The gothic hilted
sword
A sword is an edged, bladed weapon intended for manual cutting or thrusting. Its blade, longer than a knife or dagger, is attached to a hilt and can be straight or curved. A thrusting sword tends to have a straighter blade with a pointed ti ...
s were a family of swords carried by
officers
An officer is a person who has a position of authority in a hierarchical organization. The term derives from Old French ''oficier'' "officer, official" (early 14c., Modern French ''officier''), from Medieval Latin ''officiarius'' "an officer," fro ...
and some
NCOs
A non-commissioned officer (NCO) is a military officer who has not pursued a commission. Non-commissioned officers usually earn their position of authority by promotion through the enlisted ranks. (Non-officers, which includes most or all enli ...
of the
British Army
The British Army is the principal land warfare force of the United Kingdom, a part of the British Armed Forces along with the Royal Navy and the Royal Air Force. , the British Army comprises 79,380 regular full-time personnel, 4,090 Gurk ...
between 1822 and the present day. They were primarily
infantry
Infantry is a military specialization which engages in ground combat on foot. Infantry generally consists of light infantry, mountain infantry, motorized infantry & mechanized infantry, airborne infantry, air assault infantry, and marine i ...
swords, although they were also regulation pattern for some other officers such as
surgeons
In modern medicine, a surgeon is a medical professional who performs surgery. Although there are different traditions in different times and places, a modern surgeon usually is also a licensed physician or received the same medical training as ...
and
staff officers
A military staff or general staff (also referred to as army staff, navy staff, or air staff within the individual services) is a group of officers, enlisted and civilian staff who serve the commander of a division or other large military u ...
. The term "Gothic hilt" is derived from a perceived similarity between the curved bars of the guard and the arches found in
Gothic architecture
Gothic architecture (or pointed architecture) is an architectural style that was prevalent in Europe from the late 12th to the 16th century, during the High and Late Middle Ages, surviving into the 17th and 18th centuries in some areas. It e ...
. They were elegant aesthetically pleasing weapons, although they were considered by some to be mediocre fighting swords. The weapon and its variants had a very long service life.
![Gothic Hilts](https://upload.wikimedia.org/wikipedia/commons/c/c3/Gothic_Hilts.JPG)
They were replaced ultimately by the
1897 pattern British infantry officer's sword
The 1897 pattern infantry officers’ sword is a straight-bladed, three-quarter basket-hilted sword that has been the regulation sword for officers of the line infantry of the British Army from 1897 to the present day.
History
The curved, Gothic ...
, first having the 1822 pipe-back blade replaced by the 1845 fullered blade, then the 1845 type blade replaced by a new thrusting blade in 1892 and then receiving a new steel hilt in 1895, which was then updated slightly in 1897.
Private purchase
Although infantry sergeants' and cavalry troopers' swords were issued by the army, officers were expected to purchase their own equipment. In theory they were required to purchase a sword which conformed to an official pattern, however some regiments had their own peculiarities and some allowed their officers some leeway in specification, so there are variations between individual pieces. Also, minor differences between individual manufacturers' examples exist, partly due to their own unique interpretations of the specification for the weapon. Lastly, officers could in fact purchase a blade of their own choosing if they cared to, so long as it looked more or less regulation when worn in the scabbard. Therefore, the precise length, curvature and width of blades varies between examples, with a small number of officers choosing entirely different types of non-regulation blade. Companies like Wilkinson of Pall Mall sold officers' swords in a variety of lengths, curves, widths and styles, while all conforming more or less to the basic regulations for each branch of the service.
1822 pattern infantry officer’s sword
The 1822 dress regulations mandated the introduction of a new sword, to replace the 1803 flank officer's sabre and the spadroon bladed 1796 line infantry officer's sword.
The sword featured a , slightly curved blade of what was known as the 'pipe-back' design, a cross-section sometimes referred to as 'key-hole' shape in Victorian sources. This consisted of a flat, un-fullered, single edged blade with a nearly straight rod running along the back of the blade, with a 'false-edge' being formed on the back edge near to the tip, sometimes described as a 'quill-point'. This style of blade seems to have been the innovation of the maker Prosser of Charing Cross, London, and first appeared on 1796 light cavalry style blades from around 1810–1815. This cross-section was then translated to the new narrower 1822 infantry officers' sword. The 1822 blades generally featured acid etched decoration showing the monarch's monogram and other devices. The pipe-backed blade is very light for its size and has a very fine edge.
The
gilded
Gilding is a decorative technique for applying a very thin coating of gold over solid surfaces such as metal (most common), wood, porcelain, or stone. A gilded object is also described as "gilt". Where metal is gilded, the metal below was tradi ...
brass
Brass is an alloy of copper (Cu) and zinc (Zn), in proportions which can be varied to achieve different mechanical, electrical, and chemical properties. It is a substitutional alloy: atoms of the two constituents may replace each other with ...
