Global Mirror is an IBM technology that provides

data replication Replication in computing involves sharing information so as to ensure consistency between redundant resources, such as software or hardware components, to improve reliability, fault-tolerance, or accessibility. Terminology Replication in comp ...

over extended distances between two sites for

business continuity Business continuity may be defined as "the capability of an organization to continue the delivery of products or services at pre-defined acceptable levels following a disruptive incident", and business continuity planning (or business continuity a ...

and disaster recovery. If adequate

bandwidth Bandwidth commonly refers to: * Bandwidth (signal processing) or ''analog bandwidth'', ''frequency bandwidth'', or ''radio bandwidth'', a measure of the width of a frequency range * Bandwidth (computing), the rate of data transfer, bit rate or thr ...

exists, Global Mirror provides a recovery point objective (RPO) of as low as 3–5 seconds between the two sites at extended distances with no performance impact on the application at the primary site. It replicates the data asynchronously and also forms a consistency group at a regular interval allowing a clean recovery of the application. The two sites can be on separate continents or simply on different utility grids. IBM also provides a synchronous data replication called Metro Mirror, which is designed to support replication at "Metropolitan" distances of (normally) less than 300 km. Global Mirror is based on IBM Copy Services functions: Global Copy and

FlashCopy FlashCopy is an IBM feature supported on various IBM storage devices that made it possible to create, nearly instantaneously, point-in-time snapshot copies of entire logical volumes or data sets. The Hitachi Data Systems Hitachi Data Systems ...

. Global mirror periodically pauses updates of the primary volumes and swaps change recording bitmaps. It then uses the previous bitmap to drain updates from the primary volumes to the secondaries. After all primary updates have been drained, the secondary volumes are used as the source for a FlashCopy to tertiary volumes at the recovery site. This ensures that the tertiary copy of the volumes has point-in-time consistency. By grouping many volumes into one Global Mirror session multiple volumes may be copied to the recovery site simultaneously while maintaining point-in-time consistency across those volumes. Global Mirror can be combined with a

wide area network A wide area network (WAN) is a telecommunications network that extends over a large geographic area. Wide area networks are often established with leased telecommunication circuits. Businesses, as well as schools and government entities, u ...

clustering product like Geographically Dispersed Parallel Sysplex (GDPS), HACMP/XD, or IBM TotalStorage Continuous Availability for Windows to provide for automated failover between sites. This combined solution provides lower recovery time objective (RTO), because it allows most applications to automatically resume productive operation in 30–600 seconds. The Global Mirror function is available on IBM Storage devices including the DS8000 series (DS8100, DS8300, DS8700, DS8800, DS8870), the DS6800, the

Enterprise Storage Server The IBM Enterprise Storage Server (ESS) or the ''Shark'' is an enterprise storage array from IBM. History Originally, in 1998 IBM released the IBM 2105 Versatile Storage Server (VSS). It did not meet commercial success and the successor came in ...

Models 800 and 750, midrange storage servers V7000, DS4000 family, and the

IBM SAN Volume Controller The IBM SAN Volume Controller (SVC) is a block storage virtualization appliance that belongs to the IBM System Storage product family. SVC implements an indirection, or "virtualization", layer in a Fibre Channel storage area network (SAN). Arc ...

References

Storage software IBM storage software {{storage-software-stub