The Junkers Jumo 004 was the world's first production
turbojet
The turbojet is an airbreathing jet engine which is typically used in aircraft. It consists of a gas turbine with a propelling nozzle. The gas turbine has an air inlet which includes inlet guide vanes, a compressor, a combustion chamber, and ...
engine in operational use, and the first successful
axial compressor
An axial compressor is a gas compressor that can continuously pressurize gases. It is a rotating, airfoil-based compressor in which the gas or working fluid principally flows parallel to the axis of rotation, or axially. This differs from other ...
turbojet engine. Some 8,000 units were manufactured by
Junkers
Junkers Flugzeug- und Motorenwerke AG (JFM, earlier JCO or JKO in World War I, English: Junkers Aircraft and Motor Works) more commonly Junkers , was a major German aircraft and aircraft engine manufacturer. It was founded there in Dessau, Germ ...
in Germany late in
World War II
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposin ...
, powering the
Messerschmitt Me 262
The Messerschmitt Me 262, nicknamed ''Schwalbe'' (German: "Swallow") in fighter versions, or ''Sturmvogel'' (German: "Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the Germa ...
fighter and the
Arado Ar 234
The Arado Ar 234 ''Blitz'' (English: lightning) is a jet-powered bomber designed and produced by the German aircraft manufacturer Arado. It was the world's first operational turbojet-powered bomber, seeing service during the latter half of the ...
reconnaissance/bomber, along with prototypes, including the
Horten Ho 229
The Horten H.IX, RLM designation Ho 229 (or Gotha Go 229 for extensive re-design work done by Gotha to prepare the aircraft for mass production) was a German prototype fighter/bomber initially designed by Reimar and Walter Horten to be built ...
. Variants and copies of the engine were produced in Eastern Europe and the USSR for several years following the end of WWII.
Design and development
The feasibility of jet propulsion had been demonstrated in Germany in early 1937 by
Hans von Ohain
Hans Joachim Pabst von Ohain (14 December 191113 March 1998) was a German physicist, engineer, and the designer of the first operational jet engine. Together with Frank Whittle he is called the "father of the jet engine". His first test unit ran ...
working with the
Heinkel
Heinkel Flugzeugwerke () was a German aircraft manufacturing company founded by and named after Ernst Heinkel. It is noted for producing bomber aircraft for the Luftwaffe in World War II and for important contributions to high-speed flight, with ...
company. Most of the Reich Air Ministry (
RLM) remained uninterested, but
Helmut Schelp
Helmut Schelp was the director of advanced engine development at the RLM's T-Amt technical division leading up to and during World War II. He used his office to fund a widespread program in jet engine development, which led to many of the engine c ...
and
Hans Mauch
Hans Adolph Mauch (6 March 1906 – 20 January 1984) was an engineer known for his work in early jet engine development in Germany, and aeromedical and prosthesis work in the USA in the post-war era. His S-N-S artificial leg design remains in wi ...
saw the potential of the concept and encouraged Germany's aero engine manufacturers to begin their own programmes of jet engine development. The companies remained skeptical and little new development was carried out.
In 1939 Schelp and Mauch visited the companies to check up on progress. Otto Mader, head of the ''Junkers Motorenwerke'' (Jumo) division of the large
Junkers
Junkers Flugzeug- und Motorenwerke AG (JFM, earlier JCO or JKO in World War I, English: Junkers Aircraft and Motor Works) more commonly Junkers , was a major German aircraft and aircraft engine manufacturer. It was founded there in Dessau, Germ ...
aviation firm, stated that even if the concept was useful, he had no one to work on it. Schelp responded by stating that Dr
Anselm Franz Anselm Franz (January 20, 1900—November 18, 1994) was a pioneering Austrian jet engine engineer known for the development of the Jumo 004, the world's first mass-produced turbojet engine by Nazi Germany during World War II, and his work on turbosh ...
, then in charge of Junkers'
turbo- and
supercharger
In an internal combustion engine, a supercharger compresses the intake gas, forcing more air into the engine in order to produce more power for a given displacement.
The current categorisation is that a supercharger is a form of forced induct ...
development, would be perfect for the job. Franz started his development team later that year, and the project was given the RLM designation 109-004 (the 109- prefix, assigned by the
RLM was common to all
reaction engine
A reaction engine is an engine or motor that produces thrust by expelling reaction mass, in accordance with Newton's third law of motion. This law of motion is commonly paraphrased as: "For every action force there is an equal, but opposite, rea ...
projects in WW II Germany, including
German WW II rocket engine designs for manned aircraft).
Franz opted for a design that was at once conservative and revolutionary. His design differed from von Ohain's in that he utilised a new type of
compressor
A compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor.
