A guy-wire, guy-line, guy-rope, or stay, also called simply a guy, is a tensioned

cable Cable may refer to: Mechanical * Nautical cable, an assembly of three or more ropes woven against the weave of the ropes, rendering it virtually waterproof * Wire rope, a type of rope that consists of several strands of metal wire laid into a hel ...

designed to add stability to a free-standing structure. They are used commonly for ship masts,

radio masts Radio masts and towers are typically tall structures designed to support antenna (radio), antennas for telecommunications and broadcasting, including television. There are two main types: guyed and self-supporting structures. They are among the t ...

wind turbine A wind turbine is a device that converts the kinetic energy of wind into electrical energy. Hundreds of thousands of large turbines, in installations known as wind farms, now generate over 650 gigawatts of power, with 60 GW added each year. ...

utility pole A utility pole is a column or post typically made out of wood used to support overhead power lines and various other public utilities, such as electrical cable, optical fiber, fiber optic cable, and related equipment such as Distribution transfor ...

s, and

tent A tent () is a shelter consisting of sheets of fabric or other material draped over, attached to a frame of poles or a supporting rope. While smaller tents may be free-standing or attached to the ground, large tents are usually anchored using gu ...

s. A thin vertical mast supported by guy wires is called a

guyed mast A guyed mast or guyed tower is a tall thin vertical structure that depends on guy lines (diagonal tensioned cables attached to the ground) for stability. The mast itself has the compressive strength to support its own weight, but does not ha ...

. Structures that support

antennas In radio engineering, an antenna or aerial is the interface between radio waves propagating through space and electric currents moving in metal conductors, used with a transmitter or receiver. In transmission, a radio transmitter supplies a ...

are frequently of a lattice construction and are called "

towers A tower is a tall structure, taller than it is wide, often by a significant factor. Towers are distinguished from masts by their lack of guy-wires and are therefore, along with tall buildings, self-supporting structures. Towers are specific ...

". One end of the guy is attached to the structure, and the other is anchored to the ground at some distance from the mast or tower base. The

tension Tension may refer to: Science * Psychological stress * Tension (physics), a force related to the stretching of an object (the opposite of compression) * Tension (geology), a stress which stretches rocks in two opposite directions * Voltage or el ...

in the diagonal guy-wire, combined with the

compression Compression may refer to: Physical science *Compression (physics), size reduction due to forces *Compression member, a structural element such as a column *Compressibility, susceptibility to compression * Gas compression *Compression ratio, of a ...

and

buckling In structural engineering, buckling is the sudden change in shape (deformation) of a structural component under load, such as the bowing of a column under compression or the wrinkling of a plate under shear. If a structure is subjected to a gr ...

strength of the structure, allows the structure to withstand lateral loads such as wind or the weight of

cantilevered A cantilever is a rigid structural element that extends horizontally and is supported at only one end. Typically it extends from a flat vertical surface such as a wall, to which it must be firmly attached. Like other structural elements, a cant ...

structures. They are installed radially, usually at equal angles about the structure, in trios and quads. As the tower leans a bit due to the wind force, the increased guy tension is resolved into a compression force in the tower or mast and a lateral force that resists the wind load. For example, antenna masts are often held up by three guy-wires at 120° angles. Structures with predictable lateral loads, such as electrical utility poles, may require only a single guy-wire to offset the lateral pull of the electrical wires, at a spot where the wires change direction. Conductive guy cables for radio antenna masts may disturb the radiation pattern of the antenna, so their electrical characteristics must be included in the design.

Uses

Sailing

The guys supporting a sailboat mast are called "standing rigging" and in modern boats are stainless steel wire rope. Guys are rigged to the bow and stern, usually as a single guy. Lateral guys attach to "chain plates" port and starboard attached to the hull. Multiple guys are usually installed with spreaders to help keep the mast straight ("in column"). Temporary guys are also used on a

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

. A fore-guy is a term for a line (

rope A rope is a group of yarns, plies, fibres, or strands that are twisted or braided together into a larger and stronger form. Ropes have tensile strength and so can be used for dragging and lifting. Rope is thicker and stronger than similarly ...

) attached to and intended to control the free end of a

spar SPAR, originally DESPAR, styled as DE SPAR, is a Dutch multinational that provides branding, supplies and support services for independently owned and operated food retail stores. It was founded in the Netherlands in 1932, by Adriaan van Well, ...

