Height is measure of vertical
distance
Distance is a numerical or occasionally qualitative measurement of how far apart objects or points are. In physics or everyday usage, distance may refer to a physical length or an estimation based on other criteria (e.g. "two counties over"). ...
, either vertical extent (how "tall" something or someone is) or
vertical position
Vertical position or vertical location, also known as vertical level or simply level, is a position along a vertical direction above or below a given vertical datum (reference level).
Vertical distance or vertical separation is the distance betwee ...
(how "high" a point is).
For example, "The height of that building is 50 m" or "The height of an airplane in-flight is about 10,000 m".
For example, "Christopher Columbus is 5 foot 2 inches in vertical height."
When the term is used to describe vertical position (of, e.g., an airplane) from
sea level
Mean sea level (MSL, often shortened to sea level) is an average surface level of one or more among Earth's coastal bodies of water from which heights such as elevation may be measured. The global MSL is a type of vertical datuma standardised g ...
, height is more often called ''
altitude
Altitude or height (also sometimes known as depth) is a distance measurement, usually in the vertical or "up" direction, between a reference datum and a point or object. The exact definition and reference datum varies according to the context ...
''.
Furthermore, if the point is attached to the Earth (e.g., a mountain peak), then altitude (height above sea level) is called ''
elevation
The elevation of a geographic location is its height above or below a fixed reference point, most commonly a reference geoid, a mathematical model of the Earth's sea level as an equipotential gravitational surface (see Geodetic datum § Vert ...
''.
In a two-dimensional
Cartesian space
A Cartesian coordinate system (, ) in a plane is a coordinate system that specifies each point uniquely by a pair of numerical coordinates, which are the signed distances to the point from two fixed perpendicular oriented lines, measured in ...
, height is measured along the vertical axis (''y'') between a specific point and another that does not have the same ''y''-value. If both points happen to have the same ''y''-value, then their relative height is zero. In the case of
three-dimensional space
Three-dimensional space (also: 3D space, 3-space or, rarely, tri-dimensional space) is a geometric setting in which three values (called ''parameters'') are required to determine the position (geometry), position of an element (i.e., Point (m ...
, height is measured along the vertical ''z'' axis, describing a distance from (or "above") the ''x-y'' plane.
Etymology
The English-language word ''high'' is derived from
Old English
Old English (, ), or Anglo-Saxon, is the earliest recorded form of the English language, spoken in England and southern and eastern Scotland in the early Middle Ages. It was brought to Great Britain by Anglo-Saxon settlement of Britain, Anglo ...
''hēah'', ultimately from Proto-Germanic *''xauxa-z'', from a
PIE
A pie is a baked dish which is usually made of a pastry dough casing that contains a filling of various sweet or savoury ingredients. Sweet pies may be filled with fruit (as in an apple pie), nuts ( pecan pie), brown sugar ( sugar pie), swe ...
base ''*keuk-''. The derived noun ''height'', also the obsolete forms ''heighth'' and ''highth'', is from Old English ''híehþo'', later ''héahþu'', as it were from Proto-Germanic ''*xaux-iþa''.
In mathematics
In elementary models of space, height may indicate the third
dimension
In physics and mathematics, the dimension of a Space (mathematics), mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any Point (geometry), point within it. Thus, a Line (geometry), lin ...
, the other two being
length
Length is a measure of distance. In the International System of Quantities, length is a quantity with dimension distance. In most systems of measurement a base unit for length is chosen, from which all other units are derived. In the Interna ...
and
width
Length is a measure of distance. In the International System of Quantities, length is a quantity with dimension distance. In most systems of measurement a base unit for length is chosen, from which all other units are derived. In the Interna ...
. Height is normal to the plane formed by the length and width.
Height is also used as a name for some more abstract definitions. These include:
#The
altitude
Altitude or height (also sometimes known as depth) is a distance measurement, usually in the vertical or "up" direction, between a reference datum and a point or object. The exact definition and reference datum varies according to the context ...
of a triangle, which is the length from a vertex of a triangle to the line formed by the opposite side;
#A measurement in a
circular segment
In geometry, a circular segment (symbol: ), also known as a disk segment, is a region of a disk which is "cut off" from the rest of the disk by a secant or a chord. More formally, a circular segment is a region of two-dimensional space that is ...
of the distance from the midpoint of the arc of the circular segment to the midpoint of the line joining the endpoints of the arc (see diagram in
circular segment
In geometry, a circular segment (symbol: ), also known as a disk segment, is a region of a disk which is "cut off" from the rest of the disk by a secant or a chord. More formally, a circular segment is a region of two-dimensional space that is ...
);
#In a
rooted tree
In graph theory, a tree is an undirected graph in which any two vertices are connected by ''exactly one'' path, or equivalently a connected acyclic undirected graph. A forest is an undirected graph in which any two vertices are connected by ''a ...
, the
height
Height is measure of vertical distance, either vertical extent (how "tall" something or someone is) or vertical position (how "high" a point is).
