The IBM 1711 Data Converter was part of the

IBM 1710 The IBM 1710 was a process control system that IBM introduced in March 1961. It used either a 1620 I or a 1620 II Computer and specialized I/O devices (e.g., IBM 1711 analog-to-digital converter and digital-to-analog converter, IBM 1712 discre ...

process control computer. The 1711 contained an

analog-to-digital converter In electronics, an analog-to-digital converter (ADC, A/D, or A-to-D) is a system that converts an analog signal, such as a sound picked up by a microphone or light entering a digital camera, into a digital signal. An ADC may also provide ...

that accepted signals from the

IBM 1712 The IBM 1712 Multiplexer and Terminal Unit was part of the IBM 1710 process control computer. The Terminal Unit provided the physical connections between factory wiring and the computer. The 1712 could support up to 300 separate wire pairs. Signal ...

Multiplexer and Terminal Unit that were between -50

milli ''Milli'' (symbol m) is a unit prefix in the metric system denoting a factor of one thousandth (10−3). Proposed in 1793, and adopted in 1795, the prefix comes from the Latin , meaning ''one thousand'' (the Latin plural is ). Since 1960, the pre ...

volt The volt (symbol: V) is the unit of electric potential, electric potential difference (voltage), and electromotive force in the International System of Units (SI). It is named after the Italian physicist Alessandro Volta (1745–1827). Defin ...

s and +50 millivolts and converted them into signed, four decimal digit numbers that were stored in the 1710s

core memory Core or cores may refer to: Science and technology * Core (anatomy), everything except the appendages * Core (manufacturing), used in casting and molding * Core (optical fiber), the signal-carrying portion of an optical fiber * Core, the centra ...

. The 1711 featured a

real-time clock A real-time clock (RTC) is an electronic device (most often in the form of an integrated circuit) that measures the passage of time. Although the term often refers to the devices in personal computers, servers and embedded systems, RTCs are pr ...

that could place the current hour and minute into storage, again as a 4 digit number. On the 1711's control panel, there was a bank of seven decimal digit manual entry switches that could be read by the computer. The 1711 also contained address circuitry for the IBM 1712 Multiplexer. Optional 1711 features included contact sense, contact operate, analog output,

interrupt In digital computers, an interrupt (sometimes referred to as a trap) is a request for the processor to ''interrupt'' currently executing code (when permitted), so that the event can be processed in a timely manner. If the request is accepted, ...

, and process branch indicators. While all this and more would fit comfortably on a single IC today, the IBM 1711 occupied a three section rack cabinet.

References

{{DEFAULTSORT:Ibm 1711 1711 Computer real-time clocks

See also

References