The Hughes 36 is a Canadian

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by

William H. Tripp Jr. William H. Tripp Jr (1920–1971) was an Americans, American naval architect who created many popular wooden and later fiberglass sailboat designs. Tripp used the diminutive, ''Bill'', as his usual first name. Life Tripp was a native of Long Isl ...

and first built in 1971. The Hughes 36 is a development of the

Columbia 34 Mark II The Columbia 34 Mark II is an American sailboat that was designed by William H. Tripp Jr. as a coastal cruising sailboat and first built in 1970. The Columbia 34 Mark II's hull molds were later used to develop the Coronado 35 and also the Hu ...

hull design, being built using tooling and moulds acquired from

Columbia Yachts Columbia Yachts is a US manufacturer of sailboats, with offices and production facilities in Southern California. History Richard “Dick” Valdes and Maurice V. Threinen founded Glass Laminates, a fiberglass contract company, in 1958. Amo ...

. It is related to the

Coronado 35 The Coronado 35 is an American sailboat that was designed by William H. Tripp Jr. as a cruiser and first built in 1971. The Coronado 35 design was developed into the Portman 36 in 1978 and later into the Watkins 36 and the Watkins 36C. Devel ...

design. The design was developed into the

Hughes-Columbia 36 The Hughes-Columbia 36 is a Canadian sailboat that was designed by William H. Tripp Jr. and first built in 1979. The Hughes-Columbia 36 is a development of Hughes 36, which is in turn derived from the Columbia 34 Mark II hull design, built u ...

in 1979.

Production

The design was built by Hughes Boat Works in

Canada Canada is a country in North America. Its ten provinces and three territories extend from the Atlantic Ocean to the Pacific Ocean and northward into the Arctic Ocean, covering over , making it the world's second-largest country by tot ...

, but it is now out of production.

Design

The Hughes 36 is a recreational

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wat ...

, built predominantly of

fibreglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...

, with wood trim. It has a

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, ...

rig or optional

ketch A ketch is a two- masted sailboat whose mainmast is taller than the mizzen mast (or aft-mast), and whose mizzen mast is stepped forward of the rudder post. The mizzen mast stepped forward of the rudder post is what distinguishes the ketch fr ...

rig, a centre-cockpit, a spooned

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a raised

transom Transom may refer to: * Transom (architecture), a bar of wood or stone across the top of a door or window, or the window above such a bar * Transom (nautical), that part of the stern of a vessel where the two sides of its hull meet * Operation Tran ...

, a

skeg A skeg (or skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line. The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard."A small fin f ...

-mounted spade-type/transom-hung

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...

controlled by a

wheel A wheel is a circular component that is intended to rotate on an axle Bearing (mechanical), bearing. The wheel is one of the key components of the wheel and axle which is one of the Simple machine, six simple machines. Wheels, in conjunction wi ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...

. It displaces and carries of ballast. The boat has a draft of with the standard keel fitted. The design has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to-tro ...

of .

References

{{Hughes Boat Works Keelboats 1970s sailboat type designs Sailing yachts Sailboat type designs by William H. Tripp Jr. Sailboat types built by Hughes Boat Works

Production

Design

See also

References