For example, "The height of that building is 50 m" or "The height of an airplane in-flight is abou ...
of a vertex is the length of the longest downward path to a leaf from that vertex;
#In algebraic number theory, a "
height function
A height function is a function that quantifies the complexity of mathematical objects. In Diophantine geometry, height functions quantify the size of solutions to Diophantine equations and are typically functions from a set of points on algebraic ...
" is a measurement related to the
minimal polynomial of an
algebraic number
An algebraic number is a number that is a root of a non-zero polynomial in one variable with integer (or, equivalently, rational) coefficients. For example, the golden ratio, (1 + \sqrt)/2, is an algebraic number, because it is a root of the po ...
; among other uses in
commutative algebra
Commutative algebra, first known as ideal theory, is the branch of algebra that studies commutative rings, their ideals, and modules over such rings. Both algebraic geometry and algebraic number theory build on commutative algebra. Prominent ...
and
representation theory
Representation theory is a branch of mathematics that studies abstract algebraic structures by ''representing'' their elements as linear transformations of vector spaces, and studies modules over these abstract algebraic structures. In essen ...
;
#In
ring theory
In algebra, ring theory is the study of rings— algebraic structures in which addition and multiplication are defined and have similar properties to those operations defined for the integers. Ring theory studies the structure of rings, their re ...
, the
height
Height is measure of vertical distance, either vertical extent (how "tall" something or someone is) or vertical position (how "high" a point is).
For example, "The height of that building is 50 m" or "The height of an airplane in-flight is abou ...
of a
prime ideal
In algebra, a prime ideal is a subset of a ring that shares many important properties of a prime number in the ring of integers. The prime ideals for the integers are the sets that contain all the multiples of a given prime number, together with ...
is the supremum of the lengths of all chains of prime ideals contained in it.
In geosciences
Although height is normally relative to a plane of reference, most measurements of height in the physical world are based upon a zero surface, known as
sea level
Mean sea level (MSL, often shortened to sea level) is an average surface level of one or more among Earth's coastal bodies of water from which heights such as elevation may be measured. The global MSL is a type of vertical datuma standardised g ...
. Both altitude and
elevation
The elevation of a geographic location is its height above or below a fixed reference point, most commonly a reference geoid, a mathematical model of the Earth's sea level as an equipotential gravitational surface (see Geodetic datum § Vert ...
, two synonyms for height, are usually defined as the position of a point above the mean sea level. One can extend the sea-level surface under the continents: naively, one can imagine a lot of narrow canals through the continents. In practice, the sea level under a continent has to be computed from gravity measurements, and slightly different computational methods exist; see
Geodesy, heights.
In addition to vertical position, the vertical extent of geographic landmarks can be defined in terms of
topographic prominence
In topography, prominence (also referred to as autonomous height, relative height, and shoulder drop in US English, and drop or relative height in British English) measures the height of a mountain or hill's summit relative to the lowest contou ...
. For example, the highest mountain (by elevation in reference to sea level) belongs to
Mount Everest
Mount Everest (; Tibetan: ''Chomolungma'' ; ) is Earth's highest mountain above sea level, located in the Mahalangur Himal sub-range of the Himalayas. The China–Nepal border runs across its summit point. Its elevation (snow heig ...
, located on the border of
Nepal
Nepal (; ne, नेपाल ), formerly the Federal Democratic Republic of Nepal ( ne,
सङ्घीय लोकतान्त्रिक गणतन्त्र नेपाल ), is a landlocked country in South Asia. It is mai ...
and
Tibet
Tibet (; ''Böd''; ) is a region in East Asia, covering much of the Tibetan Plateau and spanning about . It is the traditional homeland of the Tibetan people. Also resident on the plateau are some other ethnic groups such as Monpa people, ...
,
China
China, officially the People's Republic of China (PRC), is a country in East Asia. It is the world's most populous country, with a population exceeding 1.4 billion, slightly ahead of India. China spans the equivalent of five time zones and ...
; however the
tallest mountain
This is a list of mountain peaks ordered by their topographic prominence.
Terminology
The prominence of a peak is the minimum height of climb to the summit on any route from a higher peak, or from sea level if there is no higher peak. The lowest ...
, by measurement of apex to base, is
Mauna Kea
Mauna Kea ( or ; ; abbreviation for ''Mauna a Wākea''); is a dormant volcano on the island of Hawaii. Its peak is above sea level, making it the highest point in the state of Hawaii and second-highest peak of an island on Earth. The peak is ...
in
Hawaii
Hawaii ( ; haw, Hawaii or ) is a state in the Western United States, located in the Pacific Ocean about from the U.S. mainland. It is the only U.S. state outside North America, the only state that is an archipelago, and the only stat ...
,
United States
The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territorie ...
.
In geodesy
Geodesists formalize mean sea level (MSL) by means of the
geoid
The geoid () is the shape that the ocean surface would take under the influence of the gravity of Earth, including gravitational attraction and Earth's rotation, if other influences such as winds and tides were absent. This surface is extended ...
