In geology, interbedding occurs when

beds A bed is an item of furniture that is used as a place to sleep, rest, and relax. Most modern beds consist of a soft, cushioned mattress on a bed frame. The mattress rests either on a solid base, often wood slats, or a sprung base. Many bed ...

(layers of rock) of a particular

lithology The lithology of a rock unit is a description of its physical characteristics visible at outcrop, in hand or core samples, or with low magnification microscopy. Physical characteristics include colour, texture, grain size, and composition. Lit ...

lie between or alternate with beds of a different lithology. For example, sedimentary rocks may be interbedded if there were sea level variations in their

sedimentary depositional environment In geology, depositional environment or sedimentary environment describes the combination of physical, chemical, and biological processes associated with the deposition of a particular type of sediment and, therefore, the rock types that will be ...

. Intercalation is a special case of interbedding where a layer is variably inserted into an already existing sequence; or where two separate

depositional environments In geology, depositional environment or sedimentary environment describes the combination of physical, chemical, and biological processes associated with the deposition of a particular type of sediment and, therefore, the rock types that will b ...

in close spatial proximity migrate alternately across the contact. Loughshinny folds

While interbedding has layers that are horizontally flat (or aligned with the angle of the entire stratum), intercalated rock on the other hand has slanted layers that streak through each other (even when it aligns with the stratum). For example intercalated conglomerate and sandstone looks like ripples of different material networked through each other somewhat off the horizontal, as the beds are deposited in a gradient. This is likely due to differing fluvial conditions and gradual changes in

sediment transport Sediment transport is the movement of solid particles (sediment), typically due to a combination of gravity acting on the sediment, and/or the movement of the fluid in which the sediment is entrained. Sediment transport occurs in natural systems ...

over time.

Features

Typical alternation sequences include sequences of

marl Marl is an earthy material rich in carbonate minerals, clays, and silt. When hardened into rock, this becomes marlstone. It is formed in marine or freshwater environments, often through the activities of algae. Marl makes up the lower part o ...

and limestone. In its most conspicuous form, such an interbedding as seen on a quarry wall can look like the stripes of a zebra: a dark gray marl layer, for example twenty centimeters thick, is followed by a half-meter-thick light limestone bench, which in turn is overlaid by a marl layer and this again by limestone and so on. Such evenly banded layers can consist of hundreds of alternating layers and can be several hundred meters thick. Interbedding often reflects a cyclical change in sedimentation conditions. Lime-marl interbeddings represent the cyclical detachment of a high carbonate production due to the stronger influence of the terrestrial background sedimentation, which is usually attributed sedimentologically to an increase in sea depth and distance from the coast at the time of deposition at the corresponding deposit location. But these can cause alternations by recurring special events, such as the deposition of coarse turbidity current sediments on what would be otherwise be a quiet and continuously running background sedimentation. For example, a river that sees regular interrupts in the form of flash floods.

References

{{petrology-stub Petrology Stratigraphy Sedimentology