IF ERRORLEVEL (Windows Command)

COMMAND.COM is the default command-line interpreter for MS-DOS, Windows 95, Windows 98 and Windows Me. In the case of DOS, it is the default user interface as well. It has an additional role as the usual first program run after boot (init process), hence being responsible for setting up the system by running the AUTOEXEC.BAT configuration file, and being the ancestor of all processes.

COMMAND.COM's successor on OS/2 and Windows NT systems is cmd.exe, although COMMAND.COM is available in virtual DOS machines on IA-32 versions of those operating systems as well.

The filename was also used by (DCP), an MS-DOS derivative by the former East German VEB Robotron.

The compatible command processor under FreeDOS is sometimes also named FreeCom.

COMMAND.COM is a DOS program. Programs launched from COMMAND.COM are DOS programs that use the DOS API to communicate with the disk operating system.

Operating modes

As a shell, COMMAND.COM has two distinct modes of operation. The first is interactive mode, in which the user types commands which are then executed immediately. The second is batch mode, which executes a predefined sequence of commands stored as a text file with the .BAT extension.

Internal commands

Internal commands are commands stored directly inside the COMMAND.COM binary. Thus, they are always available but can only be executed directly from the command interpreter.

All commands are executed after the key is pressed at the end of the line. COMMAND.COM is not case-sensitive, meaning commands can be typed in any mixture of upper and lower case.

; BREAK: Controls the handling of program interruption with or .
; CHCP: Displays or changes the current system code page.
; CHDIR, CD: Changes the current working directory or displays the current directory.
; CLS: Clears the screen.
; COPY: Copies one file to another (if the destination file already exists, MS-DOS asks whether to replace it). (See also XCOPY, an external command that could also copy directory trees).
; CTTY: Defines the device to use for input and output.
; DATE: Display and set the date of the system.
; DEL, ERASE: Deletes a file. When used on a directory, deletes all files inside the directory only. In comparison, the external command DELTREE deletes all subdirectories and files inside a directory as well as the directory itself.
; DIR: Lists the files in the specified directory.
; ECHO: Toggles whether text is displayed () or not (). Also displays text on the screen ().
; EXIT: Exits from COMMAND.COM and returns to the program which launched it.
; LFNFOR: Enables or disables the return of long filenames by the FOR command. (Windows 9x).
; LOADHIGH, LH: Loads a program into upper memory ( in DR DOS).
; LOCK: Enables external programs to perform low-level disk access to a volume. ( MS-DOS 7.1 and Windows 9x only)
; MKDIR, MD: Creates a new directory.
; PATH: Displays or changes the value of the PATH environment variable which controls the places where COMMAND.COM will search for executable files.
; PROMPT: Displays or change the value of the PROMPT environment variable which controls the appearance of the prompt.
; RENAME, REN: Renames a file or directory.
; RMDIR, RD: Removes an empty directory.
; SET: Sets the value of an environment variable; without arguments, shows all defined environment variables.
; TIME: Display and set the time of the system.
; TRUENAME: Display the fully expanded physical name of a file, resolving ASSIGN, JOIN and SUBST logical filesystem mappings.
; TYPE: Display the content of a file on the console.
; UNLOCK: Disables low-level disk access. (MS-DOS 7.1 and Windows 9x only)
; VER: Displays the version of the operating system.
; VERIFY: Enable or disable verification of writing for files.
; VOL:Shows information about a volume.

Batch file commands

Control structures are mostly used inside batch files, although they can also be used interactively.

; :''label'': Defines a target for GOTO.
; CALL: Executes another batch file and returns to the old one and continues.
; FOR: Iteration: repeats a command for each out of a specified set of files.
; GOTO: Moves execution to a specified label. Labels are specified at the beginning of a line, with a colon ().
; IF: Conditional statement, allows branching of the program execution.
; PAUSE: Halts execution of the program and displays a message asking the user to press any key to continue.
; REM: comment: any text following this command is ignored.
; SHIFT: Replaces each of the replacement parameters with the subsequent one (e.g. with , with , etc.).

IF command

On exit, all external commands submit a return code (a value between 0 and 255) to the calling program. Most programs have a certain convention for their return codes (for instance, 0 for a successful execution).

