HOME

TheInfoList



OR:

Hacker-Craft is the name given to boats built by The Hacker Boat Co. It is an American company, founded in Detroit, Michigan in 1908 by John Ludwig Hacker (1877–1961, known as John L. Hacker or just "John L.") and is the oldest constructor of wooden motor boats in the world. The company moved operations to New York State in the 1970s and continues to produce hand-built boats. Hacker was a
naval architect This is the top category for all articles related to architecture and its practitioners. {{Commons category, Architecture occupations Design occupations Occupations ...
and American motorboat designer. His major design and engineering accomplishments include the invention of the "V"-hull design and the floating biplane for the Wright brothers. The company was known for its runabouts, utilities, commuters, and tenders.


John L. Hacker, the early years

Hacker was born in Detroit, Michigan on May 24, 1877. For four years, while working at his father's business as a bookkeeper, he attended night school and took a correspondence course in order to become an accredited marine designer. Once qualified (at the age of 22) he set about solving a number of problems that inhibited speed and performance in motor boats. Pleasure boats of the 1900 era were narrow, round bottomed launches that plowed through the water instead of planing over it as boats do nowadays. Hacker's first major task in boat design was to try to solve the problem of "squatting", which occurred with all the canoe-stern shaped powerboats of the 1900s. His theory was that if his boats were going to go fast, they would have to "plane" rather than plow through the water, but the tendency to plane was considered an unsafe mode that was to be avoided. Nonetheless, he built a test craft to prove his new theories—a runabout. The boat's propeller and rudder were mounted under the transom and a strut was used to position the propeller shaft. The boat also featured Hacker's revolutionary "V"-hull design, which produced stunning speed and efficiency at low horsepower. In 1904, he designed ''Au Revoir'', the fastest boat in the world at the time, and on August 12, 1908, building on this success, he founded the Hacker Boat Company in Detroit, upon purchasing and renaming an existing firm, the Detroit Launch and Power Company. Coincidentally, this was the same day on which the first ever Model T Ford automobile was produced by his friend, Henry Ford. Hacker's designs led to many advances that today's boat owners take for granted. His combination of design flair and engineering brilliance led him to create the shape and style that was to become the signature look of American speedboats. The names of his designs include ''Pardon Me'', the ''Minute Man'', ''Thunderbird'', ''El Lagarto'', ''Bootlegger'', ''Peerless'', ''Dolphin'', ''Kitty Hawk'', ''Tempo VI'', the ''Belle Isle Bear Cats'', ''Lockpat II'', and ''My Sweetie''.


The birth of speed

In 1911, Hacker designed and installed two floats on the Wright Brothers' biplane so that it could take off and land on water. This was the first use of twin floats on an aircraft. In the same year he designed ''Kitty Hawk'', the first successful step hydroplane that exceeded the then-unthinkable speed of over and was then the fastest boat in the world. There followed a succession of ''Kitty Hawks'', each building on the success of its predecessor and in the process breaking four sea-speed records. In 1914, Hacker moved to Detroit and the Hacker Boat Company opened at 323 Crane Avenue. His runabout designs for Gregory's Belle Isle Boat & Engine Company were soon to bring success to the firm. The boats, called ''Belle Isle Bear Cats'', proved popular with prominent owners like J.W. Packard and Henry Ford. The company was thriving and in 1921, Hacker decided it was time to open a satellite facility in Mount Clemens, Michigan. Two years later, he moved the entire boat building operation from Detroit to Mount Clemens.


Hacker Boat Company flourishes

The boat works on the Clinton River in Mount Clemens continued to expand, and by 1928 they provided of floor space for the handcrafting of fine mahogany runabouts. That year the influential "Pageant of Progress" reported that the Hacker Boat Company employed sixty-eight men with demand growing rapidly. Sales for that year were $450,000 (about $5,000,000 2009 USD). Along with a handful of others, such as Gar Woods and Chris-Crafts, Hacker's gleaming mahogany runabouts captured the public imagination with their elegant design and breakneck speed and in the process quickly became the must-have play thing for the rich and famous. In 1930 the King of Siam ordered a custom-built Landau-top runabout powered with an Packard engine. Only four authorized dealers offered Hacker boats to the public during this period. The company did most of its business through factory direct orders from the customer, and excelled in custom-built craft.


1930–1960

The Great Depression had a devastating effect on the pleasure-boat market. In 1935 Hacker took on a business partner, John Mcready, who quickly assumed day-to-day control of the company. Meanwhile, Hacker focused on designing boats in what was to become his golden period: he was responsible for a remarkable number of racing winners including ''El Lagarto'' (which won the Gold Cup in 1933, 1934 and 1935), ''Scotty'', ''Scotty Too'', ''My Sweetie'', ''Miss Pepsi'' —all record breakers. In all, Hacker was responsible for over twenty water speed records, five Gold Cup winners, four President's Race winners and numerous other speed trials and racing victories. In Mount Clemens, Hacker Boat Company rebounded from the Depression with popular "utility" Hacker-Craft runabouts priced for the ordinary consumer. In 1935, the utility could be purchased for $975 ($13,000 2009 USD). In 1939 Hacker was commissioned by property tycoon George Whitell to build what was to be one of his masterpieces and is now a national historic treasure, a commuter called ''Thunderbird'', which was commemorated on a postage stamp in 2007 by the U.S. Postal Service . In 1952, Hacker Boat was awarded a government contract for the construction of 25 ocean-going picket boats for the U.S. Navy and 112 crash boats, sedan utility boats, and target boats. Hacker's designs included patrol boats, air-sea rescue boats, and cruisers.