, 'half-basket' hilt featured the characteristic Gothic outline, with the monarch's monogram formed in the guard. The hilt had an ornate one piece pommel and 'backstrap' enclosing the end and back of the grip, held in place by a ribbed brass ring at the top of the grip and a tang nut or peened rivet at the end of the pommel. The inside section of the guard folded on a hinge towards the blade, to allow the sword to rest easily against the wearer's side when worn. The wooden grip was covered in shark skin, known as shagreen, to give a textured surface for a secure grip, and this was wrapped with brass, copper or silver twist-wire in the recesses of the ribbed grip.
Although the pipe/rod reinforcing at the back edge of the blade was intended to add rigidity for the thrust and strength/mass for the cut, the blade was rather flexible and light at the centre of percussion when made in the infantry sword size. The half basket guard gave better protection to the hand than its predecessor, the
1796 pattern, however the brass could be fragile on some examples, as illustrated by many surviving examples having damage or repairs. Later in the 19th century, it was noted in many articles on British military swords (including the lecture of John Latham of Wilkinson swordmakers in 1862) that these brass guards were vulnerable to hard blows from strong cutting swords such as Indian tulwars.
1845 pattern infantry officer’s sword
In 1845, the pipe backed blade was replaced by Henry Wilkinson's design. This was a slightly curved cut-and-thrust blade, generally of the same length of the previous pattern, however the new blade featured a single, wide fuller and a flat back, rather than the pipe back, with a symmetrical spear-point rather than the quill-point. In essence it was a curved backsword blade with an improved point. It was a slightly heavier and more robust blade than the 1822 pipe-back. This new blade was also carried over onto cavalry, engineers and artillery officer's swords in 1845 and to naval officer's swords in 1846.
The hilt remained essentially unchanged from the 1822 pattern, although there was a tendency for brass guards after 1845 to be made somewhat thicker and more robust than previously. The hinged guard flap, which had been standard (if not universal) from 1822, started to disappear in the 1850s, to be replaced by a solid brass guard almost universally after around 1860. This change to the hilt is sometimes referred to as the '1854 pattern', but it was not technically a 'pattern' and the change seems to have happened at the end of the 1850s generally. Therefore, there is no actual '1854 pattern' other than the Foot Guards sword (details below). Wilkinson were still making infantry officers' swords with folding inner guards until 1859 as standard and do not seem to have switched to universally solid guards until 1860. The 1845 blade remained the same.
Direct comparison of the 1822 and 1845 blades shows that the new weapon was an improvement, being stiffer in bending and compression. It had a more robust edge, was a little heavier, had more mass in the centre of percussion and the symmetrical spear-point is much better at penetrating. The blade is better therefore at cutting, thrusting and guarding. Contemporary views on the new blade were favourable and it was almost universally adopted within a year. It was also adopted and embraced by experienced combat officers ordering fighting swords who could have chosen any type of private purchase blade (for example Major Hodson and Brigadier-General Jacob both chose this blade type for their custom fighting swords, which survive in the National Army Museum and Royal Armouries respectively) and it was emulated by various foreign militaries. Original sharp examples and replicas perform well in cutting tests, easily equalling other backsword and sabre types.
During the period of the 1845 blades use on infantry officers' swords, from 1845 to 1892, it has been observed that blades tended to get straighter. This is a general tendency, but was not universal. One can find early examples with straighter blades and later examples with more curved blades. The curvature varied, though it is fair to say that more straight examples seem to appear from later dates. The width of the blades were usually , but some examples were only wide, and again these narrower ones tend to be later in date. Again this is a general tendency and not a rule. 'Piquet' or dress weight examples were made with much narrower blades and correspondingly smaller hilts. The standard length of these blades was , but again there was variation, with officers basically being allowed to order whatever length best suited them. Most surviving examples are . Thickness or mass of blades also varied and different examples can feel quite diverse in the hand. Some are balance to be better cutters while others make better thrusting swords.
1892 pattern infantry officer's sword
The 1845 sword enjoyed a long service life and was used successfully in colonial wars all over the world, often winning the praise of British soldiers who used it to defend their lives. However, in 1892 proponents of the theory that thrust should be used exclusively over cutting for swords prevailed and the cut and thrust blade was replaced by a straight dedicated thrusting blade with a thick, fullered,
dumbbell
The dumbbell, a type of free weight, is a piece of equipment used in weight training. It can be used individually or in pairs, with one in each hand.
History
The forerunner of the dumbbell, halteres, were used in ancient Greece as lifting w ...
section and a very acute narrow tapered point. Unburdened by the design compromises of a requirement to cut well, this was a triumph of academic theory over real world experience, but was generally well received (Robson reports on its good performance against the
Dervish
Dervish, Darvesh, or Darwīsh (from fa, درویش, ''Darvīsh'') in Islam can refer broadly to members of a Sufi fraternity
A fraternity (from Latin language, Latin ''wiktionary:frater, frater'': "brother (Christian), brother"; whence, ...
es in the
Sudan
Sudan ( or ; ar, السودان, as-Sūdān, officially the Republic of the Sudan ( ar, جمهورية السودان, link=no, Jumhūriyyat as-Sūdān), is a country in Northeast Africa. It shares borders with the Central African Republic t ...
