![Nrcc 600 c and load](https://upload.wikimedia.org/wikipedia/commons/2/24/Nrcc_600_c_and_load.jpg)
Building science is the science and technology-driven collection of knowledge in order to provide better indoor environmental quality (IEQ),
energy-efficient built environments, and
occupant comfort and satisfaction. ''Building physics, architectural science'', and ''applied physics'' are terms used for the knowledge domain that overlaps with building science. In building science, the methods used in natural and
hard sciences
Hard science and soft science are colloquialism, colloquial terms used to compare scientific fields on the basis of perceived Scientific method, methodological rigor, exactitude, and objectivity. Roughly speaking, the formal sciences & natural sci ...
are widely applied, which may include controlled and
quasi-experiment
A quasi-experiment is an empirical interventional study used to estimate the causal impact of an intervention on target population without random assignment. Quasi-experimental research shares similarities with the traditional experimental design ...
s, randomized control, physical measurements, remote sensing, and
simulations
A simulation is the imitation of the operation of a real-world process or system over time. Simulations require the use of models; the model represents the key characteristics or behaviors of the selected system or process, whereas the s ...
. On the other hand, methods from social and
soft sciences
Hard science and soft science are colloquial terms used to compare scientific fields on the basis of perceived methodological rigor, exactitude, and objectivity. Roughly speaking, the formal sciences & natural sciences are considered "hard", whe ...
, such as
case study
A case study is an in-depth, detailed examination of a particular case (or cases) within a real-world context. For example, case studies in medicine may focus on an individual patient or ailment; case studies in business might cover a particular fi ...
,
interviews & focus group,
observational method,
surveys, and
experience sampling, are also widely used in building science to understand occupant satisfaction, comfort, and experiences by acquiring qualitative data. One of the recent trends in building science is a combination of the two different methods. For instance, it is widely known that occupants’ thermal sensation and comfort may vary depending on their sex, age, emotion, experiences, etc even in the same indoor environment. Despite the advancement in data extraction and collection technology in building science, objective measurements alone can hardly represent occupants' state of mind such as comfort and preference. Therefore, researchers are trying to measure both physical contexts and understand human responses to figure out complex interrelationships.
Building science traditionally includes the study of indoor thermal environment,
indoor acoustic environment,
indoor light environment,
indoor air quality
Indoor air quality (IAQ) is the air quality within and around buildings and structures. IAQ is known to affect the health, comfort, and well-being of building occupants. Poor indoor air quality has been linked to sick building syndrome, reduce ...
, and building resource use, including energy and
building material
Building material is material used for construction. Many naturally occurring substances, such as clay, rock (geology), rocks, sand, wood, and even twigs and leaves, have been used to construct buildings. Apart from naturally occurring materia ...
use. These areas are studied in terms of physical principles, relationship to building occupant health,
comfort
Comfort (or being comfortable'')'' is a sense of physical or psychological ease, often characterized as a lack of hardship. Persons who are lacking in comfort are uncomfortable, or experiencing discomfort. A degree of psychological comfort c ...
, and productivity, and how they can be controlled by the
building envelope A building envelope is the physical separator between the conditioned and unconditioned environment of a building including the resistance to air, water, heat, light, and noiseSyed, Asif. ''Advanced building technologies for sustainability''. Hoboke ...
and electrical and
mechanical systems
A machine is a physical system using power to apply forces and control movement to perform an action. The term is commonly applied to artificial devices, such as those employing engines or motors, but also to natural biological macromolecul ...
. The National Institute of Building Sciences (NIBS) additionally includes the areas of
building information modeling,
building commissioning
Building commissioning (Cx) is an integrated, systematic process to ensure, through documented verification, that all building systems perform interactively according to the "Design Intent". The commissioning process establishes and documents the ...
,
fire protection engineering
Fire protection engineering is the application of science and engineering principles to protect people, property, and their environments from the harmful and destructive effects of fire and smoke. It encompasses engineering which focuses on fire ...
,
seismic design and resilient design within its scope.
One of the practical purpose of building science is to provide predictive capability to optimize the
building performance Building performance is an attribute of a building that expresses how well that building carries out its functions. It may also relate to the performance of the building construction process. Categories of building performance are quality (how well ...
and
sustainability of new and existing buildings, understand or prevent building failures, and guide the design of new techniques and technologies.