Hacker Boat Company revitalized, 1959-1983

In 1959 William Morgan of Morgan Marine, a boat-builder from Silver Bay, on Lake George, New York, acquired the Hacker-Craft name with the aim of revitalizing the company's historic legacy. Morgan Marine made significant structural and engineering modifications. The use of new technologies, unavailable to Hacker, allowed for improvements of the boats in a few subtle but important ways. Where Hacker had used engines, Morgan Marine was able to power these hulls with or ''Crusader'' engines that could exceed 50 miles per hour. To accommodate these improved engines, Morgan Marine had to make the supports stronger than those used in the original designs. Morgan's biggest accomplishment, however, was improving the handling of the Hacker Crafts. If the old Hackers were run at top speeds, the bow could rise and block the driver's view. By reworking the bottom design, Morgan ensured that the boat would remain more level in the water.


Modern Classics: 1983 - Present

In 1983, (the relaunch of the "Modern Classics" and reset of hull numbers starting at 000), significant additional improvements were made to modernize the boats while retaining their classic look. Many of the original jigs had been lost, and, where necessary, they made new sand castings for the hardware. While retaining most of the traditional craftsmanship, Morgan made several significant improvements over the old plans, as concessions to the advancement of technology: dual exhausts, rather than the original single exhaust, for enhanced engine performance; the use of stainless steel fittings and hardware throughout so that pitting was no longer a problem; state-of-the-art epoxy encapsulation and bonding techniques; triple planked bottoms completely encased in epoxy; double planked sides and deck saturated in epoxy; 25% more frames; double the number of floor timbers; up to 18 coats of varnish; the use of renewable-resourced Honduras mahogany; new improved steering for more maneuverability; and laminated windshields with either blue or green tints. The product line consisted of three models: 26 foot Gentleman's Racer; 26 foot and 30 foot triple-cockpit Runabout. Each could be customized to the buyer’s wishes. In 2004 Robert Wagemann bought the company from William Morgan. In 2008 George Badcock's Erin Investments acquired a majority interest in the company from Robert Wagemann. Subsequently, the company opened a 32,000-square-foot production facility in Ticonderoga, moving production there from Silver Bay in order to increase capacity. In 2011 Erin Investments attained complete ownership of the company. In addition to the new production facility, the company's headquarters campus on Lake George, also the site of a full service marina, was upgraded, with a new showroom capable of displaying four boats. The headquarters offices and all storage and service buildings were repaired/refurbished. The campus was landscaped and parking areas upgraded. In 2011 Hacker-Craft were seen in TV and catalog shoots for Marks & Spencer (UK), Tommy Hilfiger and Nautica. In 2011 the custom designed Neiman Marcus Edition Hacker-Craft was selected as a “fantasy gift” in the legendary Neiman Marcus Christmas Book catalog. In 2012 a partnership with Tommy Bahama resulted in a custom designed model, the Tommy Bahama Edition Hacker-Craft (TBE). In 2015 the company introduced a limousine yacht tender, and appointed the Sierra Boat Company, on Lake Tahoe, Nevada, and Wawasee Boat Company, of Syracuse, Indiana, as an authorized representative. In 2017 the company appointed Thailand-based Classic Boats Lifestyle, Ltd. (CBL) as an official stocking dealer. In 2019, a Hacker Craft boat appeared in a season two episode of Netflix's Ozark. In 2021 the company appointed Maryland-based Tomes Landing Marina and Wisconsin-based Pandora Boat Company as official stocking dealers. In 2021 the company relocated its corporate offices, production and restoration operations from Ticonderoga to Queensbury, NY, to better attract new employees and be more convenient to prospective customers to view and discuss purchasing a Hacker-Craft. The new space was 40% larger than the former factory, to better enable the building of custom boats and the rapidly growing restoration business. Plans include building a showroom on the site. In conjunction with the move to the new location, the company introduced a new line of models, the Evolution Collection. The line includes the 37’ 5” Commuter, the 30’-35’ Center Console and the 40’ Monaco; each customizable. The Evolution Collection transformed Hacker from producing solely traditional designs to also building models with an entirely new look for the brand. The line’s three unique models defined a new era for Hacker and helped the company enter new markets and attract buyers looking for innovative designs and cutting-edge technology, yet with the panache of the Hacker-Craft brand.


References


Further reading

* * * * * * * * * * * * *


External links

*{{official, https://www.hackerboat.com/
The Mariners' Museum, John L. Hacker Collection
��the largest single archive of material relating to John Hacker and Hacker-Craft Motorboats American shipbuilders Manufacturing companies established in 1908 Privately held companies based in New York (state) 1908 establishments in Michigan