International Harvester Metro Van

The International Metro Van, made by International Harvester, is a step van, also known as walk-in or multi-stop delivery truck. This vehicle type was one of the earlier, mass-produced forward control vehicles, once commonly used for milk or bakery delivery, as well as ambulance services, mobile offices, and radio transmitter vans. Typically, they were 1/2-, 3/4-, or 1-ton panel trucks that allowed the driver to stand or sit while driving the vehicle.

Variations included a passenger bus called a Metro Coach, a Metro partial cab-chassis with front-end sections (for end-user customization), and a cab-over truck called a "walk-in cab". The truck (also called a chassis cab) variation could be configured with a separate box or container for cargo transport or left open to be fitted with other equipment such as a compactor for a garbage truck or a stake bed.

History

The International Harvester Metro Van was produced in the United States from 1938 until 1975 and sold internationally. The drive train was originally based on the 1937-40 D-Series trucks. One of the first models built was sold to the Czechoslovakian Army and destroyed by the German army during World War II.

Unlike their trucks and other vehicles, the Metro bodies were built by the Metropolitan Body Company on Grand Street in Bridgeport, Connecticut, a company that International Harvester would later purchase in 1948. Final assembly was then done in one of the IH manufacturing plants. The original design was by Raymond Loewy of Studebaker and Coke bottle fame. The Metro design was one of several with which Loewy was involved or created during his association with International Harvester.

The overall design of the Metro vans remained somewhat unchanged from 1938 until 1964 when it was redesigned by the in-house design team in the Chicago Metro plant to be competitive with the Boyertown and Hackney vans. The corners were squared and an opening hood was added for easier access to coolant and oil dipstick. An eight-cylinder engine was also made available.

In the 1950s, International Harvester began producing variations such as the "Metro-Lite," and "Metro-Multi-Stop" vans. In 1959, the "Metro Mite" was introduced. It was based on the Scout drive train. In 1960 the "Bookmobile" was built by the Metropolitan Body Company on an IHC chassis.http://www.coachbuilt.com/bui/m/metropolitan/metropolitan.htm By 1972, all IHC Metro Vans were stripped-chassis that other manufacturers could build on. After 1975 they were discontinued along with all other light-duty trucks except for the Scout, which was last made in 1980.

The Metro Van was re-issued by Navistar in 2000, as a medium-sized delivery truck. Other than by model name, it is unrelated to the original Metro line.

In 2005, Navistar purchased the Workhorse Group, a manufacturer of step-van and motor home chassis, to seemingly re-enter the delivery van market. For a short time Workhorse offered an integrated chassis-body product, similar in nature to the original International Harvester van, called the MetroStar. In September 2012, Navistar announced the discontinuation of Workhorse and the closure of the plant in Union City, Indiana.

Metropolitan Body Company

With the introduction of the Metro Van body in 1937, a new manufacturing facility opened at 151 Kossuth Street in Bridgeport, Connecticut. All Metro Van bodies through its closing in the early 1970s were built in the Kossuth Street facility. Metro Van bodies were sold for all major truck builder platforms until 1947, when it started producing exclusively for International Harvester as it switched back to commercial production from building gun turrets and bomb blast shields for the war effort. MBC became a wholly owned subsidiary of International Harvester in January, 1948.

During the late 1930s MBC were pioneers in the development of cab over engine (COE) route delivery bodies. MBC had an extensive patent protected line of utility cabs, beds, and bodies with unique functional aspects that likely contributed to International Harvester Company's position as an innovator and market leader in the commercial truck industry in the latter half of the 20th century.

Original Loewy design distinction

The initial model of the Metro series was the version that adhered closest to the original Loewy design. Known as the "D" or "D-M" series these vans had several unique features that were later dropped for as yet unknown reasons. Some of these features included teardrop shaped headlights (similar to those found on 1937 & '38 Ford coupes and sedans), rear fender skirts (coverings) with deco styled "Metro" badges, "triple diamond" IHC grill emblem, and a more streamlined front end configuration lacking the more angular design of later Metros. This original road vehicle design is sometimes referred as the "giant scarab" which is consistent with the Egyptian influences of the Art Deco movement. A review of Loewy's other designs for items such as streamlined locomotives shows his interest in wind-cheating "swept back" contours.

File:1941 D15M 3.jpg, Driver side view
File:1941 D15M 17.jpg, Front end with grill, emblem, and teardrop headlights
File:1941 D15M 19.jpg, Triple diamond front emblem
File:1941 D15M 20.jpg, Rear wheel side skirt with Art-Deco style emblem unique to this series

Model Series

The powertrain of the Metro vans was typically based on an equivalent series International light- or medium-duty truck. For example, an LM-120 1/2 ton Metro van (5,400 lb weight capacity or GVWR) with a 7 3/4 or 9 1/2 foot body effectively had the IH engine (SD-220), transmission, rearend, wheels (although with varying bolt patterns), and braking system of an L-120 pickup truck. With the introduction of each new series of truck, updated Metro vans were included as part of their commercial line.

Metro model designations can be difficult to decode considering that the differently configured vehicles could have the same model number. For example, in reference to the LM-120 mentioned previously it was available in several different wheelbase and body lengths yet its GVWR (5,400 lbs) remained the same. Each series has unique models and configurations that may have common features or functions across the series.

Model numbers were typically coded into the VIN number along with the chassis serial number (a.k.a. "build number", its position in the production sequence) and any other special identifying code(s).

The suffix number (i.e. "120" of "LM-120") would typically refer to the weight class (GVWR) of the vehicle. As the suffix number increased, so did the designated carrying capacity. In some instances, this number was also used to designate the weight capacity along of a certain model vehicle with particular features or functions.

Gallery

File:BurhopsNorthStateStreetPhoto (cropped).jpg, 1950 LM-series Metro Van
File:1957MetroVan.JPG, Unrestored 1957 S-series Metro van, 7 1/2 ft body (shorty)
File:MetroCoach.JPG, Original 1960-62 A series Metro Coach (bus)
File:2Metro.JPG, Unrestored (left) 1961 A-series Walk-in Cab truck, (right) 1957 S-series van

See also

*International Harvester
*Multi-stop truck
*List of International Harvester vehicles

Notes

References

Further reading

*
*

External links

Old IHC, non-profit membership forum for vintage IHC enthusiastsBinder Planet, membership forum for vintage IHC enthusiastsWisconsin Historical Society - IH Archives

{{International Harvester historic timeline

Cab over vehicles
Metro Van
Vans
Vehicles introduced in 1938
Streamliner cars