![Scan-to-BIM Mechanical Room](https://upload.wikimedia.org/wikipedia/commons/2/23/Scan-to-BIM_Mechanical_Room.jpg)
Building information modeling (BIM) is a process supported by various tools, technologies and contracts involving the generation and management of digital representations of physical and functional characteristics of places. Building information models (BIMs) are
computer files
A computer file is a computer resource for recording data in a computer storage device, primarily identified by its file name. Just as words can be written to paper, so can data be written to a computer file. Files can be shared with and transf ...
(often but not always in proprietary formats and containing proprietary data) which can be extracted, exchanged or networked to support decision-making regarding a built asset. BIM software is used by individuals, businesses and government agencies who plan,
design
A design is a plan or specification for the construction of an object or system or for the implementation of an activity or process or the result of that plan or specification in the form of a prototype, product, or process. The verb ''to design' ...
,
construct, operate and maintain buildings and diverse
physical infrastructures, such as water, refuse, electricity, gas, communication utilities, roads, railways, bridges, ports and tunnels.
The concept of BIM has been in development since the 1970s, but it only became an agreed term in the early 2000s. Development of standards and adoption of BIM has progressed at different speeds in different countries; standards developed in the
United Kingdom
The United Kingdom of Great Britain and Northern Ireland, commonly known as the United Kingdom (UK) or Britain, is a country in Europe, off the north-western coast of the European mainland, continental mainland. It comprises England, Scotlan ...
from 2007 onwards have formed the basis of international standard ISO 19650, launched in January 2019.
History
The concept of BIM has existed since the 1970s. The first software tools developed for modeling buildings emerged in the late 1970s and early 1980s, and included workstation products such as
Chuck Eastman's Building Description System
and GLIDE,
RUCAPS,
Sonata,
Reflex and
Gable 4D Series.
The early applications, and the hardware needed to run them, were expensive, which limited widespread adoption.
![Jonathan Ingram 2021](https://upload.wikimedia.org/wikipedia/commons/0/00/Jonathan_Ingram_2021.jpg)
The pioneering role of applications such as RUCAPS, Sonata and Reflex has been recognized by Laiserin as well as the UK's
Royal Academy of Engineering;
former GMW employee
Jonathan Ingram
Jonathan Ingram (born 23 June 1961 in Kiribati) is a British inventor, businessman and author. He is particularly associated with development of early building information modelling (BIM) applications, including Sonata, Reflex and ProRefle ...
worked on all three products.
[ What became known as BIM products differed from architectural drafting tools such as ]AutoCAD
AutoCAD is a commercial computer-aided design (CAD) and drafting software application. Developed and marketed by Autodesk, AutoCAD was first released in December 1982 as a desktop app running on microcomputers with internal graphics controllers. ...
by allowing the addition of further information (time, cost, manufacturers' details, sustainability, and maintenance information, etc.) to the building model.
As Graphisoft had been developing such solutions for longer than its competitors, Laiserin regarded its ArchiCAD application as then "one of the most mature BIM solutions on the market." Following its launch in 1987, ArchiCAD became regarded by some as the first implementation of BIM
''Bim'' is a 1974 Trinidad and Tobago film written by Raoul Pantin and directed by Hugh A. Robertson. It was described by Bruce Paddington as "one of the most important films to be produced in Trinidad and Tobago and... one of the classics of Ca ...
,[Lincoln H. Forbes, Syed M. Ahmed, (2010) ''Modern Construction: Lean Project Delivery and Integrated Practices'', CRC Press.] as it was the first CAD
Computer-aided design (CAD) is the use of computers (or ) to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve co ...
product on a personal computer able to create both 2D and 3D geometry, as well as the first commercial BIM product for personal computers. However, ArchiCAD founder Gábor Bojár has acknowledged to Jonathan Ingram in an open letter, that Sonata "was more advanced in 1986 than ArchiCAD at that time", adding that it "surpassed already the matured definition of 'BIM' specified only about one and a half decade later".[In Appendix 6: Letter to the author, p. 281, .]
The term 'building model' (in the sense of BIM as used today) was first used in papers in the mid-1980s: in a 1985 paper by Simon Ruffle eventually published in 1986, and later in a 1986 paper by Robert Aish – then at GMW Computers Ltd, developer of RUCAPS software – referring to the software's use at London's Heathrow Airport. The term 'Building Information Model' first appeared in a 1992 paper by G.A. van Nederveen and F. P. Tolman.
However, the terms 'Building Information Model' and 'Building Information Modeling' (including the acronym "BIM") did not become popularly used until some 10 years later. Facilitating exchange and interoperability of information in digital format was variously with differing terminology: by Graphisoft
Graphisoft SE is a Hungarian design software company headquartered in Budapest, Hungary. As a subsidiary of Nemetschek, Graphisoft develops Building Information Modeling software products for architects, interior designers and planners. Graphis ...
as "Virtual Building" or "Single Building Model", Bentley Systems
Bentley Systems, Incorporated is an American-based software development company that develops, manufactures, licenses, sells and supports computer software and services for the design, construction, and operation of infrastructure. The company' ...
as "Integrated Project Models", and by Autodesk
Autodesk, Inc. is an American multinational software corporation that makes software products and services for the architecture, engineering, construction, manufacturing, media, education, and entertainment industries. Autodesk is headquartere ...
or Vectorworks
Vectorworks, Inc. is a U.S.-based software development company that focuses on CAD and BIM software for the architecture, engineering, and construction (AEC), landscape, and entertainment industries. Vectorworks is owned by the Nemetschek Grou ...
as "Building Information Modeling". In 2002, Autodesk released a white paper
A white paper is a report or guide that informs readers concisely about a complex issue and presents the issuing body's philosophy on the matter. It is meant to help readers understand an issue, solve a problem, or make a decision. A white pape ...
entitled "Building Information Modeling," and other software vendors also started to assert their involvement in the field. By hosting contributions from Autodesk, Bentley Systems and Graphisoft, plus other industry observers, in 2003, Jerry Laiserin helped popularize and standardize the term as a common name for the digital representation of the building process.