Applications
During the architectural design process, building science knowledge is used to inform design decisions to optimize building performance. Design decisions can be made based on knowledge of building science principles and established guidelines, such as the NIBS
Whole Building Design Guide (WBDG) and the collection of
ASHRAE Standards related to building science.
Computational tools can be used during design to
simulate building performance based on input information about the designed
building envelope A building envelope is the physical separator between the conditioned and unconditioned environment of a building including the resistance to air, water, heat, light, and noiseSyed, Asif. ''Advanced building technologies for sustainability''. Hoboke ...
,
lighting system
Lighting or illumination is the deliberate use of light to achieve practical or aesthetic effects. Lighting includes the use of both artificial light sources like lamps and light fixtures, as well as natural illumination by capturing dayligh ...
, and
mechanical system. Models can be used to predict
energy
In physics, energy (from Ancient Greek: ἐνέργεια, ''enérgeia'', “activity”) is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat a ...
use over the building life, solar heat and radiation distribution,
air flow
Airflow, or air flow, is the movement of air. The primary cause of airflow is the existence of air. Air behaves in a fluid manner, meaning particles naturally flow from areas of higher pressure to those where the pressure is lower. Atmospheric ...
, and other physical phenomena within the building.
These tools are valuable for evaluating a design and ensuring it will perform within an acceptable range before construction begins. Many of the available computational tools have the capability to analyze building performance goals and perform
design optimization. The accuracy of the models is influenced by the modeler's knowledge of building science principles and by the amount of
validation performed for the specific program.
When existing buildings are being evaluated, measurements and computational tools can be used to evaluate performance based on measured existing conditions. An array of in-field testing equipment can be used to measure temperature, moisture, sound levels, air pollutants, or other criteria. Standardized procedures for taking these measurements are provided in the Performance Measurement Protocols for Commercial Buildings. For example,
thermal infrared (IR) imaging devices can be used to measure temperatures of building components while the building is in use. These measurements can be used to evaluate how the mechanical system is operating and if there are areas of anomalous heat gain or heat loss through the building envelope.
Measurements of conditions in existing buildings are used as part of
post occupancy evaluations. Post occupancy evaluations may also include surveys of building occupants to gather data on occupant satisfaction and well-being and to gather qualitative data on building performance that may not have been captured by measurement devices.
Many aspects of building science are the responsibility of the
architect
An architect is a person who plans, designs and oversees the construction of buildings. To practice architecture means to provide services in connection with the design of buildings and the space within the site surrounding the buildings that h ...
(in Canada, many architectural firms employ an
architectural technologist The architectural technologist, also known as a building technologist, provides technical building design services and is trained in architectural technology, building technical design and construction.
Architectural technologists apply the science ...
for this purpose), often in collaboration with the engineering disciplines that have evolved to handle 'non-building envelope' building science concerns:
Civil engineering
Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including public works such as roads, bridges, canals, dams, airports, sewage ...
,
Structural engineering
Structural engineering is a sub-discipline of civil engineering in which structural engineers are trained to design the 'bones and muscles' that create the form and shape of man-made structures. Structural engineers also must understand and cal ...
,
Earthquake engineering,
Geotechnical engineering, Mechanical engineering, Electrical engineering,
Acoustic engineering
Acoustical engineering (also known as acoustic engineering) is the branch of engineering dealing with sound and vibration. It includes the application of acoustics, the science of sound and vibration, in technology. Acoustical engineers are typical ...
, & fire code engineering. Even the interior designer will inevitably generate a few building science issues.
Topics
Indoor environmental quality (IEQ)
Indoor environmental quality (IEQ) refers to the quality of a building's environment in relation to the health and wellbeing of those who occupy space within it. IEQ is determined by many factors, including lighting, air quality, and temperature. Workers are often concerned that they have symptoms or health conditions from exposures to contaminants in the buildings where they work. One reason for this concern is that their symptoms often get better when they are not in the building. While research has shown that some respiratory symptoms and illnesses can be associated with damp buildings, it is still unclear what measurements of indoor contaminants show that workers are at risk for disease. In most instances where a worker and his or her physician suspect that the building environment is causing a specific health condition, the information available from medical tests and tests of the environment is not sufficient to establish which contaminants are responsible. Despite uncertainty about what to measure and how to interpret what is measured, research shows that building-related symptoms are associated with building characteristics, including dampness, cleanliness, and ventilation characteristics.
