Galion Iron Works on:
[Wikipedia]
[Google]
[Amazon]
Galion Iron Works is the original name of the company that built the ''Galion'' brand of construction equipment. Known for their graders, it also manufactured rollers, cranes, asphalt millers and even riding squeegees among other machines.
Gallion changed its name to the Galion Manufacturing Company in 1973. It was acquired by
The motor grader line received the first power-shift transmission, which was a major advance, in 1955. Called the Galion Grade-O-Matic drive, it utilized a torque converter, output shaft governor and power-shift transmission, providing simple two-lever control of speed and direction. The Galion T-700 garnered the world's largest grader title in 1955. Larger than anything else in the grader industry, it had and weighed over 40,000 pounds.
The graders and rollers built by the Galion Iron Works Company created many of the roads and highways (including the Interstate Highway System) in North America, as well as South America and other countries. After 60 years with the same name, the Galion Iron Works and Manufacturing Company was renamed the Galion Manufacturing Company in 1973. The following year a transaction was completed making Galion a division of 
Galion introduced its modern-looking articulated grader line in 1979. It featured a distinctively sloped rear engine hood and was identified as the A-series for "Articulated". Initially three models were introduced, the A-500, A-550, and A-600, weighing up to 30,000 pounds. These models joined the rigid-frame models, which continued in the Galion line until the mid-1980s.
In 1986, the grader products took on the name of the parent company, Dresser, and the Galion name was temporarily dropped. In 1988, the grader line was consolidated into three articulated models named the 830, 850 and 870. That same year, Galion became part of the Komatsu Dresser Company (KDC) joint venture. The Galion name reemerged in 1992, when the Galion division of KDC was established. From 1995, the three basic Galion graders were badged and renumbered to fit into Komatsu's GD series, and featured modified specifications. The Komatsu-designed GD825A-2 is its largest grader, weighing 58,250 pounds and producing .
Galion Iron Works is the original name of the company that built the ''Galion'' brand of construction equipment. Known for their graders, it also manufactured rollers, cranes, asphalt millers and even riding squeegees among other machines.
Gallion changed its name to the Galion Manufacturing Company in 1973. It was acquired by Dresser Industries
Dresser Industries was a multinational corporation headquartered in Dallas, Texas, United States, which provided a wide range of technology, products, and services used for developing energy and natural resources. In 1998, Dresser merged with its ...
in 1974, and ultimately subsumed into a Dresser- Komatsu joint venture in 1988.
History
The Galion Iron Works Company ofGalion, Ohio
Galion is a city in Crawford, Morrow, and Richland counties in the U.S. state of Ohio. The population was 10,453 at the 2020 census. Galion is the second-largest city in Crawford County after Bucyrus.
The Crawford County portion of Galion i ...
, was founded by David Charles Boyd and his three brothers in 1907. In its early years, the Galion produced a wide range of road-building and other construction equipment, such as drag scrapers, plows, wagons, stone unloaders, rock crushers, and a variety of other "experimental machines". By 1911, Galion began production of light-duty horse-drawn road graders.
The company's success and product diversification brought about its reorganization in 1923, and a name change to ''Galion Iron Works and Manufacturing Company''. The "Light Premier" was an early grader produced in 1915. It was billed as light enough for two horses, but strong enough for four. Its blade could be raised, lowered, angled, tilted, and shifted sideways, just like the blade movements on a modern grader.
Galion was known for building some of the largest pull-type graders in the industry. Popular throughout the 1920s and 1930s, these huge machines were pulled by the largest traction engines and crawler tractors. These graders outperformed other motor graders of the day. Galion continued selling its pull-type graders until 1945, long after other manufacturers discontinued them.
In 1922, Galion was one of the first to develop a self-propelled motor grader. The tractor engine and transmission were located in the rear of the frame, and the operator cockpit was located near the center of the machine. Also in the 1920s, development began on one of Galion's greatest achievements- the Galion hydraulic control
Hydraulics (from Greek: Υδραυλική) is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counte ...
. Used on both pull-type and self-propelled graders, this hydraulic system was one of the first to be applied to grader controls.
In 1929, Jeffrey Manufacturing Company
The Jeffrey Manufacturing Company was one of the largest industrial plants in Columbus, Ohio during the Second Industrial Revolution. It belonged to the original cluster of factories which were set up in the Milo-Grogan area of the city, includin ...
of Columbus, Ohio
Columbus () is the state capital and the most populous city in the U.S. state of Ohio. With a 2020 census population of 905,748, it is the 14th-most populous city in the U.S., the second-most populous city in the Midwest, after Chicago, an ...
, purchased the Galion Organization, but the name of the company remained unchanged.
The motor grader line received the first power-shift transmission, which was a major advance, in 1955. Called the Galion Grade-O-Matic drive, it utilized a torque converter, output shaft governor and power-shift transmission, providing simple two-lever control of speed and direction. The Galion T-700 garnered the world's largest grader title in 1955. Larger than anything else in the grader industry, it had and weighed over 40,000 pounds.
The graders and rollers built by the Galion Iron Works Company created many of the roads and highways (including the Interstate Highway System) in North America, as well as South America and other countries. After 60 years with the same name, the Galion Iron Works and Manufacturing Company was renamed the Galion Manufacturing Company in 1973. The following year a transaction was completed making Galion a division of Dresser Industries
Dresser Industries was a multinational corporation headquartered in Dallas, Texas, United States, which provided a wide range of technology, products, and services used for developing energy and natural resources. In 1998, Dresser merged with its ...
, Inc.
Galion introduced its modern-looking articulated grader line in 1979. It featured a distinctively sloped rear engine hood and was identified as the A-series for "Articulated". Initially three models were introduced, the A-500, A-550, and A-600, weighing up to 30,000 pounds. These models joined the rigid-frame models, which continued in the Galion line until the mid-1980s.
In 1986, the grader products took on the name of the parent company, Dresser, and the Galion name was temporarily dropped. In 1988, the grader line was consolidated into three articulated models named the 830, 850 and 870. That same year, Galion became part of the Komatsu Dresser Company (KDC) joint venture. The Galion name reemerged in 1992, when the Galion division of KDC was established. From 1995, the three basic Galion graders were badged and renumbered to fit into Komatsu's GD series, and featured modified specifications. The Komatsu-designed GD825A-2 is its largest grader, weighing 58,250 pounds and producing .
References
{{reflist Construction and civil engineering companies of the United States Companies based in Ohio Iron Works