Interoperability and BIM standards
As some BIM software developers have created proprietary data structures in their software, data and files created by one vendor's applications may not work in other vendor solutions. To achieve interoperability
Interoperability is a characteristic of a product or system to work with other products or systems. While the term was initially defined for information technology or systems engineering services to allow for information exchange, a broader defi ...
between applications, neutral, non-proprietary or open standards for sharing BIM data among different software applications have been developed.
Poor software interoperability has long been regarded as an obstacle to industry efficiency in general and to BIM adoption in particular. In August 2004 a US National Institute of Standards and Technology ( NIST) report conservatively estimated that $15.8 billion was lost annually by the U.S. capital facilities industry due to inadequate interoperability arising from "the highly fragmented nature of the industry, the industry’s continued paper-based business practices, a lack of standardization, and inconsistent technology adoption among stakeholders".
An early BIM standard was the CIMSteel Integration Standard, CIS/2, a product model and data exchange file format for structural steel project information (CIMsteel: Computer Integrated Manufacturing of Constructional Steelwork). CIS/2 enables seamless and integrated information exchange during the design and construction of steel framed structures. It was developed by the University of Leeds
, mottoeng = And knowledge will be increased
, established = 1831 – Leeds School of Medicine1874 – Yorkshire College of Science1884 - Yorkshire College1887 – affiliated to the federal Victoria University1904 – University of Leeds
, ...
and the UK's Steel Construction Institute in the late 1990s, with inputs from Georgia Tech
The Georgia Institute of Technology, commonly referred to as Georgia Tech or, in the state of Georgia, as Tech or The Institute, is a public research university and institute of technology in Atlanta, Georgia. Established in 1885, it is part of ...
, and was approved by the American Institute of Steel Construction as its data exchange format for structural steel in 2000.
BIM is often associated with Industry Foundation Classes
The Industry Foundation Classes (IFC) is a CAD data exchange data schema intended for description of architectural, building and construction industry data.
It is a platform-neutral, open data schema specification that is not controlled by a singl ...
(IFCs) and aecXML {{lowercase, title=aecXML
aecXML (architecture, engineering and construction extensible markup language) is a specific XML markup language which uses Industry Foundation Classes to create a vendor-neutral means to access data generated by building ...
– data structures for representing information – developed by buildingSMART
buildingSMART, formerly the International Alliance for Interoperability (IAI), is an international organisation which aims to improve the exchange of information between software applications used in the construction industry. It has developed Indu ...
. IFC is recognised by the ISO
ISO is the most common abbreviation for the International Organization for Standardization.
ISO or Iso may also refer to: Business and finance
* Iso (supermarket), a chain of Danish supermarkets incorporated into the SuperBest chain in 2007
* Iso ...
and has been an official international standard, ISO 16739, since 2013.
Construction Operations Building information exchange ( COBie) is also associated with BIM. COBie was devised by Bill East of the in 2007, and helps capture and record equipment lists, product data sheets, warranties, spare parts lists, and preventive maintenance schedules. This information is used to support operations, maintenance and asset management once a built asset is in service. In December 2011, it was approved by the US-based National Institute of Building Sciences
The National Institute of Building Sciences is a non-profit, non-governmental organization that brings together representatives of government, the professions, industry, labor and consumer interests, and regulatory agencies to focus on the identif ...
as part of its National Building Information Model (NBIMS-US) standard. COBie has been incorporated into software, and may take several forms including spreadsheet, IFC, and ifcXML. In early 2013 BuildingSMART
buildingSMART, formerly the International Alliance for Interoperability (IAI), is an international organisation which aims to improve the exchange of information between software applications used in the construction industry. It has developed Indu ...
was working on a lightweight XML format, COBieLite, which became available for review in April 2013. In September 2014, a code of practice regarding COBie was issued as a British Standard: BS 1192-4.
In January 2019, ISO published the first two parts of ISO 19650, providing a framework for building information modelling, based on process standards developed in the United Kingdom. UK BS and PAS 1192 specifications form the basis of further parts of the ISO 19650 series, with parts on asset management (Part 3) and security management (Part 5) published in 2020.
The IEC/ISO 81346 series for reference designation has published 81346-12:2018, also known as RDS-CW (Reference Designation System for Construction Works). The use of RDS-CW offers the prospect of integrating BIM with complementary international standards based classification systems being developed for the Power Plant sector.
Definition
ISO 19650-1:2018 defines BIM as:
:''Use of a shared digital representation of a built asset to facilitate design, construction and operation processes to form a reliable basis for decisions.''
The US National Building Information Model Standard Project Committee has the following definition:
:''Building Information Modeling (BIM) is a digital representation of physical and functional characteristics of a facility. A BIM is a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle; defined as existing from earliest conception to demolition.''
Traditional building design was largely reliant upon two-dimensional technical drawings
Technical drawing, drafting or drawing, is the act and discipline of composing drawings that visually communicate how something functions or is constructed.
Technical drawing is essential for communicating ideas in industry and engineering.
...
(plans, elevations, sections, etc.). Building information modeling extends the three primary spatial dimensions (width, height and depth), incorporating information about time (so-called 4D BIM), cost (5D BIM), asset management, sustainability, etc. BIM therefore covers more than just geometry. It also covers spatial relationships, geospatial information, quantities and properties of building components (for example, manufacturers' details), and enables a wide range of collaborative processes relating to the built asset from initial planning through to construction and then throughout its operational life.