. On a modern

sloop A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular sa ...

-rigged

with a symmetric

spinnaker A spinnaker is a sail designed specifically for sailing off the wind on courses between a reach (wind at 90° to the course) to downwind (course in the same direction as the wind). Spinnakers are constructed of lightweight fabric, usually n ...

, the

spinnaker pole A spinnaker pole is a spar used in sailboats (both dinghys and yachts) to help support and control a variety of headsails, particularly the spinnaker. However, it is also used with other sails, such as genoas and jibs, when sailing downwind with ...

is the spar most commonly controlled by one or more guys.

Utility pole guy-wires

Utility pole A utility pole is a column or post typically made out of wood used to support overhead power lines and various other public utilities, such as electrical cable, optical fiber, fiber optic cable, and related equipment such as Distribution transfor ...

s are buried in the ground and have sufficient strength to stand on their own; guys are needed on some poles only to support unbalanced lateral loads due to the utility wires attached to them, or to resist ground movement. Guys are particularly needed on ''dead-end'' (''anchor'') poles, where a long straight section of wire line ends, or angles off in another direction. To protect the public against faults that might allow the cable to become electrified, utility guy cables usually either have a ceramic

strain insulator A strain insulator is an electrical insulator that is designed to work in mechanical tension (strain), to withstand the pull of a suspended electrical wire or cable. They are used in overhead electrical wiring, to support radio antennas and over ...

("Johnny ball"), or a fiberglass guy strain insulator inserted near the top, to ensure that any dangerous voltages do not reach the lower end of the wire accessible to the public. The lower end where the cable enters the ground is often encased in a length of yellow plastic reflector to make it more visible, so that people or vehicles do not run into it. Sidewalk guy wire

In urban areas where the ground area around the pole is restricted, a variation called a ''sidewalk guy'' is often used. In this type the guy line extends diagonally from the top of the pole to a horizontal spar brace extending out from the middle of the pole, and from this it continues vertically to the ground. Thus the bottom part of the guy is vertical and does not obstruct headroom, so a sidewalk can pass between the pole and the guy. An alternative to guy-wires sometimes used on dead-end poles is a ''push-brace pole'', a second pole set at an angle in the ground which butts diagonally against the side of the vertical pole.

Antenna mast guy-wires

Electromagnetic fields from the antennas complicate the design of guys that support mast antennas. Conductive metal guy-wires whose lengths are near to quarter wavelength multiples of the transmitted frequency can distort the

radiation pattern In the field of antenna design the term radiation pattern (or antenna pattern or far-field pattern) refers to the ''directional'' (angular) dependence of the strength of the radio waves from the antenna or other source.Constantine A. Balanis: “A ...

of the antenna. This also applies to guy wires of neighboring masts or metal structures situated nearby. To prevent this, each guy wire is divided by strain insulators into multiple sections, each segment non-resonant at the transmitted wavelength. Cylindrical or egg-shaped

porcelain Porcelain () is a ceramic material made by heating substances, generally including materials such as kaolinite, in a kiln to temperatures between . The strength and translucence of porcelain, relative to other types of pottery, arises mainl ...

"Johnny ball" insulators (also called "egg insulators") are usually used. Non-conductive guys of Kevlar fiber (Phillystran) or extruded fiberglass rod are frequently used to not disturb the radiation pattern of the antennas. The strength and low stretch properties of Kevlar fiber approaches that of steel. However, Kevlar is very susceptible to ultraviolet degradation, so it is enclosed in a UV resistant plastic sheath. The individual sections of conductive guys can develop large charges of

static electricity Static electricity is an imbalance of electric charges within or on the surface of a material or between materials. The charge remains until it is able to move away by means of an electric current or electrical discharge. Static electricity is na ...