Compressors are similar to pumps: both increase the pressure on a fluid and both can transp ...
which allowed a continuous, straight flow of air through the engine (an ''
axial compressor
An axial compressor is a gas compressor that can continuously pressurize gases. It is a rotating, airfoil-based compressor in which the gas or working fluid principally flows parallel to the axis of rotation, or axially. This differs from other ...
''), recently developed by the ''
Aerodynamische Versuchsanstalt
The ''Aerodynamische Versuchsanstalt'' (AVA) in Göttingen was one of the four predecessor organizations of the 1969 founded "German Research and Experimental Institute for Aerospace", which in 1997 was renamed in German Aerospace Center (DLR).
...
'' (AVA – Aerodynamic Research Institute) at
Göttingen
Göttingen (, , ; nds, Chöttingen) is a college town, university city in Lower Saxony, central Germany, the Capital (political), capital of Göttingen (district), the eponymous district. The River Leine runs through it. At the end of 2019, t ...
. The axial-flow compressor not only had excellent performance, about 78% efficient in "real world" conditions, but it also had a smaller cross-section, important for high-speed aircraft. Dr. Bruno Bruckman's old assistant on the jet engine program, Dr. Österich, took over for him in Berlin, and selected the axial flow design, due to its smaller diameter; it was less than the competing axial-flow
BMW 003
The BMW 003 (full RLM designation 109-003) is an early axial turbojet engine produced by BMW AG in Germany during World War II. The 003 and the Junkers Jumo 004 were the only German turbojet engines to reach production during World War II.
...
.
On the other hand, he aimed to produce an engine that was far below its theoretical potential, in the interests of expediting development and simplifying production. One major decision was to opt for a simple combustion area using six "
flame can
A flame (from Latin ''flamma'') is the visible, gaseous part of a fire. It is caused by a highly exothermic chemical reaction taking place in a thin zone. When flames are hot enough to have ionized gaseous components of sufficient density they a ...
s", instead of the more efficient single
annular can. For the same reasons, he collaborated heavily on the development of the engine's
turbine
A turbine ( or ) (from the Greek , ''tyrbē'', or Latin ''turbo'', meaning vortex) is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. The work produced by a turbine can be used for generating e ...
with ''
Allgemeine Elektrizitäts-Gesellschaft
Allgemeine Elektricitäts-Gesellschaft AG (AEG; ) was a German producer of electrical equipment founded in Berlin as the ''Deutsche Edison-Gesellschaft für angewandte Elektricität'' in 1883 by Emil Rathenau. During the World War II, Second W ...
'' (General Electric Company, AEG) in
Berlin
Berlin ( , ) is the capital and largest city of Germany by both area and population. Its 3.7 million inhabitants make it the European Union's most populous city, according to population within city limits. One of Germany's sixteen constitue ...
, and instead of building development engines, opted to begin work immediately on the prototype of an engine that could be put straight into production. Franz's conservative approach came under question from the RLM, but was vindicated when even given the developmental problems that it was to face, the 004 entered production and service well ahead of the BMW 003, its more technologically advanced but slightly lower thrust competitor (7.83 kN/1,760 lbf).
At Kolbermoor, location of the
Heinkel
Heinkel Flugzeugwerke () was a German aircraft manufacturing company founded by and named after Ernst Heinkel. It is noted for producing bomber aircraft for the Luftwaffe in World War II and for important contributions to high-speed flight, with ...
-
Hirth
Hirth Engines GmbH is an engine manufacturer based in Benningen, Germany. It is currently a part of the UMS Aero Group. Hirth began manufacturing aero engines in the 1920s, was taken over by Heinkel in WWII to develop the Heinkel-Hirth jet en ...
engine works, the post-war
Fedden Mission
The Fedden Mission was a British scientific mission sent by the Ministry of Aircraft Production to Germany at the end of the Second World War in Europe, to gather technical intelligence about German aircraft and aeroengines. It was named for the ...
, led by Sir
Roy Fedden
Sir Alfred Hubert Roy Fedden MBE, FRAeS (6 June 1885 – 21 November 1973) was an engineer who designed most of Bristol Engine Company's successful piston aircraft engine designs.
Early life
Fedden was born in the Bristol area to fairly wealthy ...
, found jet engine manufacturing was simpler and required lower-skill labor and less sophisticated tooling than piston engine production; in fact, most of the making of hollow turbine blades and
sheet metal
Sheet metal is metal formed into thin, flat pieces, usually by an industrial process. Sheet metal is one of the fundamental forms used in metalworking, and it can be cut and bent into a variety of shapes.
