Gel point
In polymer chemistry, the gel point is an abrupt change in the viscosity of a solution containing polymerizable components. At the gel point, a solution undergoes gelation as reflected in a loss in fluidity. Gelation is characteristic of polymeri ...
is the temperature at which
diesel
Diesel may refer to:
* Diesel engine, an internal combustion engine where ignition is caused by compression
* Diesel fuel, a liquid fuel used in diesel engines
* Diesel locomotive, a railway locomotive in which the prime mover is a diesel engin ...
or
biodiesel
Biodiesel is a form of diesel fuel derived from plants or animals and consisting of long-chain fatty acid esters. It is typically made by chemically reacting lipids such as animal fat (tallow), soybean oil, or some other vegetable oil with ...
fuel
freezes
Freezing is a phase transition where a liquid turns into a solid when its temperature is lowered below its freezing point. In accordance with the internationally established definition, freezing means the solidification phase change of a liquid o ...
solid and can no longer flow by gravity or be pumped through fuel lines. This phenomenon happens when a fuel reaches a low enough temperature whereby enough
wax
Waxes are a diverse class of organic compounds that are lipophilic, malleable solids near ambient temperatures. They include higher alkanes and lipids, typically with melting points above about 40 °C (104 °F), melting to giv ...
crystals have formed to prevent any movement in the oil. For #2 diesel this is usually around .
For the fuel to become pump able again, it needs to be brought above the gel point temperature to the
Un gel point, which is typically near its pour point. However, most of the waxes will still remain in solid form and the fuel has to be warmed up further until its
Remix temperature in order to completely re-melt and re-dissolve the waxes.
Anti-gel
additives
Additive may refer to:
Mathematics
* Additive function, a function in number theory
* Additive map, a function that preserves the addition operation
* Additive set-functionn see Sigma additivity
* Additive category, a preadditive category with fi ...
are therefore commonly added to diesel or biodiesels where cold temperature is expected. They act to reduce the formation of wax crystals in the fuel, thereby lowering the
pour point
The pour point of a liquid is the temperature below which the liquid loses its flow characteristics.
It is defined as the minimum temperature in which the oil has the ability to pour down from a beaker. In crude oil a high pour point is generall ...
and the gel point of the fuel. Anti-gel additives may not necessarily affect the
cloud point
In liquids, the cloud point is the temperature below which a transparent solution undergoes either a liquid-liquid phase separation to form an emulsion or a liquid-solid phase transition to form either a stable sol or a suspension that settles a ...
.
See also
*
Cloud point
In liquids, the cloud point is the temperature below which a transparent solution undergoes either a liquid-liquid phase separation to form an emulsion or a liquid-solid phase transition to form either a stable sol or a suspension that settles a ...
*
Cold filter plugging point Cold filter plugging point (CFPP) is the lowest temperature, expressed in degrees Celsius (°C), at which a given volume of diesel type of fuel still passes through a standardized filtration device in a specified time when cooled under certain con ...
*
Petroleum
Petroleum, also known as crude oil, or simply oil, is a naturally occurring yellowish-black liquid mixture of mainly hydrocarbons, and is found in geological formations. The name ''petroleum'' covers both naturally occurring unprocessed crud ...
*
Pour point
The pour point of a liquid is the temperature below which the liquid loses its flow characteristics.
It is defined as the minimum temperature in which the oil has the ability to pour down from a beaker. In crude oil a high pour point is generall ...
References
Chemical properties
{{chem-stub