, the equipotential surface that best fits MSL. Then various types of height (normal, dynamic, orthometric, etc.) can be defined, based on the assumption of density of topographic masses necessary in the continuation of MSL under the continents.
A purely geometric quantity is the ''
ellipsoidal height
Geodetic coordinates are a type of curvilinear orthogonal coordinate system used in geodesy based on a ''reference ellipsoid''.
They include geodetic latitude (north/south) , ''longitude'' (east/west) , and ellipsoidal height (also known as geod ...
'', reckoned from the surface of a
reference ellipsoid
An Earth ellipsoid or Earth spheroid is a mathematical figure approximating the Earth's form, used as a reference frame for computations in geodesy, astronomy, and the geosciences. Various different ellipsoids have been used as approximations ...
, see
Geodetic system, vertical datum.
In aviation
In aviation terminology, the terms ''height'', ''altitude'', and ''elevation'' are not synonyms. Usually, the altitude of an aircraft is measured from sea level, while its height is measured from ground level. Elevation is also measured from sea level, but is most often regarded as a property of the ground. Thus, elevation plus height can equal altitude, but the term ''altitude'' has several meanings in aviation.
In human culture
Human height
Human height or stature is the distance from the bottom of the feet to the top of the head in a human body, standing erect. It is measured using a stadiometer, in centimetres when using the metric system or SI system, or feet and inches when ...
is one of the areas of study within
anthropometry
Anthropometry () refers to the measurement of the human individual. An early tool of physical anthropology, it has been used for identification, for the purposes of understanding human physical variation, in paleoanthropology and in various atte ...
. While environmental factors have some effect on variations in human height, these influences are insufficient to account for all differences between populations, suggesting that
genetic factors are important for explaining variations between human populations.
The
United Nations
The United Nations (UN) is an intergovernmental organization whose stated purposes are to maintain international peace and international security, security, develop friendly relations among nations, achieve international cooperation, and be ...
uses height (among other
statistics
Statistics (from German language, German: ''wikt:Statistik#German, Statistik'', "description of a State (polity), state, a country") is the discipline that concerns the collection, organization, analysis, interpretation, and presentation of ...
) to monitor changes in the
nutrition
Nutrition is the biochemical and physiological process by which an organism uses food to support its life. It provides organisms with nutrients, which can be metabolized to create energy and chemical structures. Failure to obtain sufficient n ...
of
developing nation
A developing country is a sovereign state with a lesser developed industrial base and a lower Human Development Index (HDI) relative to other countries. However, this definition is not universally agreed upon. There is also no clear agreem ...
s. In human populations, average height can distill down complex data about the group's birth, upbringing, social class, diet, and
health care system
Health, according to the World Health Organization, is "a state of complete physical, Mental health, mental and social well-being and not merely the absence of disease and infirmity".World Health Organization. (2006)''Constitution of the World H ...
.
In their research, Baten, Stegl and van der Eng came to the conclusion that a change in the average height is a sign for a change in the economic development. With broad data of Indonesia, the researchers state that several incidents in the history of the country has led not only to a change in the economy but also to a change in the population’s average height.
See also
*
Acrophobia
Acrophobia is an extreme or irrational fear or phobia of heights, especially when one is not particularly high up. It belongs to a category of specific phobias, called space and motion discomfort, that share both similar causes and options for ...
(fear of heights)
*
Centimetre–gram–second system of units
The centimetre–gram–second system of units (abbreviated CGS or cgs) is a variant of the metric system based on the centimetre as the unit of length, the gram as the unit of mass, and the second as the unit of time. All CGS mechanical units a ...
*
Chinese units of measurement
Chinese units of measurement, known in Chinese as the ''shìzhì'' ("market system"), are the traditional units of measurement of the Han Chinese. Although Chinese numerals have been decimal (base-10) since the Shang dynasty, Shang, several Chine ...
*
Elevation
The elevation of a geographic location is its height above or below a fixed reference point, most commonly a reference geoid, a mathematical model of the Earth's sea level as an equipotential gravitational surface (see Geodetic datum § Vert ...
*
Height gauge
A height gauge is a measuring device used for determining the height of objects, and for marking of items to be worked on.
These measuring tools are used in metalworking or metrology to either set or measure vertical distances; the pointer is s ...
*
Imperial units
The imperial system of units, imperial system or imperial units (also known as British Imperial or Exchequer Standards of 1826) is the system of units first defined in the British Weights and Measures Act 1824 and continued to be developed thro ...
*
International System of Units
The International System of Units, known by the international abbreviation SI in all languages and sometimes pleonastically as the SI system, is the modern form of the metric system and the world's most widely used system of measurement. E ...
*
United States customary units
United States customary units form a system of measurement units commonly used in the United States and U.S. territories since being standardized and adopted in 1832. The United States customary system (USCS or USC) developed from English units ...
*
Vertical metre
Vertical position or vertical location, also known as vertical level or simply level, is a position along a vertical direction above or below a given vertical datum (reference level).
Vertical distance or vertical separation is the distance betwe ...
References
External links
*
*
*
{{Authority control