BIM authoring tools present a design as combinations of "objects" – vague and undefined, generic or product-specific, solid shapes or void-space oriented (like the shape of a room), that carry their geometry, relations, and attributes. BIM applications allow extraction of different views from a building model for drawing production and other uses. These different views are automatically consistent, being based on a single definition of each object instance. BIM software also defines objects parametrically; that is, the objects are defined as parameters and relations to other objects so that if a related object is amended, dependent ones will automatically also change. Each model element can carry attributes for selecting and ordering them automatically, providing cost estimates as well as material tracking and ordering.
For the professionals involved in a project, BIM enables a virtual information model to be shared by the design team (architect
An architect is a person who plans, designs and oversees the construction of buildings. To practice architecture means to provide services in connection with the design of buildings and the space within the site surrounding the buildings that h ...
s, landscape architects, surveyors, civil
Civil may refer to:
*Civic virtue, or civility
*Civil action, or lawsuit
* Civil affairs
*Civil and political rights
*Civil disobedience
*Civil engineering
*Civil (journalism), a platform for independent journalism
*Civilian, someone not a membe ...
, structural
A structure is an arrangement and organization of interrelated elements in a material object or system, or the object or system so organized. Material structures include man-made objects such as buildings and machines and natural objects such ...
and building services engineer
Engineers, as practitioners of engineering, are professionals who invent, design, analyze, build and test machines, complex systems, structures, gadgets and materials to fulfill functional objectives and requirements while considering the limit ...
s, etc.), the main contractor
A general contractor, main contractor or prime contractor is responsible for the day-to-day oversight of a construction site, management of vendors and trades, and the communication of information to all involved parties throughout the course of ...
and subcontractor
A subcontractor is an individual or (in many cases) a business that signs a contract to perform part or all of the obligations of another's contract.
Put simply the role of a subcontractor is to execute the job they are hired by the contractor f ...
s, and the owner/operator. Each professional adds discipline-specific data to the shared model – commonly, a 'federated' model which combines several different disciplines' models into one. Combining models enables visualisation of all models in a single environment, better coordination and development of designs, enhanced clash avoidance and detection, and improved time and cost decision-making.
BIM wash
"BIM wash" or "BIM washing" is a term sometimes used to describe inflated, and/or deceptive, claims of using or delivering BIM services or products. Also termed, "faking the BIM."
Usage throughout the project life-cycle
Use of BIM goes beyond the planning and design phase of the project, extending throughout the building life cycle. The supporting processes of building lifecycle management
Building lifecycle management or BLM is the adaptation of product lifecycle management (PLM)-like techniques to the design, construction, and management of buildings. Building lifecycle management requires accurate and extensive building informati ...
include cost management
Cost accounting is defined as "a systematic set of procedures for recording and reporting measurements of the cost of manufacturing goods and performing services in the aggregate and in detail. It includes methods for recognizing, classifying, al ...
, construction management, project management
Project management is the process of leading the work of a team to achieve all project goals within the given constraints. This information is usually described in project documentation, created at the beginning of the development process. T ...
, facility operation and application in green building
Green building (also known as green construction or sustainable building) refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planni ...
.
A 'Common Data Environment' (CDE) is defined in ISO 19650 as an:
:''Agreed source of information for any given project or asset, for collecting, managing and disseminating each information container through a managed process.''
A CDE workflow describes the processes to be used while a CDE solution can provide the underlying technologies. A CDE is used to share data across a project or asset lifecycle, supporting collaboration across a whole project team (the meaning overlaps with enterprise content management, ECM, but with a greater focus on BIM issues).
Management of building information models
Building information models span the whole concept-to-occupation time-span. To ensure efficient management of information processes throughout this span, a BIM manager might be appointed. The BIM manager is retained by a design build team on the client's behalf from the pre-design phase onwards to develop and to track the object-oriented BIM against predicted and measured performance objectives, supporting multi-disciplinary building information models that drive analysis, schedules, take-off and logistics. Companies are also now considering developing BIMs in various levels of detail, since depending on the application of BIM, more or less detail is needed, and there is varying modeling effort associated with generating building information models at different levels of detail.
BIM in construction management
Participants in the building process are constantly challenged to deliver successful projects despite tight budgets, limited staffing, accelerated schedules, and limited or conflicting information. The significant disciplines such as architectural, structural
A structure is an arrangement and organization of interrelated elements in a material object or system, or the object or system so organized. Material structures include man-made objects such as buildings and machines and natural objects such ...
and MEP designs should be well-coordinated, as two things can't take place at the same place and time. BIM additionally is able to aid in collision detection, identifying the exact location of discrepancies.
The BIM concept envisages virtual construction of a facility prior to its actual physical construction, in order to reduce uncertainty, improve safety, work out problems, and simulate and analyze potential impacts. Sub-contractors from every trade can input critical information into the model before beginning construction, with opportunities to pre-fabricate or pre-assemble some systems off-site. Waste can be minimised on-site and products delivered on a just-in-time basis rather than being stock-piled on-site.
Quantities and shared properties of materials can be extracted easily. Scopes of work can be isolated and defined. Systems, assemblies and sequences can be shown in a relative scale with the entire facility or group of facilities. BIM also prevents errors by enabling conflict or 'clash detection' whereby the computer model visually highlights to the team where parts of the building (e.g.:structural frame and building services pipes or ducts) may wrongly intersect.
BIM in facility operation
BIM can bridge the information loss associated with handling a project from design team, to construction team and to building owner/operator, by allowing each group to add to and reference back to all information they acquire during their period of contribution to the BIM model. This can yield benefits to the facility owner or operator.
For example, a building owner may find evidence of a leak in his building. Rather than exploring the physical building, he may turn to the model and see that a water valve
A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fitting ...
is located in the suspect location. He could also have in the model the specific valve size, manufacturer, part number, and any other information ever researched in the past, pending adequate computing power. Such problems were initially addressed by Leite and Akinci when developing a vulnerability representation of facility contents and threats for supporting the identification of vulnerabilities in building emergencies.
Dynamic information about the building, such as sensor measurements and control signals from the building systems, can also be incorporated within BIM software to support analysis of building operation and maintenance.