Indoor environments are highly complex and building occupants may be exposed to a variety of contaminants (in the form of gases and particles) from office machines, cleaning products, construction activities, carpets and furnishings, perfumes, cigarette smoke, water-damaged building materials, microbial growth (fungal, mold, and bacterial), insects, and outdoor pollutants. Other factors such as indoor temperatures, relative humidity, and ventilation levels can also affect how individuals respond to the indoor environment. Understanding the sources of indoor environmental contaminants and controlling them can often help prevent or resolve building-related worker symptoms. Practical guidance for improving and maintaining the indoor environment is available.
Building indoor environment covers the environmental aspects in the design, analysis, and operation of energy-efficient, healthy, and comfortable buildings. Fields of specialization include architecture,
HVAC design,
thermal comfort
Thermal comfort is the condition of mind that expresses satisfaction with the thermal environment and is assessed by subjective evaluation ( ANSI/ASHRAE Standard 55).ANSI/ASHRAE Standard 55-2017, Thermal Environmental Conditions for Human Occupan ...
,
indoor air quality
Indoor air quality (IAQ) is the air quality within and around buildings and structures. IAQ is known to affect the health, comfort, and well-being of building occupants. Poor indoor air quality has been linked to sick building syndrome, reduce ...
(IAQ),
lighting
Lighting or illumination is the deliberate use of light to achieve practical or aesthetic effects. Lighting includes the use of both artificial light sources like lamps and light fixtures, as well as natural illumination by capturing daylig ...
,
acoustics, and
control systems
A control system manages, commands, directs, or regulates the behavior of other devices or systems using control loops. It can range from a single home heating controller using a thermostat controlling a domestic boiler to large industrial c ...
.
HVAC systems
The mechanical systems, usually a sub-set of the broader Building Services, used to control the temperature, humidity, pressure and other select aspects of the indoor environment are often described as the Heating, Ventilating, and Air-Conditioning (HVAC) systems. These systems have grown in complexity and importance (often consuming around 20% of the total budget in commercial buildings) as occupants demand tighter control of conditions, buildings become larger, and enclosures and passive measures became less important as a means of providing comfort.
Building science includes the analysis of HVAC systems for both physical impacts (heat distribution, air velocities, relative humidities, etc.) and for effect on the comfort of the building's occupants. Because occupants' perceived comfort is dependent on factors such as current weather and the type of climate the building is located in, the needs for HVAC systems to provide comfortable conditions will vary across projects. In addition, various HVAC control strategies have been implemented and studied to better contribute to occupants' comfort. In the U.S.,
ASHRAE
The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE ) is an American professional association seeking to advance heating, ventilation, air conditioning and refrigeration
The term refrigeration refers to the ...
has published standards to help building managers and engineers design and operate the system. In the UK, a similar guideline was published by
CIBSE
The Chartered Institution of Building Services Engineers (CIBSE; pronounced 'sib-see') is an international professional engineering association based in London, England that represents building services engineers. It is a full member of the Co ...
. Apart from industry practice, advanced control strategies are widely discussed in research as well. For example,
closed-loop feedback control can compare air temperature set-point with sensor measurements;
demand response control can help prevent
electric power-grid from having peak load by reducing or shifting their usage based on time-varying rate. With the improvement from
computational performance and
machine learning
Machine learning (ML) is a field of inquiry devoted to understanding and building methods that 'learn', that is, methods that leverage data to improve performance on some set of tasks. It is seen as a part of artificial intelligence.
Machine ...
algorithms,
model prediction on cooling and heating load with optimal control can further improve occupants comfort by pre-operating the HVAC system.
It is recognized that advanced control strategies implementation is under the scope of developing
Building Automation
Building automation (BAS), also known as building management system (BMS) or building energy management system (BEMS), is the automatic centralized control of a building's HVAC (heating, ventilation and air conditioning), electrical, lighting, ...
System (BMS) with integrated smart communication technologies, such as
Internet of Things
The Internet of things (IoT) describes physical objects (or groups of such objects) with sensors, processing ability, software and other technologies that connect and exchange data with other devices and systems over the Internet or other comm ...
(IoT). However, one of the major obstacles identified by practitioners is the scalability of control logics and building data mapping due to the unique nature of building designs. It was estimated that due to inadequate interoperability, building industry loses $15.8 billion annually in the U.S. Recent research projects like Haystack and Brick intend to address the problem by utilizing
metadata schema, which could provide more accurate and convenient ways of capturing data points and connection hierarchies in building mechanical systems. With the support of semantic models, automated configuration can further benefit HVAC control
commissioning and software upgrades.
