IvanAnywhere evolution
Ivan Bowman has been a software developer at Sybase/iAnywhere/SAP since 1993, and now is an Engineering Director at SAP Canada. In 2002 his wife received a job in Halifax approximately from his place of work inProof of concept
In November 2006, iAnywhere programmer Ian McHardy and Director of Engineering Glenn Paulley (Ivan’s immediate manager) conceived the idea of IvanAnywhere after Glenn saw a television commercial for a remote controlled toy blimp. In January 2007, after considering different possible designs and getting through a number of deadlines related to iAnywhere releases, Ian started working on a proof-of-concept: a tablet computer and webcam mounted on a radio-controlled toy truck. In February 2007, even though the truck was challenging to drive and the webcam was only a few inches above the floor, Ivan was able to successfully drive the proof-of-concept from Halifax.Full version
In May 2007, Ivan started using Ian's full version daily. The full version of IvanAnywhere consists of a wheeled base with 24-volt SuperDroid Robots motors. The motor and wheel assemblies support "tank drive" so that Ivan can negotiate through doorways and meeting rooms more easily. Above the motors sits a box filled with wires, various electronics, and batteries which power the robot for a full work day. The entire robot weighs approximately 40 kg. A 1.5 meter (5 foot) aluminum bar supports a webcam with a gray foam ball mounted above it. The robot is equipped with a webcam, speakers, microphone, and a tablet computer with a live feed from Bowman's webcam to help coworkers to communicate with him more naturally. Infrared proximity sensors keep the robot from bumping into walls and cubicles. The tablet PC mounted on IvanAnywhere runs a SQL Anywhere database server. One of the tasks of the SQL Anywhere database is to retain monitoring statistics on a wide variety of controls and sensors on the robot. This is so that Ian can monitor how far the robot travels in any particular period, how many times the proximity sensors have halted the robot's motion, the robot's network connectivity uptime, and other related statistics. Ivan "drives" the robot from his home office in Halifax using a two-joystick PC gaming console. One joystick controls the webcam, the other the robot's drive system. In October 2007, a digital camera was mounted on the bar so that Ivan could take high-resolution pictures of whiteboards, presentation slides, and overheads, or just look out the window. The robot needs to be recharged at the end of every work day. Until recently, this required a Waterloo co-worker to plug it in before leaving for the night. In May 2008, Ian constructed a charging bay out of lumber that Ivan "drives" into - copper bars attached to the robot connect to copper springs on the charging unit which are directly connected to the battery charger and enabled through a relay circuit so that the charging bars are not live unless the robot is in the bay. The charging bay permits Ivan to recharge the robot at his convenience, and without assistance. IvanAnywhere is very popular with other people in the building and the SAP Engineering floor has become a regular stop on visitor tours of the SAP building.Challenges of Being a Robot
Although most of Bowman's colleagues treat IvanAnywhere as one of their own, people who aren't used to the robot are sometimes uncomfortable talking to it instead of a human being.See also
* Computer-supported collaboration * HomeshoringReferences
Bibliography
External links