There have been attempts at creating information models for older, pre-existing facilities. Approaches include referencing key metrics such as the Facility Condition Index
The facility condition index (FCI) is used in facilities management to provide a benchmark to compare the relative condition of a group of facilities. The FCI is primarily used to support asset management initiatives of federal, state, and local ...
(FCI), or using 3D laser-scanning surveys and photogrammetry techniques (separately or in combination) or digitizing traditional building surveying methodologies by using mobile technology to capture accurate measurements and operation-related information about the asset that can be used as the basis for a model. Trying to model a building constructed in, say 1927, requires numerous assumptions about design standards, building codes, construction methods, materials, etc., and is, therefore, more complex than building a model during design.
One of the challenges to the proper maintenance and management of existing facilities is understanding how BIM can be utilized to support a holistic understanding and implementation of building management practices and "cost of ownership
Total cost of ownership (TCO) is a financial estimate intended to help buyers and owners determine the direct and indirect costs of a product or service. It is a management accounting concept that can be used in full cost accounting or even ecolog ...
" principles that support the full product lifecycle
In industry, Product Lifecycle Management (PLM) is the process of managing the entire lifecycle of a product from its inception through the engineering, design and manufacture, as well as the service and disposal of manufactured products. PL ...
of a building. An American National Standard
The American National Standards Institute (ANSI ) is a private non-profit organization that oversees the development of voluntary consensus standards for products, services, processes, systems, and personnel in the United States. The organi ...
entitled ''APPA 1000 – Total Cost of Ownership for Facilities Asset Management'' incorporates BIM to factor in a variety of critical requirements and costs over the life-cycle of the building, including but not limited to: replacement of energy, utility, and safety systems; continual maintenance of the building exterior and interior and replacement of materials; updates to design and functionality; and recapitalization costs.
BIM in green building
BIM in green building
Green building (also known as green construction or sustainable building) refers to both a structure and the application of processes that are environmentally responsible and resource-efficient throughout a building's life-cycle: from planni ...
, or "green BIM", is a process that can help architecture, engineering and construction firms to improve sustainability in the built environment. It can allow architects and engineers to integrate and analyze environmental issues in their design over the life cycle
Life cycle, life-cycle, or lifecycle may refer to:
Science and academia
*Biological life cycle, the sequence of life stages that an organism undergoes from birth to reproduction ending with the production of the offspring
* Life-cycle hypothesis ...
of the asset.
International developments
Asia
China
China began its exploration on informatisation in 2001. The Ministry of Construction announced BIM was as the key application technology of informatisation in ''"Ten new technologies of construction industry"'' (by 2010). The Ministry of Science and Technology (MOST) clearly announced BIM technology as a national key research and application project in ''"12th Five-Year" Science and Technology Development Planning.'' Therefore, the year 2011 was described as ''"The First Year of China's BIM"''.
Hong Kong
In 2006 the Hong Kong Housing Authority introduced BIM, and then set a target of full BIM implementation in 2014/2015. BuildingSmart Hong Kong was inaugurated in Hong Kong SAR in late April 2012. The Government of Hong Kong mandates the use of BIM for all government projects over HK$30M since 1 January 2018.
India
India Building Information Modelling Association (IBIMA) is a national-level society that represents the entire Indian BIM community. In India BIM is also known as VDC: Virtual Design and Construction. Due to its population and economic growth, India has an expanding construction market. In spite of this, BIM usage was reported by only 22% of respondents in a 2014 survey. In 2019, government officials said BIM could help save up to 20% by shortening construction time, and urged wider adoption by infrastructure ministries.
Iran
The Iran Building Information Modeling Association (IBIMA) was founded in 2012 by professional engineers from five universities in Iran, including the Civil and Environmental Engineering Department at Amirkabir University of Technology. While it is not currently active, IBIMA aims to share knowledge resources to support construction engineering management decision-making.
Malaysia
BIM implementation is targeted towards BIM Stage 2 by the year 2020 led by the Construction Industry Development Board (CIDB Malaysia). Under the Construction Industry Transformation Plan (CITP 2016–2020), it is hoped more emphasis on technology adoption across the project life-cycle will induce higher productivity.
Singapore
The Building and Construction Authority (BCA) has announced that BIM would be introduced for architectural submission (by 2013), structural and M&E submissions (by 2014) and eventually for plan submissions of all projects with gross floor area of more than 5,000 square meters by 2015. The BCA Academy is training students in BIM.
Japan
The Ministry of Land, Infrastructure and Transport (MLIT) has announced "Start of BIM pilot project in government building and repairs" (by 2010). Japan Institute of Architects (JIA) released the BIM guidelines (by 2012), which showed the agenda and expected effect of BIM to architects. MLIT announced " BIM will be mandated for all of its public works from the fiscal year of 2023, except those having particular reasons". The works subject to WTO Government Procurement Agreement shall comply with the published ISO standards related to BIM such as ISO19650 series as determined by the Article 10 (Technical Specification) of the Agreement.
South Korea
Small BIM-related seminars and independent BIM effort existed in South Korea even in the 1990s. However, it was not until the late 2000s that the Korean industry paid attention to BIM. The first industry-level BIM conference was held in April 2008, after which, BIM has been spread very rapidly. Since 2010, the Korean government has been gradually increasing the scope of BIM-mandated projects. McGraw Hill published a detailed report in 2012 on the status of BIM adoption and implementation in South Korea.
