HOME

TheInfoList



OR:

JST connectors are
electrical connector Components of an electrical circuit are electrically connected if an electric current can run between them through an electrical conductor. An electrical connector is an electromechanical device used to create an electrical connection between ...
s manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.List of JST connector series; JST.
/ref> JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for
rechargeable battery A rechargeable battery, storage battery, or secondary cell (formally a type of Accumulator (energy), energy accumulator), is a type of electrical battery which can be charged, discharged into a load, and recharged many times, as opposed to ...
packs, battery balancers,
battery eliminator circuit In battery-powered equipment, a battery eliminator circuit (BEC) is an electronic voltage regulator used to power a subsystem at a different voltage without the need for a supplemental battery. BECs are commonly used in radio-controlled models, whi ...
s,
3D printer 3D printing or additive manufacturing is the Manufacturing, construction of a three-dimensional object from a computer-aided design, CAD model or a digital 3D modeling, 3D model. It can be done in a variety of processes in which material is ...
s, and radio controlled servos. The term "JST" is sometimes incorrectly used as a vernacular term meaning any small white electrical connector mounted on
PCB PCB may refer to: Science and technology * Polychlorinated biphenyl, an organic chlorine compound, now recognized as an environmental toxin and classified as a persistent organic pollutant * Printed circuit board, a board used in electronics * ...
s.


Connector series

JST manufactures a large number of series (families) of connectors. The PCB (wire-to-board) connectors are available in top (vertical) or side (horizontal) entry, and through-hole or surface-mount.


Connector soldering

A majority of JST through-hole headers can't withstand the temperatures required for
reflow soldering Reflow soldering is a process in which a solder paste (a sticky mixture of powdered solder and flux) is used to temporarily attach one or thousands of tiny electrical components to their contact pads, after which the entire assembly is subject ...
, because the plastic has a lower melting point since they were designed for
wave soldering Wave soldering is a bulk soldering process used for the manufacturing of printed circuit boards. The circuit board is passed over a pan of molten solder in which a pump produces an upwelling of solder that looks like a standing wave. As the ci ...
methods. Some JST surface-mount headers are designed to handle higher temperatures of reflow soldering.


Connector confusion on the internet

End-users and 3rd-party sellers on
eBay eBay Inc. ( ) is an American multinational e-commerce company based in San Jose, California, that facilitates consumer-to-consumer and business-to-consumer sales through its website. eBay was founded by Pierre Omidyar in 1995 and became a ...
often describe connectors by their wrong name thus perpetuating confusion of the exact series of a specific connector. It is very common in blogs and websites to incorrectly name a specific connector only by the name of the manufacturer. To minimize confusion, it is best to describe a connector using: the manufacturer's name, exact connector series, and optionally the pitch, such as "JST-XH" or "JST-XH-2.50mm" or "2.50mm JST XH-series" or other variations. The official J.S.T. Co. website has a tool which allows users to check certain models for their authenticity and specifications. Note: Some 2.50 mm parts are incorrectly sold on the internet as , and the 1.25 mm parts as .


Gallery

File:JSTS-02-X-02PI-RA.jpg, JST PH 2-pin right-angle through-hole PCB. File:JSTS-02-X-02PI-RS.jpg, JST PH 2-pin right-angle surface-mount PCB. File:JST RCY.JPG, JST RCY 2-pin.


See also

*
DC connector A DC connector (or DC plug, for one common type of connector) is an electrical connector for supplying direct current (DC) power. Compared to domestic AC power plugs and sockets, DC connectors have many more standard types that are not interchan ...
*
Electrical connector Components of an electrical circuit are electrically connected if an electric current can run between them through an electrical conductor. An electrical connector is an electromechanical device used to create an electrical connection between ...
* Pin header connector


References


External links

*
top-level websites for 12 countries
such a
America
an
UK
*
List of all connector series, sorted by alphabetical
*
Wire-to-Board crimp connector series, sorted by pitch
*
Wire-to-Board IDC connector series, sorted by pitch
{{Authority control Companies based in Osaka Prefecture Electrical signal connectors