Thicknesses can vary significantly; ex ...
work on jets could be done by tooling used in making automobile
body panel
A quarter panel (British English: rear wing) is the body panel (exterior surface) of an automobile between a rear door (or only door on each side for two-door models) and the trunk (boot) and typically wraps around the wheel well. The similar f ...
s. Fedden himself criticized the attachment of the 004's compressor casing, which was in two halves, bolted to the half-sections of the stator assemblies.
[Christopher, p. 70]
Technical description and testing
The first prototype 004A, which used
diesel fuel
Diesel fuel , also called diesel oil, is any liquid fuel specifically designed for use in a diesel engine, a type of internal combustion engine in which fuel ignition takes place without a spark as a result of compression of the inlet air and t ...
, was first tested in October 1940, though without an exhaust nozzle. It was bench-tested at the end of January 1941 to a maximum thrust of , and work continued to increase the thrust, the RLM contract having set a minimum of thrust.
[Pavelec, p. 32]
Vibration problems with the compressor stators, originally cantilevered from the outside,
[Engine Revolutions: The Autobiography of Max Bentele , p. 45] delayed the program at this point.
Max Bentele
Max Bentele (January 15, 1909 – May 19, 2006) was a German-born pioneer in the field of jet aircraft turbines and mechanical engineering. His contributions to the development of the Wankel engine earned him the title, "Father of the Wankel Engi ...
, as an Air Ministry consulting engineer with a background in turbocharger vibrations, assisted in solving the problem.
The original aluminium stators were replaced with steel ones in which configuration the engine developed in August, and passed a 10-hour endurance run at in December. The first flight test took place on March 15, 1942, when a 004A was carried aloft by a
Messerschmitt Bf 110
The Messerschmitt Bf 110, often known unofficially as the Me 110,Because it was built before ''Bayerische Flugzeugwerke'' became Messerschmitt AG in July 1938, the Bf 110 was never officially given the designation Me 110. is a twin-engine (Des ...
to run up the engine in flight. The 004 used an eight-stage axial-flow compressor, with six straight-through combustion chambers (made from sheet steel), and a one-stage turbine with hollow blades.
On July 18, one of the prototype
Messerschmitt Me 262
The Messerschmitt Me 262, nicknamed ''Schwalbe'' (German: "Swallow") in fighter versions, or ''Sturmvogel'' (German: "Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the Germa ...
s flew for the first time under jet power from its 004 engines, and the 004 went into production with an order from the RLM for 80 engines.
The initial 004A engines built to power the Me 262 prototypes had been built without restrictions on materials, and they used scarce raw materials such as
nickel
Nickel is a chemical element with symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel is a hard and ductile transition metal. Pure nickel is chemically reactive but large pieces are slow to ...
,
cobalt
Cobalt is a chemical element with the symbol Co and atomic number 27. As with nickel, cobalt is found in the Earth's crust only in a chemically combined form, save for small deposits found in alloys of natural meteoric iron. The free element, pr ...
, and
molybdenum
Molybdenum is a chemical element with the symbol Mo and atomic number 42 which is located in period 5 and group 6. The name is from Neo-Latin ''molybdaenum'', which is based on Ancient Greek ', meaning lead, since its ores were confused with lea ...
in quantities which were unacceptable in production. Franz realized that the Jumo 004 would have to be redesigned to incorporate a minimum of these
strategic material
Strategic material is any sort of raw material that is important to an individual's or organization's strategic plan and supply chain management. Lack of supply of strategic materials may leave an organization or government vulnerable to disru ...
s, and this was accomplished. All the hot metal parts, including the combustion chamber, were changed to
mild steel
Carbon steel is a steel with carbon content from about 0.05 up to 2.1 percent by weight. The definition of carbon steel from the American Iron and Steel Institute (AISI) states:
* no minimum content is specified or required for chromium, cobalt ...
protected by an aluminum coating, and the hollow turbine blades were produced from folded and welded Cromadur alloy (12% chromium, 18% manganese, and 70% iron) developed by
Krupp
The Krupp family (see pronunciation), a prominent 400-year-old German dynasty from Essen, is notable for its production of steel, artillery, ammunition and other armaments. The family business, known as Friedrich Krupp AG (Friedrich Krup ...
, and cooled by compressed air "bled" from the compressor. The engine's operational lifespan was shortened, but on the plus side it became easier to construct.