United Arab Emirates
Dubai Municipality
Dubai Municipality ( ar, بلدية دبي) is the Government of Dubai municipal body with jurisdiction over city services and the upkeep of facilities in the Emirate of Dubai, United Arab Emirates and reports directly to the Dubai Executive Coun ...
issued a circular (196) in 2014 mandating BIM use for buildings of a certain size, height or type. The one page circular initiated strong interest in BIM and the market responded in preparation for more guidelines and direction. In 2015 the Municipality issued another circular (207) titled 'Regarding the expansion of applying the (BIM) on buildings and facilities in the emirate of Dubai' which made BIM mandatory on more projects by reducing the minimum size and height requirement for projects requiring BIM. This second circular drove BIM adoption further with several projects and organizations adopting UK BIM standards as best practice. In 2016, the UAE's Quality and Conformity Commission set up a BIM steering group to investigate statewide adoption of BIM.
Europe
Austria
Austrian standards for digital modeling are summarized in the ÖNORM A 6241, published on 15 March 2015. The ÖNORM A 6241-1 (BIM Level 2), which replaced the ÖNORM A 6240-4, has been extended in the detailed and executive design stages, and corrected in the lack of definitions. The ÖNORM A 6241-2 (BIM Level 3) includes all the requirements for the BIM Level 3 (iBIM).
Czech Republic
The Czech BIM Council, established in May 2011, aims to implement BIM methodologies into the Czech building and designing processes, education, standards and legislation.
Estonia
In Estonia digital construction cluster (Digitaalehituse Klaster) was formed in 2015 to develop BIM solutions for the whole life-cycle of construction. The strategic objective of the cluster is to develop an innovative digital construction environment as well as VDC new product development
In business and engineering, new product development (NPD) covers the complete process of bringing a new product to market, renewing an existing product or introducing a product in a new market. A central aspect of NPD is product design, along ...
, Grid and e-construction portal to increase the international competitiveness and sales of Estonian businesses in the construction field. The cluster is equally co-funded by European Structural and Investment Funds through Enterprise Estonia and by the members of the cluster with a total budget of 600 000 euros for the period 2016–2018.
France
The French arm of buildingSMART
buildingSMART, formerly the International Alliance for Interoperability (IAI), is an international organisation which aims to improve the exchange of information between software applications used in the construction industry. It has developed Indu ...
, called Mediaconstruct (existing since 1989), is supporting digital transformation in France. A building transition digital plan – French acronym PTNB – was created in 2013 (mandated since 2015 to 2017 and under several ministries). A 2013 survey of European BIM practice showed France in last place, but, with government support, in 2017 it had risen to third place with more than 30% of real estate projects carried out using BIM. PTNB was superseded in 2018 by Plan BIM 2022, administered by an industry body, the Association for the Development of Digital in Construction (AND Construction), founded in 2017, and supported by a digital platform, KROQI, developed and launched in 2017 by CSTB (France's Scientific and Technical Centre for Building
The ''Centre Scientifique et Technique du Bâtiment'' (Scientific and Technical Center for Building) CSTB, is the France, French national organisation providing research and innovation, consultancy, testing, training and certification services in t ...
).
Germany
In December 2015, the German minister for transport Alexander Dobrindt
Alexander Dobrindt (born 7 June 1970) is a German politician of the Christian Social Union of Bavaria (CSU). Between 2013 and 2017, he served as Federal Minister of Transport and Digital Infrastructure in the government of Chancellor Angela Mer ...
announced a timetable for the introduction of mandatory BIM for German road and rail projects from the end of 2020. Speaking in April 2016, he said digital design and construction must become standard for construction projects in Germany, with Germany two to three years behind The Netherlands and the UK in aspects of implementing BIM. BIM was piloted in many areas of German infrastructure delivery and in July 2022 Volker Wissing
Volker Wissing (born 22 April 1970) is a German lawyer, former judge and politician of the liberal Free Democratic Party (FDP) who has been serving as the party's General Secretary since 2020, and as Minister for Transport in the federal govern ...
, Federal Minister for Digital and Transport, announced that, from 2025, BIM will be used as standard in the construction of federal trunk roads in addition to the rail sector.
Ireland
In November 2017, Ireland's Department for Public Expenditure and Reform launched a strategy to increase use of digital technology in delivery of key public works projects, requiring the use of BIM to be phased in over the next four years.
Italy
Through the new D.l. 50, in April 2016 Italy has included into its own legislation several European directives including 2014/24/EU on Public Procurement. The decree states among the main goals of public procurement the "rationalization of designing activities and of all connected verification processes, through the progressive adoption of digital methods and electronic instruments such as Building and Infrastructure Information Modelling". A norm in 8 parts is also being written to support the transition: UNI 11337-1, UNI 11337-4 and UNI 11337-5 were published in January 2017, with five further chapters to follow within a year.
In early 2018 the Italian Ministry of Infrastructure and Transport issued a decree (DM 01/12/17) creating a governmental BIM Mandate compelling public client organisations to adopt a digital approach by 2025, with an incremental obligation which will start on 1 January 2019.
Lithuania
Lithuania is moving towards adoption of BIM infrastructure by founding a public body "Skaitmeninė statyba" (Digital Construction), which is managed by 13 associations. Also, there is a BIM work group established by Lietuvos Architektų Sąjunga (a Lithuanian architects body). The initiative intends Lithuania to adopt BIM, Industry Foundation Classes (IFC) and National Construction Classification as standard. An international conference "Skaitmeninė statyba Lietuvoje" (Digital Construction in Lithuania) has been held annually since 2012.
The Netherlands
On 1 November 2011, the Rijksgebouwendienst, the agency within the Dutch Ministry of Housing, Spatial Planning and the Environment that manages government buildings, introduced the Rgd BIM Standard, which it updated on 1 July 2012.
Norway
In Norway BIM has been used increasingly since 2008. Several large public clients require use of BIM in open formats (IFC) in most or all of their projects. The Government Building Authority bases its processes on BIM in open formats to increase process speed and quality, and all large and several small and medium-sized contractors use BIM. National BIM development is centred around the local organisation, buildingSMART Norway which represents 25% of the Norwegian construction industry.
