4f elements. The 1s elements
hydrogen Hydrogen is the chemical element with the symbol H and atomic number 1. Hydrogen is the lightest element. At standard conditions hydrogen is a gas of diatomic molecules having the formula . It is colorless, odorless, tasteless, non-toxic, an ...
and
helium Helium (from el, ἥλιος, helios, lit=sun) is a chemical element with the symbol He and atomic number 2. It is a colorless, odorless, tasteless, non-toxic, inert, monatomic gas and the first in the noble gas group in the periodic table. ...
are extremely different from all others, because 1s is the only orbital that is completely unscreened from the nucleus, and there is no other orbital of similar energy for it to hybridise with (it also does not polarise easily). The 1s orbital of hydrogen binds to both (n−1)d and ns orbitals of
transition element In chemistry, a transition metal (or transition element) is a chemical element in the d-block of the periodic table (groups 3 to 12), though the elements of group 12 (and less often group 3) are sometimes excluded. They are the elements that can ...
s, while most other ligands bind only to (n−1)d. The 2p subshell is small and of a similar radial extent as the 2s subshell, which facilitates
orbital hybridisation In chemistry, orbital hybridisation (or hybridization) is the concept of mixing atomic orbitals to form new ''hybrid orbitals'' (with different energies, shapes, etc., than the component atomic orbitals) suitable for the pairing of electrons to f ...
. This does not work as well for the heavier p elements: for example,
silicon Silicon is a chemical element with the symbol Si and atomic number 14. It is a hard, brittle crystalline solid with a blue-grey metallic luster, and is a tetravalent metalloid and semiconductor. It is a member of group 14 in the periodic tab ...
in
silane Silane is an inorganic compound with chemical formula, . It is a colourless, pyrophoric, toxic gas with a sharp, repulsive smell, somewhat similar to that of acetic acid. Silane is of practical interest as a precursor to elemental silicon. Sila ...
(SiH4) shows approximate sp2 hybridisation, whereas
carbon Carbon () is a chemical element with the symbol C and atomic number 6. It is nonmetallic and tetravalent In chemistry, the valence (US spelling) or valency (British spelling) of an element is the measure of its combining capacity with o ...
in
methane Methane ( , ) is a chemical compound with the chemical formula (one carbon atom bonded to four hydrogen atoms). It is a group-14 hydride, the simplest alkane, and the main constituent of natural gas. The relative abundance of methane on Eart ...
(CH4) shows an almost ideal sp3 hybridisation. The bonding in these nonorthogonal heavy p element hydrides is weakened; this situation worsens with more electronegative substituents as they magnify the difference in energy between the s and p subshells. The heavier p elements are often more stable in their higher oxidation states in organometallic compounds than in compounds with electronegative ligands. This follows
Bent's rule In chemistry, Bent's rule describes and explains the relationship between the orbital hybridization of central atoms in molecules and the electronegativities of substituents. The rule was stated by Henry A. Bent as follows: The chemical structu ...
: s character is concentrated in the bonds to the more electropositive substituents, while p character is concentrated in the bonds to the more electronegative substituents. Furthermore, the 2p elements prefer to participate in
multiple bond In chemistry, bond order, as introduced by Linus Pauling, is defined as the difference between the number of bonds and anti-bonds. The bond order itself is the number of electron pairs (covalent bonds) between two atoms. For example, in diatomi ...
ing (observed in O=O and N≡N) to eliminate Pauli repulsion from the otherwise close s and p lone pairs: their
π bonds In chemistry, pi bonds (π bonds) are covalent bond, covalent chemical chemical bond, bonds, in each of which two lobes of an atomic orbital, orbital on one atom overlap with two lobes of an orbital on another atom, and in which this overlap oc ...
are stronger and their
single bond In chemistry, a single bond is a chemical bond between two atoms involving two valence electrons. That is, the atoms share one pair of electrons where the bond forms. Therefore, a single bond is a type of covalent bond. When shared, each of th ...
s weaker. The small size of the 2p shell is also responsible for the extremely high electronegativities of the 2p elements. The 3d elements show the opposite effect; the 3d orbitals are smaller than would be expected, with a radial extent similar to the 3p core shell, which weakens bonding to ligands because they cannot overlap with the ligands' orbitals well enough. These bonds are therefore stretched and therefore weaker compared to the homologous ones of the 4d and 5d elements (the 5d elements show an additional d-expansion due to relativistic effects). This also leads to low-lying excited states, which is probably related to the well-known fact that 3d compounds are often coloured (the light absorbed is visible). This also explains why the 3d contraction has a stronger effect on the following elements than the 4d or 5d ones do. As for the 4f elements, the difficulty that 4f has in being used for chemistry is also related to this, as are the strong incomplete screening effects; the 5g elements may show a similar contraction, but it is likely that relativistic effects will partly counteract this, as they would tend to cause expansion of the 5g shell. Another consequence is the increased metallicity of the following elements in a block after the first kainosymmetric orbital, along with a preference for higher oxidation states. This is visible comparing H and He (1s) with Li and Be (2s); N–F (2p) with P–Cl (3p); Fe and Co (3d) with Ru and Rh (4d); and Nd–Dy (4f) with U–Cf (5f). As kainosymmetric orbitals appear in the even rows (except for 1s), this creates an even–odd difference between periods from period 2 onwards: elements in even periods are smaller and have more oxidising higher oxidation states (if they exist), whereas elements in odd periods differ in the opposite direction. The difference between kainosymmetric elements and subsequent ones has been called the first-row anomaly. It has been used to argue that helium should be placed over
beryllium Beryllium is a chemical element with the symbol Be and atomic number 4. It is a steel-gray, strong, lightweight and brittle alkaline earth metal. It is a divalent element that occurs naturally only in combination with other elements to form mi ...
rather than
neon Neon is a chemical element with the symbol Ne and atomic number 10. It is a noble gas. Neon is a colorless, odorless, inert monatomic gas under standard conditions, with about two-thirds the density of air. It was discovered (along with krypton ...
, on the grounds that that would constitute the most extreme case of the first-row anomaly. Scerri, Eric R (2020). ''The Periodic Table, Its Story and Its Significance'', 2nd edition, Oxford University Press, New York, .


References

{{reflist Angular momentum Atomic physics Inorganic chemistry Periodic table Quantum numbers