IDA71 For Stub

The Soviet, later Russian IDA71 military and naval rebreather is an oxygen rebreather intended for use by naval and military divers including Russian commando frogmen. As supplied it is in a plain backpack harness with no buoyancy aid. The casing is pressed aluminium with a hinged cover. It has a small optional nitrox cylinder which can be clipped on its outside to convert it to nitrox mode. It contains one oxygen cylinder and two absorbent canisters. In the bottom of its casing is an empty space which is intended for an underwater communications set.

Here, "up", "back", etc. refer to a man wearing the set standing on land.

The casing is thinner towards the lower end, to reduce drag.

On the front of the harness of the navy frogman version there is a projecting metal plate intended to carry a limpet mine. The front of the harness is a tough rubber "apron".

The loop of each breathing tube can be strapped down to the shoulder to keep it under control to stop it from catching on things or being easily grabbed from behind.

On each side of the casing is a small clip to fasten a parachute to.

Operating modes

The IDA-71 can be used as an oxygen rebreather, or with the addition of an external cylinder, as a nitrox rebreather, which converts between nitrox and oxygen automatically by a pressure activated valve on the nitrox attachment.

It can run as an ordinary diving rebreather. Or it can be run with one of its two absorbent canisters filled with potassium superoxide, which gives off oxygen as it absorbs carbon dioxide: 4KO₂ + 2CO₂ = 2K₂CO₃ + 3O₂; in this mode the oxygen cylinder is a bailout, or to fill and flush the circuit at the start of the dive. This mode gives the set more duration underwater, but is dangerous and not to be risked by civilians because of the explosively hot reaction that happens if water gets on the potassium superoxide; whereas ordinary modern diver's rebreather absorbents have been designed to avoid producing a caustic solution (commonly called "cocktail") if they get wet. Tests at the United States Navy Experimental Diving Unit in Panama City, Florida showed that the IDA71 could give significantly longer dive time with superoxide in one of the canisters than without.

For many years the IDA71 and similar have been a standard Russian frogman's and naval work diver's breathing set. The "71" in its name may be the year that it was designed, like with the numbers in the names of the AK series of Russian rifles. The name IDA comes from russian: Изолирующий дыхательный аппарат ( translit. izoliruyushchiy dykhatel'nyy apparat, literally ''Insulating/Isolating Breathing Apparatus''). Other name is ''Individual Breathing Apparatus'' (russian: Индивидуальний дыхательный аппарат, translit. Individualniy Dykhatelniy Apparat).

In its original Russian mode as an oxygen rebreather, its dive duration is said to be 4 hours. Filling both canisters with soda lime and putting a second oxygen cylinder in the empty space at the bottom, might increase its dive duration to 8 hours.

A number of IDA71's have found their way out of the ex-USSR to Europe and America, where recreational divers have added a wing buoyancy compensator an
converted them
into manually controlled closed circuit rebreathers.

Gallery

File:IDA-71 mask, DSV and breathing hoses P5167748.JPG, IDA-71 mask, DSV and breathing hoses
File:IDA-71 DSV P5167749.JPG, IDA-71 dive/surface valve
File:IDA-71 full face mask and DSV P5167752.JPG, IDA-71 full face mask and DSV
File:IDA-71 full face mask P5167753.JPG, IDA-71 full face mask
File:IDA-71 transport bag P5167755.JPG, IDA-71 transport bag
File:IDA-71 transport bag P5167756.JPG, IDA-71 transport bag
File:IDA-71 external Nitrox set P5167759.JPG, IDA-71 external nitrox cylinder with regulator hoses and changeover valve
File:IDA-71 external Nitrox set P5167760.JPG, IDA-71 external nitrox cylinder with regulator hoses and changeover valve
File:IDA-71 Integrated cylinder valve and regulator of external nitrox set P5167762.JPG, IDA-71 Integrated cylinder valve and regulator of external nitrox set
File:IDA 71 rebreather and harness P5167763.JPG, IDA 71 rebreather and harness
File:IDA-71 front view P5167767.JPG, IDA-71 rebreather top/front end showing ADV in the middle
File:IDA-71 front view P5167768.JPG, Front end of IDA-71
File:IDA-71 in casing P5167769.JPG, Top/back view of IDA 71 in its casing
File:IDA-71 with breathing hoses and FFM P5167770.JPG, IDA-71 rebreather with breathing hoses and full face mask fitted. top view.
File:IDA-71 with breathing hoses and FFM P5167772.JPG, IDA-71 rebreather with breathing hoses and full face mask fitted
File:IDA-71 with breathing hoses and FFM P5167774.JPG, IDA-71 rebreather with breathing hoses and full face mask fitted
File:IDA-71 with lid of casing opened showing interior P5167775.JPG, IDA-71 with lid of casing opened showing interior with counterlung, scrubber canisters and oxygen supply cylinder and regulator
File:IDA-71 with lid of casing opened showing interior P5167777.JPG, IDA-71 with lid of casing opened showing interior with counterlung, scrubber canisters and oxygen supply cylinder and regulator
File:IDA-71 with lid of casing opened showing interior P5167779.JPG, IDA-71 with lid of casing opened showing interior with counterlung, scrubber canisters and oxygen supply cylinder and regulator
File:IDA-71 oxygen cylinderP5167780.JPG, Close up of oxygen supply cylinder and regulator in an IDA-71 rebreather
File:IDA-71 oxygen regulator P5167781.JPG, Close up of oxygen supply regulator in an IDA-71 rebreather
File:IDA-71 external Nitrox connection point P5167783.JPG, IDA-71 external Nitrox connection point
File:IDA-71 with lid of casing opened showing interior P5167785.JPG, IDA-71 with lid of casing opened showing interior with counterlung, scrubber canisters and oxygen supply cylinder and regulator, and external nitrox supply plugged in
File:IDA-71 nitrox changeover valve P5167789.JPG, Closeup of the pressure activated nitrox changeover valve mounted on the external nitrox supply cylinder for an IDA-71 rebreather
File:IDA-71 scrubber canister filling port P5167787.JPG, Detail of the scrubber canister of an IDA-71 showing the filling port for absorbent medium
File:AA_IDA71 fullfacemask.jpg, Another type of fullface mask sometimes supplied with an IDA71 rebreather

References

External links

*http://www.therebreathersite.nl/Zuurstofrebreathers/Russian/ida-71.htm information & links
*http://www.therebreathersite.nl/Zuurstofrebreathers/Russian/photos_ida-71.htm pictures & links
*https://web.archive.org/web/20120314061648/http://www.smrebreathers.ru/rebreathers/rebreather/time_before_time/boets2.jpg Frogman with IDA71 and APS underwater rifle

:: Russian frogman displaying on quayside at Sevastopol on Russian Navy Day with IDA71's with fullface masks with oval windows like an ordinary diving mask's, and AK47's or similar.
Images of Russian frogmen on land
*http://sport.freepage.de/rsdas/ Swiss technical Info about IDA71 with pictures
*http://www.bleilatschen.de/idamania7.htm German Information, use of the device, field report
Russian website about rebreathers
->

{{Underwater diving, divequ

IDA71
Military equipment of the Soviet Union