The Haufe Buzzer 2 is an American
high-wing
A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes.
A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...
,
strut-braced
In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
single-seat
motor glider
A motor glider is a fixed-wing aircraft that can be flown with or without engine power. The FAI Gliding Commission Sporting Code definition is: a fixed-wing aerodyne equipped with a means of propulsion (MoP), capable of sustained soaring flight ...
that was designed and constructed by
Walter Haufe.
[Said, Bob: ''1983 Sailplane Directory, ]Soaring Magazine
''SOARING'' is a magazine published monthly as a membership benefit of the Soaring Society of America. It was first published in 1937. The headquarters is in Hobbs, New Mexico. The magazine's article topics include safety issues and accounts of ind ...
'', page 121. Soaring Society of America, November 1983. USPS 499-920
Design and development
After Haufe's earlier
Buzzer
A buzzer or beeper is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric (''piezo'' for short). Typical uses of buzzers and beepers include alarm devices, timers, train and confirmation of user input such as a ...
was deemed less than successful, due to the insufficiently reliable
Nelson Aircraft
The Nelson Aircraft Corporation was founded in 1945 by sailplane pilot Ted Nelson and sailplane designer William Hawley Bowlus in San Fernando, California.
Bowlus and Nelson formed the Nelson Aircraft Corporation to build a two-seat, motor gli ...
engine, Haufe retired that design and designed a new aircraft, which became the ''Buzzer 2''. Intended to be a cross between a conventional sailplane and a
light aircraft
A light aircraft is an aircraft that has a maximum gross takeoff weight of or less.Crane, Dale: ''Dictionary of Aeronautical Terms, third edition'', page 308. Aviation Supplies & Academics, 1997.
Light aircraft are used as utility aircraft c ...
the aircraft was built with a wing span and has a 16:1
glide ratio
In aerodynamics, the lift-to-drag ratio (or L/D ratio) is the lift generated by an aerodynamic body such as an aerofoil or aircraft, divided by the aerodynamic drag caused by moving through air. It describes the aerodynamic efficiency under give ...
.
The Buzzer 2 is constructed with a welded steel tube
fuselage
The fuselage (; from the French ''fuselé'' "spindle-shaped") is an aircraft's main body section. It holds crew, passengers, or cargo. In single-engine aircraft, it will usually contain an engine as well, although in some amphibious aircraft t ...
and a wooden wing, all covered with doped
aircraft fabric covering
Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as ar ...
. The relatively low 8:1
aspect ratio wing uses a single
spar
SPAR, originally DESPAR, styled as DE SPAR, is a Dutch multinational that provides branding, supplies and support services for independently owned and operated food retail stores. It was founded in the Netherlands in 1932, by Adriaan van Well, ...
and is supported by a single
lift strut
In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...
. The wing employs a modified
NACA
The National Advisory Committee for Aeronautics (NACA) was a United States federal agency founded on March 3, 1915, to undertake, promote, and institutionalize aeronautical research. On October 1, 1958, the agency was dissolved and its assets ...
2412
airfoil
An airfoil (American English) or aerofoil (British English) is the cross-sectional shape of an object whose motion through a gas is capable of generating significant lift, such as a wing, a sail, or the blades of propeller, rotor, or turbine.
...
. The
landing gear
Landing gear is the undercarriage of an aircraft or spacecraft that is used for takeoff or landing. For aircraft it is generally needed for both. It was also formerly called ''alighting gear'' by some manufacturers, such as the Glenn L. Martin ...
is a fixed monowheel and two wing-mounted outrigger wheels that support the wing during taxiing. The engine is a Curtiss
snowmobile
A snowmobile, also known as a Ski-Doo, snowmachine, sled, motor sled, motor sledge, skimobile, or snow scooter, is a motorized vehicle designed for winter travel and recreation on snow. It is designed to be operated on snow and ice and does not ...
engine that turns at a maximum rpm of 6000, powering the propeller through an oil-immersed 2:1 chain reduction drive, giving a propeller speed of 3000 rpm.
Only one Buzzer 2 was constructed.
Operational history
Haufe reported that the aircraft uses to take-off and climbs at about 500 feet per minute (2.5 m/s). The aircraft was still on the US
Federal Aviation Administration
The Federal Aviation Administration (FAA) is the largest transportation agency of the U.S. government and regulates all aspects of civil aviation in the country as well as over surrounding international waters. Its powers include air traffic m ...
registry in July 2011, registered in the ''
Experimental - Amateur-built'' category.
Specifications (Buzzer 2)
See also
References
{{Walter Haufe aircraft
1970s United States sailplanes
Homebuilt aircraft