Poland
BIMKlaster (BIM Cluster) is a non-governmental, non-profit organisation established in 2012 with the aim of promoting BIM development in Poland. In September 2016, the Ministry of Infrastructure and Construction began a series of expert meetings concerning the application of BIM methodologies in the construction industry.
Portugal
Created in 2015 to promote the adoption of BIM in Portugal and its normalisation, the Technical Committee for BIM Standardisation, CT197-BIM, has created the first strategic document for construction 4.0 in Portugal, aiming to align the country's industry around a common vision, integrated and more ambitious than a simple technology change.
Russia
The Russian government has approved a list of the regulations that provide the creation of a legal framework for the use of information modeling of buildings in construction and encourages the use of BIM in government projects.
Slovakia
The BIM Association of Slovakia, "BIMaS", was established in January 2013 as the first Slovak professional organisation focused on BIM. Although there are neither standards nor legislative requirements to deliver projects in BIM, many architects, structural engineers and contractors, plus a few investors are already applying BIM. A Slovak implementation strategy created by BIMaS and supported by the Chamber of Civil Engineers and Chamber of Architects has yet to be approved by Slovak authorities due to their low interest in such innovation.
Spain
A July 2015 meeting at Spain's Ministry of Infrastructure inisterio de Fomentolaunched the country's national BIM strategy, making BIM a mandatory requirement on public sector projects with a possible starting date of 2018. Following a February 2015 BIM summit in Barcelona, professionals in Spain established a BIM commission (ITeC) to drive the adoption of BIM in Catalonia.
Switzerland
Since 2009 through the initiative of buildingSmart Switzerland, then 2013, BIM awareness among a broader community of engineers and architects was raised due to the open competition for Basel
, french: link=no, Bâlois(e), it, Basilese
, neighboring_municipalities= Allschwil (BL), Hégenheim (FR-68), Binningen (BL), Birsfelden (BL), Bottmingen (BL), Huningue (FR-68), Münchenstein (BL), Muttenz (BL), Reinach (BL), Riehen (BS ...
's Felix Platter Hospital where a BIM coordinator was sought. BIM has also been a subject of events by the Swiss Society for Engineers and Architects, SIA.
United Kingdom
In May 2011 UK Government Chief Construction Adviser Paul Morrell
Paul Dring Morrell (born 28 February 1948) is an English chartered quantity surveyor, former senior partner of Davis Langdon, and from November 2009 to November 2012 the UK Government's first Chief Construction Adviser.
Career
After graduati ...
called for BIM adoption on UK government construction projects. Morrell also told construction professionals to adopt BIM or be "Betamaxed out". In June 2011 the UK government published its BIM strategy, announcing its intention to require collaborative 3D BIM (with all project and asset information, documentation and data being electronic) on its projects by 2016. Initially, compliance would require building data to be delivered in a vendor-neutral ' COBie' format, thus overcoming the limited interoperability of BIM software suites available on the market. The UK Government BIM Task Group led the government's BIM programme and requirements, including a free-to-use set of UK standards and tools that defined 'level 2 BIM'. In April 2016, the UK Government published a new central web portal as a point of reference for the industry for 'level 2 BIM'. The work of the BIM Task Group now continues under the stewardship of the Cambridge
Cambridge ( ) is a College town, university city and the county town in Cambridgeshire, England. It is located on the River Cam approximately north of London. As of the 2021 United Kingdom census, the population of Cambridge was 145,700. Cam ...
-based Centre for Digital Built Britain
The Centre for Digital Built Britain (CDBB) was a partnership between the University of Cambridge and UK's Department for Business, Energy and Industry Strategy. The CDBB was established in 2017 to support the transformation of the UK built envir ...
(CDBB), announced in December 2017 and formally launched in early 2018.
Outside of government, industry adoption of BIM from 2016 has been led by the UK BIM Alliance, an independent, not-for-profit, collaboratively-based organisation formed to champion and enable the implementation of BIM, and to connect and represent organisations, groups and individuals working towards digital transformation of the UK's built environment industry. The UK BIM Alliance's executive team directs activities in three core areas: engagement, implementation and operations (internal support and secretariat functions). In November 2017, the UK BIM Alliance merged with the UK chapter of BuildingSMART. In October 2019, CDBB, the UK BIM Alliance and the BSI Group
The British Standards Institution (BSI) is the national standards body of the United Kingdom. BSI produces technical standards on a wide range of products and services and also supplies certification and standards-related services to business ...
launched the UK BIM Framework. Superseding the BIM levels approach, the framework describes an overarching approach to implementing BIM in the UK, giving free guidance on integrating the international ISO 19650 series of standards into UK processes and practice.
National Building Specification
NBS (National Building Specification) is a UK-based business providing construction specification information used by architects, engineers and other building professionals to describe the materials, standards and workmanship of a construction pro ...
(NBS) has published research into BIM adoption in the UK since 2011, and in 2020 published its 10th annual BIM report. In 2011, 43% of respondents had not heard of BIM; in 2020 73% said they were using BIM.
North America
Canada
Several organizations support BIM adoption and implementation in Canada: the Canada BIM Council (CANBIM, founded in 2008), the Institute for BIM in Canada, and buildingSMART Canada (the Canadian chapter of buildingSMART
buildingSMART, formerly the International Alliance for Interoperability (IAI), is an international organisation which aims to improve the exchange of information between software applications used in the construction industry. It has developed Indu ...
International).
United States
The and US contracting firms have developed various working definitions of BIM that describe it generally as:
:''an object-oriented building development tool that utilizes 5-D modeling concepts, information technology and software interoperability to design, construct and operate a building project, as well as communicate its details.''
Although the concept of BIM and relevant processes are being explored by contractors, architects and developers alike, the term itself has been questioned and debated with alternatives including Virtual Building Environment (VBE) also considered. Unlike some countries such as the UK, the US has not adopted a set of national BIM guidelines, allowing different systems to remain in competition. In 2021, the National Institute of Building Sciences
The National Institute of Building Sciences is a non-profit, non-governmental organization that brings together representatives of government, the professions, industry, labor and consumer interests, and regulatory agencies to focus on the identif ...
