HOME

TheInfoList



Click Here for Items Related To - JIS Semiconductor Designation
OR:
JIS Semiconductor Designation on:   [Wikipedia]   [Google]   [Amazon]

Japanese Industrial Standards are the standards used for industrial activities in Japan, coordinated by the Japanese Industrial Standards Committee (JISC) and published by the Japanese Standards Association (JSA). The JISC is composed of many nationwide committees and plays ...
(JIS) has standard JIS-C-7012 for semiconductor part numbers. The first digit denotes the ''p-n junction count'' ("3" may also denote a dual-gate FET); then follows the letter "S", then: Then follows the ''
Japan Electronics and Information Technology Industries Association The is a Japanese trade organization for the electronics and IT industries. It was formed in 2000 from two earlier organizations, the Electronic Industries Association of Japan and the Japan Electronic Industries Development Association. Histor ...
's Electronic DEvice REgistration Center'' (JEITA-EDEREC)-assigned part number, optionally followed by suffixes (such as "A", "B", "C", or "R", "O", "BL", standing for "Red", "Orange", "Blue" etc.) to denote variants, such as tighter hFE (gain) groupings. Example: 2SD965, but sometimes the "2S" prefix is not marked on the package – a 2SD965 might only be marked "D965"; a 2SC1815 might be listed by a supplier as simply "C1815", thus possibly creating confusion with
Pro Electron Pro Electron or EECA is the European type designation and registration system for active components (such as semiconductors, liquid crystal displays, sensor devices, electronic tubes and cathode ray tubes). Pro Electron was set up in 1966 in Bru ...
abbreviated markings, because a transistor marked "D965" might either be a 2SD965 or a BD965.


References


See also

*
JEDEC The JEDEC Solid State Technology Association is an independent semiconductor engineering trade organization and standardization body headquartered in Arlington County, Virginia, United States. JEDEC has over 300 members, including some of the w ...
*
Pro Electron Pro Electron or EECA is the European type designation and registration system for active components (such as semiconductors, liquid crystal displays, sensor devices, electronic tubes and cathode ray tubes). Pro Electron was set up in 1966 in Bru ...
*
Mullard–Philips tube designation In Europe, the principal method of numbering vacuum tubes ("thermionic valves") was the nomenclature used by the Philips company and its subsidiaries Mullard in the UK, Valvo( de,  it) in Germany, Radiotechnique (''Miniwatt-Dario'' b ...
*
RMA tube designation In the years 1942-1944, the Radio Manufacturers Association used a descriptive nomenclature system for industrial, transmitting, and special-purpose vacuum tubes. The numbering scheme was distinct from both the numbering schemes used for standard r ...
*
RETMA tube designation The Radio Electronics Television Manufacturers' Association was formed in 1953, as a result of mergers with other trade standards organisations, such as the RMA. It was principally responsible for the standardised nomenclature for American vacuum t ...
*
Russian tube designations Vacuum tubes produced in the former Soviet Union and in present-day Russia carry their own unique designations. Some confusion has been created in "translating" these designations, as they use Cyrillic rather than Latin characters. 1929 system T ...
{{Portal, Electronics Electrical components Electrical standards Electronics lists JIS standards