Enclosure (envelope) systems
The building enclosure is the part of the building that separates the indoors from the outdoors. This includes the wall, roof, windows, slabs on grade, and joints between all of these. The comfort, productivity, and even health of building occupants in areas near the building enclosure (i.e., perimeter zones) are affected by outdoor influences such as noise, temperature, and solar radiation, and by their ability to control these influences. As part of its function, the enclosure must control (not necessarily block or stop) the flow of moisture, heat, air, vapor, solar radiation, insects, or noise, while resisting the loads imposed on the structure (wind, seismic). Daylight transmittance through glazed components of the facade can be analyzed to evaluate the reduced need for electric lighting.
Building sustainability
Part of building science is the attempt to design buildings with consideration for the future and the resources and realities of tomorrow. This field may also be referred to as
Sustainable architecture, sustainable design. Apart from the design field, around 40% of energy consumption and 13% carbon emissions are related to building HVAC systems operation. In order to mitigate rapid climate change,
renewable energy
Renewable energy is energy that is collected from renewable resources that are naturally replenished on a human timescale. It includes sources such as sunlight, wind, the movement of water, and geothermal heat. Although most renewable energy ...
sources, such as solar and wind energy are adopted by the building industry to support electricity generation. However, the electricity demand profile shows imbalance between supply and demand, which is known as the ‘
duck curve
The duck curve is a graph of power production over the course of a day that shows the timing imbalance between peak demand and renewable energy production. Used in utility-scale electricity generation, the term was coined in 2012 by the Cali ...
’. This could impact on maintaining grid system stability. Therefore, other strategies such as
thermal energy storage
Thermal energy storage (TES) is achieved with widely different technologies. Depending on the specific technology, it allows excess thermal energy to be stored and used hours, days, months later, at scales ranging from the individual process, ...
systems are developed to achieve higher levels of sustainability by reducing grid peak power.
A push towards
zero-energy building
A Zero Energy Building (ZEB), also known as a Net Zero Energy (NZE) building, is a building with net zero energy consumption, meaning the total amount of energy used by the building on an annual basis is equal to the amount of renewable energy ...
also known as Net-Zero Energy Building has been present in the Building Science field. The qualifications for Net Zero Energy Building Certification can be found on the
Living Building Challenge
The Living Building Challenge is an international sustainable building certification program created in 2006 by the non-profit International Living Future Institute. It is described by the Institute as a philosophy, advocacy tool and certification ...
website.
Post-Occupancy Evaluation (POE)
POE is a survey-based method to measure the building performance after the built environment was occupied. The occupant responses were collected through structured or open inquiries. Statistical methods and data visualization were often used to suggest which aspects(features) of the building were supportive or problematic to the occupants. The results may become design knowledge for architects to design new buildings or provide a data-basis to improve the current environment.
Certification
Although there are no direct or integrated professional architecture or engineering certifications for building science, there are independent professional credentials associated with the disciplines. Building science is typically a specialization within the broad areas of architecture or engineering practice. However, there are professional organizations offering individual professional credentials in specialized areas. Some of the most prominent green building rating systems are:
*
BREEAM
BREEAM (Building Research Establishment Environmental Assessment Method), first published by the Building Research Establishment (BRE) in 1990, is the world's longest established method of assessing, rating, and certifying the sustainability of ...
(Building Research Establishment Environmental Assessment Method), which is the world's longest established sustainable building assessment system, developed by the
Building Research Establishment
The Building Research Establishment (BRE) is a centre of building science in the United Kingdom, owned by charitable organisation the BRE Trust. It is a former UK government national laboratory that was privatised in 1997. BRE provides resear ...
;
* LEED (
Leadership in Energy and Environmental Design), developed by the
U.S. Green Building Council
The U.S. Green Building Council (USGBC), co-founded by Mike Italiano, David Gottfried and Rick Fedrizzi in 1993, is a private 501(c)3, membership-based non-profit organization that promotes sustainability in building design, construction, and op ...
;
*
Green Star (Australia)
Green Star is a voluntary sustainability rating system for buildings in Australia. It was launched in 2003 by the Green Building Council of Australia (GBCA).
