Hess Polytope

In 7-dimensional geometry, the 3₂₁ polytope is a uniform 7-polytope, constructed within the symmetry of the E₇ group. It was discovered by Thorold Gosset, published in his 1900 paper. He called it an 7-ic semi-regular figure.Gosset, 1900

Its Coxeter symbol is 3₂₁, describing its bifurcating Coxeter-Dynkin diagram, with a single ring on the end of one of the 3-node sequences.

The rectified 3₂₁ is constructed by points at the mid-edges of the 3₂₁. The birectified 3₂₁ is constructed by points at the triangle face centers of the 3₂₁. The trirectified 3₂₁ is constructed by points at the tetrahedral centers of the 3₂₁, and is the same as the rectified 1₃₂.

These polytopes are part of a family of 127 (2⁷-1) convex uniform polytopes in 7-dimensions, made of uniform 6-polytope facets and vertex figures, defined by all permutations of rings in this Coxeter-Dynkin diagram: .

3₂₁ polytope

In 7-dimensional geometry, the 3₂₁ is a uniform polytope. It has 56 vertices, and 702 facets: 126 3₁₁ and 576 6-simplexes.

For visualization this 7-dimensional polytope is often displayed in a special skewed orthographic projection direction that fits its 56 vertices within an 18-gonal regular polygon (called a Petrie polygon). Its 756 edges are drawn between 3 rings of 18 vertices, and 2 vertices in the center. Specific higher elements (faces, cells, etc.) can also be extracted and drawn on this projection.

The 1-skeleton of the 3₂₁ polytope is the Gosset graph.

This polytope, along with the 7-simplex, can tessellate 7-dimensional space, represented by 3₃₁ and Coxeter-Dynkin diagram: .

Alternate names

*It is also called the Hess polytope for Edmund Hess who first discovered it.
*It was enumerated by Thorold Gosset in his 1900 paper. He called it an ''7-ic semi-regular figure''.
*E. L. Elte named it V₅₆ (for its 56 vertices) in his 1912 listing of semiregular polytopes.
*H.S.M. Coxeter called it 3₂₁ due to its bifurcating Coxeter-Dynkin diagram, having 3 branches of length 3, 2, and 1, and having a single ring on the final node of the 3 branch.
* ''Hecatonicosihexa-pentacosiheptacontihexa-exon'' (Acronym Naq) - 126-576 facetted polyexon (Jonathan Bowers)

Coordinates

The 56 vertices can be most simply represented in 8-dimensional space, obtained by the 28 permutations of the coordinates and their opposite:
: ± (-3, -3, 1, 1, 1, 1, 1, 1)

Construction

Its construction is based on the E7 group. Coxeter named it as 3₂₁ by its bifurcating Coxeter-Dynkin diagram, with a single ring on the end of the 3-node sequence.

The facet information can be extracted from its Coxeter-Dynkin diagram, .

Removing the node on the short branch leaves the 6-simplex, .

Removing the node on the end of the 2-length branch leaves the 6-orthoplex in its alternated form: 3₁₁, .

Every simplex facet touches a 6-orthoplex facet, while alternate facets of the orthoplex touch either a simplex or another orthoplex.

The vertex figure is determined by removing the ringed node and ringing the neighboring node. This makes 2₂₁ polytope, .

Seen in a configuration matrix, the element counts can be derived by mirror removal and ratios of Coxeter group orders.

Images

Related polytopes

The 3₂₁ is fifth in a dimensional series of semiregular polytopes. Each progressive uniform polytope is constructed vertex figure of the previous polytope. Thorold Gosset identified this series in 1900 as containing all regular polytope facets, containing all simplexes and orthoplexes.

It is in a dimensional series of uniform polytopes and honeycombs, expressed by Coxeter as 3_k1 series. (A degenerate 4-dimensional case exists as 3-sphere tiling, a tetrahedral hosohedron.)

Rectified 3₂₁ polytope

Alternate names

* Rectified hecatonicosihexa-pentacosiheptacontihexa-exon as a rectified 126-576 facetted polyexon (acronym ranq) (Jonathan Bowers)

Construction

Its construction is based on the E7 group. Coxeter named it as 3₂₁ by its bifurcating Coxeter-Dynkin diagram, with a single node on the end of the 3-node sequence.

The facet information can be extracted from its Coxeter-Dynkin diagram, .

Removing the node on the short branch leaves the 6-simplex, .

Removing the node on the end of the 2-length branch leaves the rectified 6-orthoplex in its alternated form: t₁3₁₁, .

Removing the node on the end of the 3-length branch leaves the 2₂₁, .

The vertex figure is determined by removing the ringed node and ringing the neighboring node. This makes 5-demicube prism, .

Images

Birectified 3₂₁ polytope

Alternate names

* Birectified hecatonicosihexa-pentacosiheptacontihexa-exon as a birectified 126-576 facetted polyexon (acronym branq) (Jonathan Bowers)Klitzing, (o3o3o3o *c3x3o3o - branq)

Construction

Its construction is based on the E7 group. Coxeter named it as 3₂₁ by its bifurcating Coxeter-Dynkin diagram, with a single node on the end of the 3-node sequence.

The facet information can be extracted from its Coxeter-Dynkin diagram, .

Removing the node on the short branch leaves the birectified 6-simplex, .

Removing the node on the end of the 2-length branch leaves the birectified 6-orthoplex in its alternated form: t₂(3₁₁), .

Removing the node on the end of the 3-length branch leaves the rectified 2₂₁ polytope in its alternated form: t₁(2₂₁), .

The vertex figure is determined by removing the ringed node and ringing the neighboring node. This makes rectified 5-cell-triangle duoprism, .

Images

See also

* List of E7 polytopes

Notes

References

* T. Gosset: ''On the Regular and Semi-Regular Figures in Space of n Dimensions'', Messenger of Mathematics, Macmillan, 1900
*
* H.S.M. Coxeter, ''Regular Polytopes'', 3rd Edition, Dover New York, 1973
* Kaleidoscopes: Selected Writings of H.S.M. Coxeter, edited by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication, 1995,

** (Paper 24) H.S.M. Coxeter, ''Regular and Semi-Regular Polytopes III'', ath. Zeit. 200 (1988) 3-45See p342 (figure 3.7c) by Peter mcMullen: (18-gonal node-edge graph of 3₂₁)
* o3o3o3o *c3o3o3x - naq, o3o3o3o *c3o3x3o - ranq, o3o3o3o *c3x3o3o - branq

External links

''Gosset’s Polytopes''
in vZome

{{DEFAULTSORT:3 21 Polytope
7-polytopes