(NIBS) looked at applying UK BIM experiences to developing shared US BIM standards and processes. The US National BIM Standard had largely been developed through volunteer efforts; NIBS aimed to create a national BIM programme to drive effective adoption at a national scale.
BIM is seen to be closely related to Integrated Project Delivery Integrated project delivery (IPD) is a construction project delivery method that seeks efficiency and involvement of all participants (people, systems, business structures and practices) through all phases of design, fabrication, and construction. I ...
(IPD) where the primary motive is to bring the teams together early on in the project. A full implementation of BIM also requires the project teams to collaborate from the inception stage and formulate model sharing and ownership contract documents.
The American Institute of Architects
The American Institute of Architects (AIA) is a professional organization for architects in the United States. Headquartered in Washington, D.C., the AIA offers education, government advocacy, community redevelopment, and public outreach to su ...
has defined BIM as "a model-based technology linked with a database of project information", and this reflects the general reliance on database technology as the foundation. In the future, structured text documents such as specifications
A specification often refers to a set of documented requirements to be satisfied by a material, design, product, or service. A specification is often a type of technical standard.
There are different types of technical or engineering specificati ...
may be able to be searched and linked to regional, national, and international standards.
Africa
Nigeria
BIM has the potential to play a vital role in the Nigerian AEC sector. In addition to its potential clarity and transparency, it may help promote standardization across the industry. For instance, Utiome suggests that, in conceptualizing a BIM-based knowledge transfer framework from industrialized economies to urban construction projects in developing nations, generic BIM objects can benefit from rich building information within specification parameters in product libraries, and used for efficient, streamlined design and construction. Similarly, an assessment of the current 'state of the art' by Kori found that medium and large firms were leading the adoption of BIM in the industry. Smaller firms were less advanced with respect to process and policy adherence. There has been little adoption of BIM in the built environment due to construction industry resistance to changes or new ways of doing things. The industry is still working with conventional 2D CAD systems in services and structural designs, although production could be in 3D systems. There is virtually no utilisation of 4D and 5D systems.
BIM Africa Initiative, primarily based in Nigeria, is a non-profit institute advocating the adoption of BIM across Africa. Since 2018, it has been engaging with professionals and the government towards the digital transformation of the built industry. Produced annually by its research and development committee, the African BIM Report gives an overview of BIM adoption across the African continent.
South Africa
The South African BIM Institute, established in May 2015, aims to enable technical experts to discuss digital construction solutions that can be adopted by professionals working within the construction sector. Its initial task was to promote the SA BIM Protocol.
There are no mandated or national best practice BIM standards or protocols in South Africa. Organisations implement company-specific BIM standards and protocols at best (there are isolated examples of cross-industry alliances).
Oceania
Australia
In February 2016, Infrastructure Australia recommended: "Governments should make the use of Building Information Modelling (BIM) mandatory for the design of large-scale complex infrastructure projects. In support of a mandatory rollout, the Australian Government should commission the Australasian Procurement and Construction Council, working with industry, to develop appropriate guidance around the adoption and use of BIM; and common standards and protocols to be applied when using BIM".
New Zealand
In 2015, many projects in the rebuilding of Christchurch
Christchurch ( ; mi, Ōtautahi) is the largest city in the South Island of New Zealand and the seat of the Canterbury Region. Christchurch lies on the South Island's east coast, just north of Banks Peninsula on Pegasus Bay. The Avon Rive ...
were being assembled in detail on a computer using BIM well before workers set foot on the site. The New Zealand government started a BIM acceleration committee, as part of a productivity partnership with the goal of 20 per cent more efficiency in the construction industry by 2020.
Future potential
BIM is a relatively new technology in an industry typically slow to adopt change. Yet many early adopters are confident that BIM will grow to play an even more crucial role in building documentation.
Proponents claim that BIM offers:
#Improved visualization
#Improved productivity due to easy retrieval of information
#Increased coordination of construction documents
#Embedding and linking of vital information such as vendors for specific materials, location of details and quantities required for estimation and tendering
#Increased speed of delivery
#Reduced costs
BIM also contains most of the data needed for building performance Building performance is an attribute of a building that expresses how well that building carries out its functions. It may also relate to the performance of the building construction process. Categories of building performance are quality (how well ...
analysis. The building properties in BIM can be used to automatically create the input file for building performance simulation
Building performance simulation (BPS) is the replication of aspects of building performance using a computer-based, mathematical model created on the basis of fundamental physical principles and sound engineering practice. The objective of buildin ...
and save a significant amount of time and effort. Moreover, automation of this process reduce errors and mismatches in the building performance simulation process.
Purposes or dimensionality
Some purposes or uses of BIM may be described as 'dimensions'. However, there is little consensus on definitions beyond 5D. Some organisations dismiss the term; for example, the UK Institution of Structural Engineers
The Institution of Structural Engineers is a professional body for structural engineering based in the United Kingdom.
The Institution has over 30,000 members operating in over 100 countries. The Institution provides professional accreditation ...
does not recommend using nD modelling terms beyond 4D, adding "cost (5D) is not really a 'dimension'."
3D
3D BIM, an acronym for three-dimensional
Three-dimensional space (also: 3D space, 3-space or, rarely, tri-dimensional space) is a geometric setting in which three values (called ''parameters'') are required to determine the position of an element (i.e., point). This is the informa ...
building information modeling, refers to the graphical representation of an asset's geometric design, augmented by information describing attributes of individual components. 3D BIM work may be undertaken by professional disciplines such as architectural, structural, and MEP, and the use of 3D models enhances coordination and collaboration between disciplines. A 3D virtual model can also be created by creating a point cloud
Point or points may refer to:
Places
* Point, Lewis, a peninsula in the Outer Hebrides, Scotland
* Point, Texas, a city in Rains County, Texas, United States
* Point, the NE tip and a ferry terminal of Lismore, Inner Hebrides, Scotland
* Poin ...
of the building or facility using laser scanning technology.