The Green Star rating system assesses the sustainability of projects at all stages of ...
, which is the main green building rating system in Australia, developed by the
Green Building Council of Australia
Green is the color between cyan and yellow on the visible spectrum. It is evoked by light which has a dominant wavelength of roughly 495570 nm. In subtractive color systems, used in painting and color printing, it is created by a combin ...
;
* WELL which is delivered by the International WELL Building Institute and administered by the
Green Business Certification Inc.
Green Business Certification Inc. (GBCI) is an American organization that provides third-party credentialing and verification for several rating systems relating to the built environment. It was established as the Green Building Certification Inst ...
;
*
CASBEE
CASBEE (Comprehensive Assessment System for Built Environment Efficiency) is the
green building certification program used in Japan. It was created by a research committee called the Japan Sustainable Building Consortium (JSBC). The first asse ...
(Comprehensive Assessment System for Built Environment Efficiency), which is the main green building rating system in Japan.
There are other building sustainability accreditation and certification institutions as well. Also in the US, contractors certified by the Building Performance Institute, an independent organization, advertise that they operate businesses as Building Scientists. This is questionable due to their lack of scientific background and credentials. On the other hand, more formal building science experience is true in Canada for most of the Certified Energy Advisors. Many of these trades and technologists require and receive some training in very specific areas of building science (e.g., air tightness, or thermal insulation).
List of principal building science journals
* ''Building and Environment'': This international journal publishes original research papers and review articles related to building science, urban physics, and human interaction with the indoor and outdoor built environment. The journal's most cited articles cover topics such as occupant behavior in buildings,
green building certification systems
Green building certification systems are a set of rating systems and tools that are used to assess a building or a construction project's performance from a sustainability and environmental perspective. Such ratings aim to improve the overall qua ...
, and tunnel ventilation systems. Publisher:
Elsevier
Elsevier () is a Dutch academic publishing company specializing in scientific, technical, and medical content. Its products include journals such as '' The Lancet'', ''Cell'', the ScienceDirect collection of electronic journals, '' Trends'', ...
. Impact Factor (2019): 4.971
* ''Energy and Buildings'': This international journal publishes articles with explicit links to energy use in buildings. The aim is to present new research results, and new proven practice aimed at reducing the energy needs of a building and improving
indoor air quality
Indoor air quality (IAQ) is the air quality within and around buildings and structures. IAQ is known to affect the health, comfort, and well-being of building occupants. Poor indoor air quality has been linked to sick building syndrome, reduce ...
. The journal's most cited articles cover topics such as prediction models for building energy consumption, optimization models of
HVAC systems, and
life cycle assessment
Life cycle assessment or LCA (also known as life cycle analysis) is a methodology for assessing environmental impacts associated with all the stages of the life cycle of a commercial product, process, or service. For instance, in the case o ...
. Publisher: Elsevier. Impact Factor (2019): 4.867
* ''Indoor Air:'' This international journal publishes papers reflecting the broad categories of interest in the field of indoor environment of non-industrial buildings, including
health effects
Health effects (or health impacts) are changes in health resulting from exposure to a source. Health effects are an important consideration in many areas, such as hygiene, pollution studies, occupational safety and health, ( utrition and health s ...
,
thermal comfort
Thermal comfort is the condition of mind that expresses satisfaction with the thermal environment and is assessed by subjective evaluation ( ANSI/ASHRAE Standard 55).ANSI/ASHRAE Standard 55-2017, Thermal Environmental Conditions for Human Occupan ...
, monitoring and modelling, source characterization, and
ventilation (architecture)
Ventilation is the intentional introduction of outdoor air into a space. Ventilation is mainly used to control indoor air quality by diluting and displacing indoor pollutants; it can also be used to control indoor temperature, humidity, and air m ...
and other
environmental control
Heating, ventilation, and air conditioning (HVAC) is the use of various technologies to control the temperature, humidity, and purity of the air in an enclosed space. Its goal is to provide thermal comfort and acceptable indoor air quality. HV ...
techniques. The journal's most cited articles cover topics such as the impact of indoor
air pollutants
Air pollution is the contamination of air due to the presence of substances in the atmosphere that are harmful to the health of humans and other living beings, or cause damage to the climate or to materials. There are many different types ...
and thermal conditions on occupant performance, the movement of droplets in indoor environments, and the effects of ventilation rates on occupant health. Publisher:
John Wiley & Sons
John Wiley & Sons, Inc., commonly known as Wiley (), is an American multinational publishing company founded in 1807 that focuses on academic publishing and instructional materials. The company produces books, journals, and encyclopedias, ...