If a program was invoked by COMMAND.COM, the internal IF command with its ERRORLEVEL conditional can be used to test on error conditions of the last invoked external program.

Under COMMAND.COM, internal commands do not establish a new value.

Variables

Batch files for COMMAND.COM can have four kinds of variables:
* Environment variables: These have the form and are associated with values with the SET statement. Before DOS 3 COMMAND.COM will only expand environment variables in batch mode; that is, not interactively at the command prompt.
* Replacement parameters: These have the form , ..., and initially contain the command name and the first nine command line parameters passed to the script (e.g., if the invoking command was , then is "myscript.bat", is "John" and is "Doe"). The parameters to the right of the ninth can be mapped into range by using the SHIFT statement.
* Loop variables: Used in loops, they have the format when run in batch files. These variables are defined solely within a specific FOR statement, and iterate over a certain set of values defined in that FOR statement.
* Under Novell DOS 7, OpenDOS 7.01, DR-DOS 7.02 and higher, COMMAND.COM also supports a number of system information variables, a feature earlier found in 4DOS 3.00 and higher as well as in Multiuser DOS, although most of the supported variable names differ.

Redirection, piping, and chaining

Because DOS is a single-tasking operating system, piping is achieved by running commands sequentially, redirecting to and from a temporary file. COMMAND.COM makes no provision for redirecting the standard error channel.

; ''command'' < ''filename'' : Redirect standard input from a file or device
; ''command'' > ''filename'' : Redirect standard output, overwriting target file if it exists.
; ''command'' >> ''filename'' : Redirect standard output, appending to target file if it exists.
; ''command1'' , ''command2'' : Pipe standard output from ''command1'' to standard input of ''command2''
; ''command1'' ¶ ''command2'' :
: Commands separated by ASCII-20 (¶, invoked by ) are executed in sequence (chaining of commands). In other words, first ''command1'' is executed until termination, then ''command2''. This is an undocumented feature in COMMAND.COM of MS-DOS/ PC DOS 5.0 and higher. It is also supported by COMMAND.COM of the Windows NT family as well as by DR-DOS 7.07. All versions of DR-DOS COMMAND.COM already supported a similar internal function utilizing an exclamation mark (!) instead (a feature originally derived from Concurrent DOS and Multiuser DOS) - however, in the single-user line this feature was only available internally (in built-in startup scripts like "!DATE!TIME") and indirectly through DOSKEY's $T parameter to avoid problems with ! as a valid filename character. 4DOS supports a configurable command line separator (4DOS.INI CommandSep= or SETDOS /C), which defaults to ^. COMMAND.COM in newer versions of Windows NT also supports an separator for compatibility with the cmd syntax in OS/2 and the Windows NT family. (cmd, however, does not support the ¶ separator.)

Limitations

The command line length in interactive mode is limited to 126 characters.

In popular culture

The message "Loading COMMAND.COM" can be seen on a HUD view of the Terminator and the internal viewport of RoboCop when he reboots.

In the CGI children's TV series '' ReBoot'', which takes place inside computers, the leader of a system (the equivalent of a city) is called the COMMAND.COM.

See also

* (starts the command processor as the first process)
* SHELL (CONFIG.SYS directive)
(to override default command processor)
* COMSPEC (environment variable)
(set by COMMAND.COM to reload transient portion of itself)
* CMDLINE (environment variable)
(set by COMMAND.COM to pass long command lines to external programs)
* (third-party replacement command processors)
* DOSSHELL / ViewMAX
(alternative DOS shells)

* List of DOS commands
* Comparison of command shells
* (have similar command processors not named COMMAND.COM)
* PC-MOS/386
(has a similar command processor also named COMMAND.COM)
* Transient Program Area (TPA)
(area available for use either by the running application or the transient portion of COMMAND.COM)
* SpartaDOS X
(a similar implementation for Atari computers)

References

Further reading

*
*
*
*

External links

* – Source code to COMMAND.COM version 2.11 released by Microsoft as part of MS-DOS 2.0
* – Source code to COMMAND.COM version 1.17 released by Microsoft as part of MS-DOS 1.25

FreeCom
– COMMAND.COM implementation of FreeDOS

{{DOS system files

Command shells
DOS command shells
Windows command shells
Scripting languages
DOS files
Windows files
External DOS commands
MSX-DOS