[ Production engines had a ]cast
Cast may refer to:
Music
* Cast (band), an English alternative rock band
* Cast (Mexican band), a progressive Mexican rock band
* The Cast, a Scottish musical duo: Mairi Campbell and Dave Francis
* ''Cast'', a 2012 album by Trespassers William
* ...
magnesium
Magnesium is a chemical element with the symbol Mg and atomic number 12. It is a shiny gray metal having a low density, low melting point and high chemical reactivity. Like the other alkaline earth metals (group 2 of the periodic ta ...
casing in two halves, one with half-sections of stator
The stator is the stationary part of a rotary system, found in electric generators, electric motors, sirens, mud motors or biological rotors. Energy flows through a stator to or from the rotating component of the system. In an electric mot ...
assemblies bolted to it. The four front stators were constructed from steel alloy blades welded to the mount; the rear five were pressed steel sheet bent over the mount and welded on. Steel alloy compressor blades dovetailled into slots in the compressor disk and were fixed by small screws. The compressor itself was mounted to a steel shaft with twelve set screw
In American English, a set screw is a screw that is used to secure an object, by pressure and/or friction, within or against another object, such as fixing a pulley or gear to a shaft. A set screw is normally used without a nut (which distingu ...
s. Jumo tried a variety of compressor blades, beginning with solid steel, later hollow sheet metal ones, welded on the taper, with their roots fitted over rhomboidal studs on the turbine wheel, to which they were pinned and brazed
Brazing is a metal-joining process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, with the filler metal having a lower melting point than the adjoining metal.
Brazing differs from we ...
.
One interesting feature of the 004 was the starter, designed by the German engineer Norbert Riedel
Norbert Riedel (* 1 April 1912 in Jägerndorf, Sudetenland, then Austria-Hungary; † 24 February 1963 in Zürs am Arlberg, Austria) was an engineer and entrepreneur.
Life
Riedel studied mechanical engineering and worked in the 1930s, first with ...
, which consisted of a 2-stroke flat engine
A flat engine is a piston engine where the cylinders are located on either side of a central crankshaft. Flat engines are also known as horizontally opposed engines, however this is distinct from the less common opposed-piston engine design, ...
behind the intake nose-cone. A hole in the front of the cone gave access to a manual pull-start if the electric starter motor failed. Two small gasoline/ oil mix tanks were fitted within the upper perimeter of the annular intake's sheet metal housing for fuelling the starter. The Riedel was also used for starting the competing BMW 003 engine, and for Heinkel's more advanced HeS 011 "mixed-flow" compressor design.
The first production model of the 004B weighed less than the 004A, and in 1943 had passed several 100-hour tests, with a time between overhauls of 50 hours being achieved.
Later in 1943 the 004B version suffered turbine blade failures which were not understood by the Junkers team. They focused on areas such as material defects, grain size and surface roughness. Eventually, in December, blade-vibration specialist Max Bentele
Max Bentele (January 15, 1909 – May 19, 2006) was a German-born pioneer in the field of jet aircraft turbines and mechanical engineering. His contributions to the development of the Wankel engine earned him the title, "Father of the Wankel Engi ...
was once again brought in during a meeting at the RLM headquarters. He identified that the failures were caused by one of the blades' natural frequencies being in the engine running range. His solution was to raise the frequency, by increasing the blade taper and shortening them by 1 millimetre, and to reduce the operating speed of the engine from 9,000 to 8,700 rpm.
It was not until early 1944 that full production could finally begin. These sorts of engineering detail challenges for the 109-004-series of jet engine designs, formed the setbacks that were the principal factor delaying the Luftwaffe's introduction of the Me 262 into squadron service.
Given the lower-quality steels used in the 004B, these engines only had a service life of 10–25 hours, perhaps twice this in the hands of a careful pilot. Another shortcoming of the engine, common to all early turbojets, was its sluggish throttle response. Worse, too much fuel could be injected into the combustion chambers by moving the throttle too quickly, causing the temperature to rise too far before the airflow increased to match the increased fuel. This overheated the turbine blades, and was a major cause for engine failures. Nevertheless, it made jet power for combat aircraft a reality for the first time.
The exhaust area of the engine used a a variable geometry nozzle known as a plug nozzle The plug nozzle is a type of nozzle which includes a centerbody or plug around which the working fluid flows. Plug nozzles have applications in aircraft, rockets, and numerous other fluid flow devices.
Hoses
Common garden hose trigger nozzles ar ...
. The plug was nicknamed the ''Zwiebel'' (German for onion, due to its shape when seen from the side). The plug moved about 40 cm (16 inch) fore-and-aft, using an electric motor-powered rack-and-pinion, to change the exhaust cross-sectional area for thrust control.
The Jumo 004 could run on three types of fuel:
* J-2, its standard fuel, a synthetic fuel
Synthetic fuel or synfuel is a liquid fuel, or sometimes gaseous fuel, obtained from syngas, a mixture of carbon monoxide and hydrogen, in which the syngas was derived from gasification of solid feedstocks such as coal or biomass or by reforming ...
produced from coal.