. Impact Factor (2019): 4.739
* ''Architectural Science Review'': Founded at the University of Syndey, Australia in 1958, this journal aims to promote the development, accumulation, and application of scientific knowledge on a wide range of environmental topics. According to the journal description, the topics may include but not limited to building science and technology, environmental sustainability, structures and materials, audio and acoustics, illumination, thermal systems, building physics, building services, building climatology, building economics, ergonomics, history and theory of architectural science, the social sciences of architecture. Publisher:
Taylor & Francis Group
Taylor & Francis Group is an international company originating in England that publishes books and academic journals. Its parts include Taylor & Francis, Routledge, F1000 (publisher), F1000 Research or Dovepress. It is a division of Informa ...
* ''Building Research and Information'': This journal focuses on buildings, building stocks and their supporting systems. Unique to BRI is a holistic and transdisciplinary approach to buildings, which acknowledges the complexity of the built environment and other systems over their life. Published articles utilize conceptual and evidence-based approaches which reflect the complexity and linkages between culture, environment, economy, society, organizations, quality of life, health, well-being, design and engineering of the built environment. The journal's most cited articles cover topics such as the gap between performance and actual energy consumption, barriers and drivers for sustainable building, and the politics of resilient cities. Publisher:
Taylor & Francis Group
Taylor & Francis Group is an international company originating in England that publishes books and academic journals. Its parts include Taylor & Francis, Routledge, F1000 (publisher), F1000 Research or Dovepress. It is a division of Informa ...
. Impact Factor (2019): 3.887
* ''Journal of Building Performance Simulation'': This international, peer-reviewed journal publishes high quality research and state of the art “integrated” papers to promote scientifically thorough advancement of all the areas of non-structural performance of a building and particularly in
heat transfer
Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, ...
, air, moisture transfer. The journal's most cited articles cover topics such as co-simulation of building energy and control systems, the Buildings library, and the impact of occupant's behavior on building energy demand. Publisher: Taylor & Francis Group. Impact Factor (2019): 3.458
* ''LEUKOS'': This journal publishes engineering developments, scientific discoveries, and experimental results related to light applications. Topics of interest include
optical radiation
Optical radiation is part of the electromagnetic spectrum. It is subdivided into ultraviolet radiation (UV), the spectrum of light visible for man (VIS) and infrared radiation
Infrared (IR), sometimes called infrared light, is electromagnetic ...
,
light generation,
light control
Light or visible light is electromagnetic radiation that can be perceived by the human eye. Visible light is usually defined as having wavelengths in the range of 400–700 nanometres (nm), corresponding to frequencies of 750–420 ter ...
, light measurement, lighting design,
daylighting,
energy management
Energy management includes planning and operation of energy production and energy consumption units as well as energy distribution and storage. Objectives are resource conservation, climate protection and cost savings, while the users have per ...
,
energy economics
Energy economics is a broad scientific subject area which includes topics related to supply and use of energy in societies. Considering the cost of energy services and associated value gives economic meaning to the efficiency at which energy c ...
, and sustainability. The journal's most cited articles cover topics such as lighting design metrics, psychological processes influencing lighting quality, and the effects of lighting quality and energy-efficiency on task performance, mood, health, satisfaction, and comfort. Publisher: Taylor & Francis Group. Impact Factor (2019): 2.667
* ''Building Simulation'': This international journal publishes original, high quality, peer-reviewed research papers and review articles dealing with modeling and simulation of buildings including their systems. The goal is to promote the field of building science and technology to such a level that modeling will eventually be used in every aspect of building construction as a routine instead of an exception. Of particular interest are papers that reflect recent developments and applications of modeling tools and their impact on advances of building science and technology. Publisher:
Springer Nature
Springer Nature or the Springer Nature Group is a German-British academic publishing company created by the May 2015 merger of Springer Science+Business Media and Holtzbrinck Publishing Group's Nature Publishing Group, Palgrave Macmillan, and Macm ...