. It was during the
Sudan campaign
The Mahdist War ( ar, الثورة المهدية, ath-Thawra al-Mahdiyya; 1881–1899) was a war between the Mahdist Sudanese of the religious leader Muhammad Ahmad bin Abd Allah, who had proclaimed himself the "Mahdi" of Islam (the "Guided On ...
when a young
Winston Churchill
Sir Winston Leonard Spencer Churchill (30 November 187424 January 1965) was a British statesman, soldier, and writer who served as Prime Minister of the United Kingdom twice, from 1940 to 1945 Winston Churchill in the Second World War, dur ...
sheathed his (cavalry) sword before the charge and used his then modern
Mauser Broomhandle semiautomatic pistol). The 1892 blade is difficult to compare to the 1845 blade using historical accounts, because after 1892 there were comparatively far fewer encounters where swords were actually used.
In 1895 the brass Gothic hilt was replaced by a steel hilt for line infantry officers, featuring a totally new design of both the guard and the handle. This was married to the 1892 thrusting blade to create an entirely new sword. Accompanying this was a new Sword Exercise system of 1895, promoted by Colonel Fox of the Army Gymnasia and devised by Maestro Masiello of Florence.
Steel gothic-hilted swords
In 1827 officers of the rifle regiments (considered somewhat of an elite), and later in 1854 the regiments of the
Foot Guards, were authorised to carry their own variation of the hilt. The blade remained that of the 1822 pattern sword (changing, along with the line infantry, to a fullered blade in 1845). The hilt was of the Gothic pattern but in steel with the crown and stringed bugle motif (light infantry) or the regimental capbadge (guards) replacing the royal cypher. The steel guards were often less well rendered than that of the brass hilts and there was no folding flap.
The hilt pattern is still current for
The Rifles
The Rifles is an infantry regiment of the British Army. Formed in 2007, it consists of four Regular battalions and three Reserve battalions, plus a number of companies in other Army Reserve battalions. Each battalion of The Rifles was formerly ...
,
Royal Gurkha Rifles
The Royal Gurkha Rifles (RGR) is a rifle regiment of the British Army, forming part of the Brigade of Gurkhas. Unlike other regiments in the British Army, RGR soldiers are recruited from Nepal, which is neither a dependent territory of the Unite ...
and
Foot Guards regiments although with the 1892 thrusting blade rather than the 1845 sabre blade. The
Cameronians also used a variation on the design with the regimental badge in place of the strung bugle.
Variations
Sergeants' swords were similar to those for officers, but generally had undecorated blades with a shorter ricasso. Some sergeants' swords featured a quill-point rather than the spear-point found on officers' swords. Many sergeants' swords were made by Mole of Birmingham and some by Thurkle of London. Some sergeants' swords feature a brass grip instead of the usual shark skin grip.
The
Royal Welch Fusiliers
The Royal Welch Fusiliers ( cy, Ffiwsilwyr Brenhinol Cymreig) was a line infantry regiment of the British Army, and part of the Prince of Wales' Division, that was founded in 1689; shortly after the Glorious Revolution. In 1702, it was designated ...
were entitled to carry a variation on the 1822 sword wherein the cypher of the monarch on the guard was replaced with the feathers of the
Prince of Wales
Prince of Wales ( cy, Tywysog Cymru, ; la, Princeps Cambriae/Walliae) is a title traditionally given to the heir apparent to the English and later British throne. Prior to the conquest by Edward I in the 13th century, it was used by the rulers ...
. This seems to have been an entirely optional affectation for officers of the regiment, as examples without this difference exist.
The
East India Company
The East India Company (EIC) was an English, and later British, joint-stock company founded in 1600 and dissolved in 1874. It was formed to trade in the Indian Ocean region, initially with the East Indies (the Indian subcontinent and Southea ...
used a variant of the 1822 and 1845 sword with the lion rampant holding a crown replacing the cypher of the monarch on the guard.
Staff officers throughout most of the period carried a brass hilted sword like the normal line infantry officers' sword, but with the crossed baton staff symbol in place of the royal cipher.
Generals carried the same sword as their staff, until they were formally replaced by a
Mameluke style sword in 1831.
Some infantry officers who would have generally carried the brass-hilted sword elected to have a hilt made of steel, which was then gilded to look like the normal brass hilt. This of course made for a much stronger guard and this feature is often found among swords ordered by British officers with experience of Indian service.
Lastly, as noted above, officers were given considerable freedom in choosing the exact details of the blades being mounted in regulation style hilts, so long as their swords looked approximately regulation when worn.
References
External links
The 1845 'Wilkinson' type blade, by Matt EastonBritish Infantry Officers' Swords of the 1890s and the 1895 Infantry Sword Exercise, by Matt EastonAnne S. K. Brown Military Collection, Brown University Library105 British military swords, dating from the 17th to the early 20th century from the Cyril Mazansky Collection, on permanent display at the Annmary Brown Memorial.
Identifying British Infantry Officers’ Swords, by Matthew Forde
{{DEFAULTSORT:Gothic Hilted British Infantry Swords (1822, 1827, 1845 And 1892 Patterns)
British service swords
Victorian-era weapons of the United Kingdom