* Diesel oil.
* Aviation gasoline; not considered desirable due to its high rate of consumption.
Costing ''RM''10,000 for materials, the Jumo 004 also proved somewhat cheaper than the competing BMW 003
The BMW 003 (full RLM designation 109-003) is an early axial turbojet engine produced by BMW AG in Germany during World War II. The 003 and the Junkers Jumo 004 were the only German turbojet engines to reach production during World War II.
...
, which was ''RM''12,000, and cheaper than the Junkers 213 piston engine, which was ''RM''35,000. Moreover, the jets used lower-skill labor and needed only 375 hours to complete (including manufacture, assembly, and shipping), compared to 1,400 for the BMW 801
The BMW 801 was a powerful German air-cooled 14-cylinder-radial aircraft engine built by BMW and used in a number of German Luftwaffe aircraft of World War II. Production versions of the twin-row engine generated between 1,560 and 2,000 PS ( ...
.
Production and maintenance of the 004 was done at the Junkers works at Magdeburg
Magdeburg (; nds, label=Low Saxon, Meideborg ) is the capital and second-largest city of the German state Saxony-Anhalt. The city is situated at the Elbe river.
Otto I, the first Holy Roman Emperor and founder of the Archdiocese of Magdebur ...
, under the supervision of Otto Hartkopf. Completed engines earned a reputation for unreliability; the time between major overhauls (not technically a time between overhaul
Time between overhauls (abbreviated as TBO or TBOH) is the manufacturer's recommended number of running hours or calendar time before an aircraft engine or other component requires overhaul.
On rotorcraft, many components have recommended or man ...
) was thirty to fifty hours, and may have been as low as ten, though a skilled flyer could double the interval.[Christopher, p. 76] (The competing BMW 003's was about fifty.) The process involved replacing compressor blades, (which suffered the most damage, usually from ingesting stones and such, later known as fodding) and turbine blades damaged by the high thermodynamic loads. The Germans were known to use both specially-designed wire framed hemispherical cages and/or flat circular covers over the intakes to prevent ingestion of foreign matter into their aircraft jet engines' intakes while on the ground. The compressor and turbine blades' life could be extended by re-balancing the rotors during routine maintenance; the Riedel two-stroke starter engine and the turbojet's governor would also be examined and replaced as needed. Combustor
A combustor is a component or area of a gas turbine, ramjet, or scramjet engine where combustion takes place. It is also known as a burner, combustion chamber or flame holder. In a gas turbine engine, the ''combustor'' or combustion chamber is fed ...
s required maintenance every twenty hours, and replacement at 200.
Between 5,000 and 8,000 004s were built; at the end of the Second World War
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposin ...
, production stood at 1,500 per month. The Fedden Mission, led by Sir Roy Fedden
Sir Alfred Hubert Roy Fedden MBE, FRAeS (6 June 1885 – 21 November 1973) was an engineer who designed most of Bristol Engine Company's successful piston aircraft engine designs.
Early life
Fedden was born in the Bristol area to fairly wealthy ...
, postwar estimated total jet engine production by mid-1946 could have reached 100,000 units a year, or more.
Postwar production
Following World War II, Jumo 004s were built in small numbers in Malešice
Malešice is a cadastral district in Prague. It has population of approximately 10,000. The earliest reference about the village is from 1309. It became part of Prague on 1 January 1922. It lies mostly in the municipal and administrative ...
in Czechoslovakia
, rue, Чеськословеньско, , yi, טשעכאסלאוואקיי,
, common_name = Czechoslovakia
, life_span = 1918–19391945–1992
, p1 = Austria-Hungary
, image_p1 ...
, designated Avia Avia M-04, to power the Avia S-92
The Messerschmitt Me 262, nicknamed ''Schwalbe'' (German: "Swallow") in fighter versions, or ''Sturmvogel'' (German: "Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the Germ ...
which was itself a copy of the Me 262. Upgraded Jumo 004 copies were also built in the Soviet Union
The Soviet Union,. officially the Union of Soviet Socialist Republics. (USSR),. was a transcontinental country that spanned much of Eurasia from 1922 to 1991. A flagship communist state, it was nominally a federal union of fifteen national ...
as the Klimov RD-10, where they powered the Yakovlev Yak-15
The Yakovlev Yak-15 (russian: Яковлев Як-15; NATO reporting name: Feather, USAF/ DOD designation Type 2) was a first-generation Soviet turbojet fighter developed by the Yakovlev design bureau (OKB) immediately after World War II. The ...
as well as many prototype jet fighters.