4D
4D BIM, an acronym for 4-dimensional building information modeling, refers to the intelligent linking of individual 3D CAD
In 3D computer graphics, 3D modeling is the process of developing a mathematical coordinate-based representation of any surface of an object (inanimate or living) in three dimensions via specialized software by manipulating edges, vertices, an ...
components or assemblies with time- or scheduling-related information. The term 4D refers to the fourth dimension: time
Time is the continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present, into the future. It is a component quantity of various measurements used to sequence events, ...
, i.e. 3D plus time.
4D modelling enables project participants (architects, designers, contractors, clients) to plan, sequence the physical activities, visualise the critical path of a series of events, mitigate the risks, report and monitor progress of activities through the lifetime of the project. 4D BIM enables a sequence of events to be depicted visually on a time line that has been populated by a 3D model, augmenting traditional Gantt chart
A Gantt chart is a type of bar chart that illustrates a project schedule, named after its popularizer, Henry Gantt (1861–1919), who designed such a chart around the years 1910–1915. Modern Gantt charts also show the dependency relationshi ...
s and critical path (CPM) schedules often used in project management. Construction sequences can be reviewed as a series of problems using 4D BIM, enabling users to explore options, manage solutions and optimize results.
As an advanced construction management technique, it has been used by project delivery teams working on larger projects. 4D BIM has traditionally been used for higher end projects due to the associated costs, but technologies are now emerging that allow the process to be used by laymen or to drive processes such as manufacture.
5D
5D BIM, an acronym for 5-dimensional
A five-dimensional space is a space with five dimensions. In mathematics, a sequence of ''N'' numbers can represent a location in an ''N''-dimensional space. If interpreted physically, that is one more than the usual three spatial dimensions ...
building information modeling refers to the intelligent linking of individual 3D components or assemblies with time schedule (4D BIM) constraints[ and then with cost-related information.] 5D models enable participants to visualise construction progress and related costs over time. This BIM-centric project management technique has potential to improve management and delivery of projects of any size or complexity.
In June 2016, McKinsey & Company identified 5D BIM technology as one of five big ideas poised to disrupt construction. It defined 5D BIM as "a five-dimensional representation of the physical and functional characteristics of any project. It considers a project’s time schedule and cost in addition to the standard spatial design parameters in 3-D."
6D
6D BIM, an acronym for 6-dimensional building information modeling, is sometimes used to refer to the intelligent linking of individual 3D components or assemblies with all aspects of project life-cycle management information. However, there is less consensus about the definition of 6D BIM; it is also sometimes used to cover use of BIM for sustainability purposes.
In the project life cycle context, a 6D model is usually delivered to the owner when a construction project is finished. The "As-Built" BIM model is populated with relevant building component information such as product data and details, maintenance/operation manuals, cut sheet specifications, photos, warranty data, web links to product online sources, manufacturer information and contacts, etc. This database is made accessible to the users/owners through a customized proprietary web-based environment. This is intended to aid facilities managers in the operation and maintenance of the facility.
The term is less commonly used in the UK and has been replaced with reference to the Asset Information Requirements (AIR) and an Asset Information Model (AIM) as specified in BS EN ISO 19650-3:2020.
See also
* Data model
A data model is an abstract model that organizes elements of data and standardizes how they relate to one another and to the properties of real-world entities. For instance, a data model may specify that the data element representing a car be c ...
* Design computing
The terms design computing and other relevant terms including design and computation and computational design refer to the study and practice of design activities through the application and development of novel ideas and techniques in computing. O ...
* Digital twin (the physical manifestation instrumented and connected to the model)
* GIS
* Digital Building Logbook
The Digital Building Logbook is a proposal aiming at establishing a common European approach that aggregates all relevant data about a building and ensures that authorised people can access accurate information about the building.
See also
* E ...
* Lean construction
* Macro BIM Macro BIM (Building Information Model) is a building information model, assembled of higher level building elements, used for macro level analysis including visualization, spatial validation, cost modeling/estimating, phasing/sequencing, energy p ...
* OpenStreetMap
* Pre-fire planning
* System information modelling System information modelling (SIM) is the process of modelling complex connected systems. System information models are digital representations of connected systems, such as electrical instrumentation and control, power, and communication systems. ...
* Whole Building Design Guide
The Whole Building Design Guide or WBDG is guidance in the United States, described by the Federal Energy Management Program as "a complete internet resource to a wide range of building-related design guidance, criteria and technology", and meets ...
References
Further reading
* Kensek, Karen (2014). ''Building Information Modeling'', Routledge.
* Kensek, Karen and Noble, Douglas (2014). ''Building Information Modeling: BIM in Current and Future Practice'', Wiley.
*
* Lévy, François (2011). ''BIM in Small-Scale Sustainable Design'', Wiley.
* Weygant, Robert S. (2011) ''BIM Content Development: Standards, Strategies, and Best Practices'', Wiley.
*
* Smith, Dana K. and Tardif, Michael (2009). ''Building Information Modeling: A Strategic Implementation Guide for Architects, Engineers, Constructors, and Real Estate Asset Managers'', Wiley.
* Underwood, Jason, and Isikdag, Umit (2009). ''Handbook of Research on Building Information Modeling and Construction Informatics: Concepts and Technologies'', Information Science Publishing.
* Krygiel, Eddy and Nies, Brad (2008). ''Green BIM: Successful Sustainable Design with Building Information Modeling'', Sybex.
* Kymmell, Willem (2008). ''Building Information Modeling: Planning and Managing Construction Projects with 4D CAD and Simulations'', McGraw-Hill Professional.
*
{{Authority control
Data modeling
Computer-aided design
Construction
Architecture
Building engineering