. Impact Factor (2019): 2.472
* ''Applied Acoustics'': This journal covers research findings related to practical applications of acoustics in engineering and science. The journal's most cited articles related to building science cover topics such as the prediction of the sound
absorption
Absorption may refer to:
Chemistry and biology
* Absorption (biology), digestion
**Absorption (small intestine)
*Absorption (chemistry), diffusion of particles of gas or liquid into liquid or solid materials
*Absorption (skin), a route by which ...
of natural materials, the implementation of low-cost urban acoustic monitoring devices, and sound
absorption
Absorption may refer to:
Chemistry and biology
* Absorption (biology), digestion
**Absorption (small intestine)
*Absorption (chemistry), diffusion of particles of gas or liquid into liquid or solid materials
*Absorption (skin), a route by which ...
of natural
kenaf
Kenaf tymology: Persian ''Hibiscus cannabinus'', is a plant in the family Malvaceae also called Deccan hemp and Java jute. ''Hibiscus cannabinus'' is in the genus ''Hibiscus'' and is native to Africa, though its exact origin is unknown. The name ...
fibers. Publisher: Elsevier. Impact Factor (2019): 2.440
* ''Lighting Research & Technology'': This journal covers all aspects of light and lighting, including the human response to light,
light generation,
light control
Light or visible light is electromagnetic radiation that can be perceived by the human eye. Visible light is usually defined as having wavelengths in the range of 400–700 nanometres (nm), corresponding to frequencies of 750–420 ter ...
, light measurement, lighting design equipment,
daylighting, energy efficiency of lighting design, and sustainability. The journal's most cited articles cover topics such as light as a circadian stimulus for architectural lighting, human perceptions of color rendition, and the influence of color gamut size and shape on color preference. Publisher:
SAGE Publishing
SAGE Publishing, formerly SAGE Publications, is an American independent publishing company founded in 1965 in New York by Sara Miller McCune and now based in Newbury Park, California.
It publishes more than 1,000 journals, more than 800 books ...
. Impact Factor (2019): 2.226
See also
*
Architectural engineering
Architectural engineers apply and theoretical knowledge to the engineering design of buildings and building systems. The goal is to engineer high performance buildings that are sustainable, economically viable and ensure the safety health.
Archi ...
*
Architectural Institute of Japan
The Architectural Institute of Japan, or AIJ, is a Japanese professional body for architects, building engineers, and researchers in architecture.
The institute was founded in 1886 as an institute for architects. It was renamed the Architectural ...
*
Architecture
Architecture is the art and technique of designing and building, as distinguished from the skills associated with construction. It is both the process and the product of sketching, conceiving, planning, designing, and constructing building ...
*
ASHRAE
The American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE ) is an American professional association seeking to advance heating, ventilation, air conditioning and refrigeration
The term refrigeration refers to the ...
*
Building enclosure commissioning Building Enclosure Commissioning (BECx) (sometimes 'envelope' is used instead of 'enclosure') is a strict quality-focused process wherein the energy performance of a facility, system or assembly is evaluated and verified against defined objectives a ...
*
Central Building Research Institute, India
*
Galvanic corrosion
Galvanic corrosion (also called bimetallic corrosion or dissimilar metal corrosion) is an electrochemical process in which one metal corrodes preferentially when it is in electrical contact with another, in the presence of an electrolyte. A sim ...
*
Kansas Building Science Institute
*
National Institute of Building Sciences
The National Institute of Building Sciences is a non-profit, non-governmental organization that brings together representatives of government, the professions, industry, labor and consumer interests, and regulatory agencies to focus on the identif ...
*
Passive House
"Passive house" (german: Passivhaus) is a voluntary standard for energy efficiency in a building, which reduces the building's ecological footprint. It results in ultra-low energy buildings that require little energy for space heating or coo ...
*
Seismic analysis
Seismic analysis is a subset of structural analysis and is the calculation of the response of a building (or nonbuilding) structure to earthquakes. It is part of the process of structural design, earthquake engineering or structural assessme ...
*
Vapor barrier
A vapor barrier (or vapour barrier) is any material used for damp proofing, typically a plastic or foil sheet, that resists diffusion of moisture through the wall, floor, ceiling, or roof assemblies of buildings and of packaging to prevent inter ...
*
sustainable_refurbishment
References
{{DEFAULTSORT:Building Science
Building engineering
Science
Science is a systematic endeavor that builds and organizes knowledge in the form of testable explanations and predictions about the universe.
Science may be as old as the human species, and some of the earliest archeological evidence for ...