, especially on very tall masts. The

voltage Voltage, also known as electric pressure, electric tension, or (electric) potential difference, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to m ...

caused by this static electricity can be several times larger than that generated by the transmitter. In order to avoid dangerous and unpredictable discharges, the insulators must be designed to withstand this high voltage, which results at tall masts in over-dimensioned backstage insulators. At each backstage insulator, a

lightning arrestor A lightning arrester (alternative spelling lightning arrestor) (also called lightning isolator) is a device, essentially an air gap between an electric wire and ground, used on electric power transmission and telecommunication systems to protect ...

in the form of an arc gap is required for the purpose of over-voltage protection in case of

lightning Lightning is a naturally occurring electrostatic discharge during which two electric charge, electrically charged regions, both in the atmosphere or with one on the land, ground, temporarily neutralize themselves, causing the instantaneous ...

strikes. The insulators and arrestors must be maintained carefully, because an insulator failure can result in a mast collapse. Egg insulators have the porcelain in compression and if it fails, the end loops of the guy wires are still intertwined. AM radio broadcast towers are often fitted with insulators at the mast base and the RF energy is fed at that point. Some are also insulated at the center for feeding the RF energy at that point. Wire rope guys are frequently used and segmented with insulators at several points. Extensive lightning protection is required for insulated towers. On antennas for long-wave and VLF, the guys may serve an electrical function, either for capacitive lengthening of the mast or for feeding the mast with the radiation power. In these cases, the guys are fixed without an insulator on the mast, but there is at least one insulator in the guy if necessary. If guys are used for feeding the mast with high frequency power it is often possible to use a grounded mast. The power to the guys is fed via wires running from a tuning unit to the feed point on the guys.

Crane tag lines

When operating a crane, guy wires, known as tag lines, may be connected to unwieldy payloads, allowing ground crew to control rotation and swaying while maintaining a safe distance.

Firefighting

Guys can be used to raise an extension ladder in a technique called a church raise.

Anchors

In ground-anchored guys, the structure which attaches the guy-wire to the ground is called an ''

anchor An anchor is a device, normally made of metal , used to secure a vessel to the bed of a body of water to prevent the craft from drifting due to wind or current. The word derives from Latin ''ancora'', which itself comes from the Greek ἄγ ...

''. The anchor must be adequate to resist the maximum tensile load of the guy wires; both the dead load of the tension of the wire and the maximum possible live load due to wind. Since the guy wire exerts its force at an angle, the anchor has both vertical and lateral (horizontal) forces on it. The anchor relies on the lateral shear strength of the soil to resist the forces from all of the guys attached to it. Several types of anchor are used:

Dead man anchors

In this type, a hole is excavated and an object with a large surface area is placed in it with the guy wire attached, and the hole is backfilled with earth or concrete. In the historical form of dead man anchor, a log is buried horizontally in a trench with the guy attached perpendicularly to its center. Modern forms are the plate anchor, in which the guy is attached to a rod with an eyelet extending from the center of a steel plate buried diagonally, perpendicular to the angle of the guy. In the concrete anchor, a diagonal rod with an eyelet extending in the guy direction is cemented into a hole filled with steel reinforced concrete. A sufficiently massive concrete block on the surface of the ground can also be used as a dead man.

Screw anchors

This type consists of a rod with wide screw blades on the end and an eyelet on the other for the guy wire. It is screwed deep into the ground, at the same angle as the guy, by a truck-mounted drill machine. These are commonly used as guy anchors for utility poles since they are quick to install with a truck mounted hydraulic powered auger drive.

Expanding anchors

A rod with a pivoted blade on the end is driven into the earth. When the guy wire is attached and tensioned, its force pulls the blade open, "setting" it into the soil. These are often used by the military for rapid mast installations.

Grouted anchors

These are used in both soil and rock. A hole is drilled at the angle of the guy. A steel anchor rod with an eye is inserted, and the hole around it is filled with a liquid grout consisting of concrete and an expansion agent or a structural epoxy. When the grout hardens or expands, the anchor is secure.

Guyed structures

Historically, guyed structures have been some of the

tallest man-made structures in the world The world's tallest human-made structure is the Burj Khalifa in Dubai (of the United Arab Emirates). The building gained the official title of "tallest building in the world" and the tallest self-supported structure at its opening on January ...

. There are also many structures which consist of a free standing bottom and a guyed top. These are either

partially guyed tower A guyed mast or guyed tower is a tall thin vertical structure that depends on guy lines (diagonal tensioned cables attached to the ground) for stability. The mast itself has the compressive strength to support its own weight, but does not h ...

s or additionally guyed towers, the latter of which may be used temporarily to support tall buildings during their construction.

References

{{Reflist Cables Guyed masts