In France
France (), officially the French Republic ( ), is a country primarily located in Western Europe. It also comprises of Overseas France, overseas regions and territories in the Americas and the Atlantic Ocean, Atlantic, Pacific Ocean, Pac ...
, captured 004s powered the Sud-Ouest SO 6000 Triton and the Arsenal VG-70
__NOTOC__
The Arsenal VG 70 was a single-seat monoplane research aircraft flown in France shortly after World War II to assist in the development of high-speed jet fighters. Lacking an indigenous turbojet engine, the aircraft was fitted with a ...
.
Variants
(''Data from: Kay, ''Turbojet: History and Development 1930–1960'': Volume 1: Great Britain and Germany
;109-004: scale (compressor power absorption) prototype engine, test-run with limited success.
;109-004A: Full-scale prototype and pre-production engines, powered early Messerschmitt Me 262
The Messerschmitt Me 262, nicknamed ''Schwalbe'' (German: "Swallow") in fighter versions, or ''Sturmvogel'' (German: "Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the Germa ...
and Arado Ar 234
The Arado Ar 234 ''Blitz'' (English: lightning) is a jet-powered bomber designed and produced by the German aircraft manufacturer Arado. It was the world's first operational turbojet-powered bomber, seeing service during the latter half of the ...
prototypes aircraft.
::109-004A-0: Pre-production engines for flight .
;109-004B: Production-series engines with reduced weight and strategic materials.
::109-004B-0: initial production standard engines, thrust at 8,700 rpm.
::109-004B-1: modified compressor and turbine to reduce vibration and thrust increased to .
::109-004B-2: Incorporating a new compressor to reduce vibration failures
::109-004B-3: A development model
::109-004B-4: Introduce air-cooled hollow turbine blades
;109-004C: A projected version with detail refinements giving thrust, not built.
;109-004D: A refined 004B with two-stage fuel injection and a new fuel control unit, ready for production by the end of World War II
World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposin ...
.
::109-004D-4: Modified combustion system for increased thrust but reduced life, for testing only.
;109-004E: An 004D with exhaust area optimised for high altitude performance, thrust with afterburning.
;109-004F: Possibly with Water or Water/Methanol injection.
;109-004G: Based on the 004C with an 11-stage compressor and 8 can combustion chambers for .
;109-004H: A re-designed and enlarged version of the 004 with 11-stage compressor and 2-stage turbine, only reaching the design stage by war's end; projected to deliver thrust at 6,600 rpm.
;Avia M-04:Post-war production of the 004B in Czechoslovakia
, rue, Чеськословеньско, , yi, טשעכאסלאוואקיי,
, common_name = Czechoslovakia
, life_span = 1918–19391945–1992
, p1 = Austria-Hungary
, image_p1 ...
;RD-10: Designation used for both captured Jumo 004s and copies, built from 1945 onward by a team at 26 GAZ, headed by Klimov and at a captured underground factory near Dessau.
Variants table
''Layout: A=axial flow compressor stages, C=can combustion chambers, T=turbine stages.''
Applications
* Arado Ar 234
The Arado Ar 234 ''Blitz'' (English: lightning) is a jet-powered bomber designed and produced by the German aircraft manufacturer Arado. It was the world's first operational turbojet-powered bomber, seeing service during the latter half of the ...
* Avia S-92
The Messerschmitt Me 262, nicknamed ''Schwalbe'' (German: "Swallow") in fighter versions, or ''Sturmvogel'' (German: "Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the Germ ...
: (Avia M-04) Czechoslovak-built Me 262 A-1a (fighter)
* Avia CS-92: (Avia M-04) Czechoslovak-built Me 262 B-1a (fighter trainer, two seats)
* Blohm & Voss P.188
* Focke-Wulf Ta 183
The Focke-Wulf Ta 183 ''Huckebein'' was a design for a jet-powered fighter aircraft intended as the successor to the Messerschmitt Me 262 and other day fighters in Luftwaffe service during World War II. It had been developed only to the exten ...
''Huckebein'' (intended for first prototypes only)
* Gotha Go 229
The Horten H.IX, RLM designation Ho 229 (or Gotha Go 229 for extensive re-design work done by Gotha to prepare the aircraft for mass production) was a German prototype fighter/bomber initially designed by Reimar and Walter Horten to be built ...
* Heinkel He 280
The Heinkel He 280 was the first turbojet-powered fighter aircraft in the world. It was inspired by Ernst Heinkel's emphasis on research into high-speed flight and built on the company's experience with the He 178 jet prototype. A combination ...
* Heinkel He 162A-8
The Heinkel He 162 ''Volksjäger'' (German, "People's Fighter") was a German single-engine, jet-powered fighter aircraft fielded by the Luftwaffe in World War II. Developed under the Emergency Fighter Program, it was designed and built quickly ...
* Henschel Hs 132
Henschel's Hs 132 was a World War II dive bomber and interceptor aircraft of the German ''Luftwaffe'' that never saw service. The unorthodox design featured a top-mounted BMW 003 jet engine (identical in terms of make and position to the powerpla ...
* Horten H.IX
The Horten H.IX, RLM designation Ho 229 (or Gotha Go 229 for extensive re-design work done by Gotha to prepare the aircraft for mass production) was a German prototype fighter/bomber initially designed by Reimar and Walter Horten to be built ...
* Junkers Ju 287
The Junkers Ju 287 was an aerodynamic testbed built in Nazi Germany to develop the technology required for a multi-engine jet bomber. It was powered by four Junkers Jumo 004 engines, featured a novel forward-swept wing, and apart from the wing ...
(first and second prototypes; intended for the fourth prototype as well as the Ju 287 A-2 and B-1 production versions)
* Lavochkin La-150
The Lavochkin La-150 (also known as the ''Izdeliye'' 150 – Aircraft or Article 150,All Lavochkin's jet aircraft were referred to in-house, and at government level, as "''Izdeliye'' 150", etc. USAF/ DOD designation Type 3), was designed by the ...
(RD-10)
* Messerschmitt Bf 110
The Messerschmitt Bf 110, often known unofficially as the Me 110,Because it was built before ''Bayerische Flugzeugwerke'' became Messerschmitt AG in July 1938, the Bf 110 was never officially given the designation Me 110. is a twin-engine (Des ...
: Flying engine test-bed.
* Messerschmitt Me 262
The Messerschmitt Me 262, nicknamed ''Schwalbe'' (German: "Swallow") in fighter versions, or ''Sturmvogel'' (German: "Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the Germa ...
* OKB-1 EF 131
The OKB-1/Junkers EF 131 was a jet bomber produced in Germany and the USSR from 1944.
Development
The EF-131 was developed based on fragments of project documentation for the Ju 287 after the Red Army captured the Junkers factory in Dessau. ...
: Equipped with the Soviet-made RD-10 copy of the Jumo 004
* Yakovlev Yak-Jumo
The Yakovlev Yak-15 (russian: Яковлев Як-15; NATO reporting name: Feather, USAF/ DOD designation Type 2) was a first-generation Soviet turbojet fighter developed by the Yakovlev design bureau (OKB) immediately after World War II. Th ...
: precursor to the Yakovlev Yak-15 powered with captured 004s
Surviving engines
A number of examples of the Jumo 004 turbojet exist in aviation museums and historical collections in North America, Europe and Australia, including;
* National Air and Space Museum
The National Air and Space Museum of the Smithsonian Institution, also called the Air and Space Museum, is a museum in Washington, D.C., in the United States.
Established in 1946 as the National Air Museum, it opened its main building on the Nat ...
(NASM) of the Smithsonian Institution
The Smithsonian Institution ( ), or simply the Smithsonian, is a group of museums and education and research centers, the largest such complex in the world, created by the U.S. government "for the increase and diffusion of knowledge". Founded ...
, Washington D.C.
)
, image_skyline =
, image_caption = Clockwise from top left: the Washington Monument and Lincoln Memorial on the National Mall, United States Capitol, Logan Circle, Jefferson Memorial, White House, Adams Morgan, Na ...
, USA; NASM is in possession of two Jumo 004s, a complete engine (on display as of 2020) and a 'cutaway' engine (not on display or is in storage as of 2020)
* National Museum of the United States Air Force
The National Museum of the United States Air Force (formerly the United States Air Force Museum) is the official museum of the United States Air Force located at Wright-Patterson Air Force Base, northeast of Dayton, Ohio. The NMUSAF is the ...
, Wright-Patterson Air Force Base
Wright-Patterson Air Force Base (WPAFB) is a United States Air Force base and census-designated place just east of Dayton, Ohio, in Greene County, Ohio, Greene and Montgomery County, Ohio, Montgomery counties. It includes both Wright and Patte ...
, Dayton, Ohio
Dayton () is the sixth-largest city in the U.S. state of Ohio and the county seat of Montgomery County. A small part of the city extends into Greene County. The 2020 U.S. census estimate put the city population at 137,644, while Greater Day ...
, USA; NMUSAF displays one detached Jumo 004, along with one of the few surviving Me 262
The Messerschmitt Me 262, nicknamed ''Schwalbe'' (German: "Swallow") in fighter versions, or ''Sturmvogel'' (German: "Storm Bird") in fighter-bomber versions, is a fighter aircraft and fighter-bomber that was designed and produced by the German ...
s (which still retains its two 004 engines)
* New England Air Museum
The New England Air Museum (NEAM) is an American aerospace museum located adjacent to Bradley International Airport in Windsor Locks, Connecticut. The museum consists of three display hangars with additional storage and restoration hangars. Its c ...
, Bradley International Airport
Bradley International Airport is a public international airport in Windsor Locks, Connecticut, United States. Owned and operated by the Connecticut Airport Authority, it is the second-largest airport in New England.
The airport is about halfw ...
, Windsor Locks, CT
Windsor Locks is a town in Hartford County, Connecticut, United States. As of the 2020 census, its population was 12,613. It is the site of Bradley International Airport, which serves the Greater Hartford-Springfield region and occupies approxim ...
, USA; NEAM displays a 'cutaway' engine on loan from the NMUSAF
The National Museum of the United States Air Force (formerly the United States Air Force Museum) is the official museum of the United States Air Force located at Wright-Patterson Air Force Base, northeast of Dayton, Ohio. The NMUSAF is the ...
* Deutsches Museum
The Deutsches Museum (''German Museum'', officially (English: ''German Museum of Masterpieces of Science and Technology'')) in Munich, Germany, is the world's largest museum of science and technology, with about 28,000 exhibited objects from ...
, Munich
Munich ( ; german: München ; bar, Minga ) is the capital and most populous city of the States of Germany, German state of Bavaria. With a population of 1,558,395 inhabitants as of 31 July 2020, it is the List of cities in Germany by popu ...
, Germany
Germany,, officially the Federal Republic of Germany, is a country in Central Europe. It is the second most populous country in Europe after Russia, and the most populous member state of the European Union. Germany is situated betwe ...
; The museum displays a Jumo 004B, built in 1944
* Australian National Aviation Museum
The Moorabbin Air Museum is an aviation museum at Moorabbin Airport in Melbourne, Victoria, Australia. It was founded in 1962 as the Australian Aircraft Restoration Group, in an attempt to maintain a World War II-era Bristol Beaufighter aircraf ...
, Moorabbin Airport
Moorabbin (Harry Hawker) Airport is a mostly general aviation airport for light aircraft located in between the southern Melbourne suburbs of Heatherton, Cheltenham, Dingley Village and Mentone. It also receives commercial airline service. T ...
, Melbourne
Melbourne ( ; Boonwurrung/Woiwurrung: ''Narrm'' or ''Naarm'') is the capital and most populous city of the Australian state of Victoria, and the second-most populous city in both Australia and Oceania. Its name generally refers to a met ...
, Victoria
Victoria most commonly refers to:
* Victoria (Australia), a state of the Commonwealth of Australia
* Victoria, British Columbia, provincial capital of British Columbia, Canada
* Victoria (mythology), Roman goddess of Victory
* Victoria, Seychelle ...
, Australia
Australia, officially the Commonwealth of Australia, is a Sovereign state, sovereign country comprising the mainland of the Australia (continent), Australian continent, the island of Tasmania, and numerous List of islands of Australia, sma ...
; ANAM displays a single detached Jumo 004
* The Flying Heritage & Combat Armor Museum
The Flying Heritage & Combat Armor Museum is a 501(c)(3) nonprofit organization dedicated to the display and preservation of rare military aircraft, tanks and other military equipment. The plan is for the museum to reopen in 2023.
On rotation in t ...
, located at Paine Field
Paine Field , also known as Snohomish County Airport, is a commercial and general aviation airport serving the Seattle metropolitan area in the U.S. state of Washington. It is located in unincorporated Snohomish County, Washington, between the ...
in Everett, Washington
Everett is the county seat and largest city of Snohomish County, Washington, United States. It is north of Seattle and is one of the main cities in the metropolitan area and the Puget Sound region. Everett is the seventh-largest city in the ...
is currently restoring an Me 262 and her accompanying Jumo 004 engines to airworthy condition. The 004s have been re-tooled to allow for greater fatigue resistance and, therefore, a longer overall engine life. As of October 2019, the restored 262 has successfully performed taxiway testing under the power of her 004 engines[https://www.facebook.com/watch/?v=2312086125580004 ]
* The South African Air Force Museum, located at Ysterplaat, Cape Town. Partly sectioned Jumo 004
Specifications (Jumo 004B)
See also
References
Notes
Bibliography
*
*
*
*
*
*
*
External links
"Design Analysis of Messerschmitt Me-262 Jet Fighter Part II—The Power Plant"
First Attempt of the 21st Century to Start an Me 262A's Restored Jumo 004B jet engine with its Riedel 2-stroke APU Unit
{{RLM jet/rocket designations
1940s turbojet engines
Junkers aircraft engines
Messerschmitt Me 262