The Ganbare 35 is a Canadian

sailboat A sailboat or sailing boat is a boat propelled partly or entirely by sails and is smaller than a sailing ship. Distinctions in what constitutes a sailing boat and ship vary by region and maritime culture. Types Although sailboat terminology ...

that was designed by American Doug Peterson as an

International Offshore Rule The International Offshore Rule (IOR) was a measurement rule for racing sailboats. The IOR evolved from the Cruising Club of America (CCA) rule for racer/cruisers and the Royal Ocean Racing Club (RORC) rule. Rule context - past and present rating ...

One Ton class One Ton class was an offshore sailing class, which raced for the One Ton Cup, of the RORC 22 foot rule between 1965 and 1970, and then the International Offshore Rule between 1971 and 1994. The IOR rated length was 27.5' from 1971 to 1982, then ...

racer-

cruiser A cruiser is a type of warship. Modern cruisers are generally the largest ships in a fleet after aircraft carriers and amphibious assault ships, and can usually perform several roles. The term "cruiser", which has been in use for several hu ...

and first built in 1973. The Ganbare 35 is a development of the one-off Petersen-designed One Ton Cup racer ''Ganbare''. The name is derived from the Japanese term, meaning ''stand firm''.

Production

The design was built by

Cooper Enterprises Cooper Enterprises Inc. (sometimes referred to as Cooper Yachts Limited) was a Canadian boat builder based in Port Coquitlam, British Columbia. The company specialized in the design and manufacture of fibreglass sailboats and powerboats. The c ...

Port Coquitlam Port Coquitlam ( ) is a city in British Columbia, Canada. Located east of Vancouver, it is on the north bank of the confluence of the Fraser River and the Pitt River. Coquitlam borders it on the north, the Coquitlam River borders it on the west, ...

British Columbia British Columbia (commonly abbreviated as BC) is the westernmost province of Canada, situated between the Pacific Ocean and the Rocky Mountains. It has a diverse geography, with rugged landscapes that include rocky coastlines, sandy beaches, ...

and also by

Martin Yachts Martin may refer to: Places * Martin City (disambiguation) * Martin County (disambiguation) * Martin Township (disambiguation) Antarctica * Martin Peninsula, Marie Byrd Land * Port Martin, Adelie Land * Point Martin, South Orkney Islands Austral ...

, starting in 1973. A total of 35 boats were built before production ended.

Design

The Ganbare 35 is a racing

keelboat A keelboat is a riverine cargo-capable working boat, or a small- to mid-sized recreational sailing yacht. The boats in the first category have shallow structural keels, and are nearly flat-bottomed and often used leeboards if forced in open wat ...

, built predominantly of

fibreglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...

, with wood trim. It has a

masthead sloop A masthead rig on a sailing vessel consists of a forestay and backstay both attached at the top of the mast. The Bermuda rig can be split into two groups: the masthead rig and the fractional rig. The masthead rig has larger and more headsails, a ...

rig, a

raked stem The stem is the most forward part of a boat or ship's bow and is an extension of the keel itself. It is often found on wooden boats or ships, but not exclusively. Description The stem is the curved edge stretching from the keel below, up to ...

, a

reverse transom A transom is the vertical reinforcement which strengthens the stern of a boat. This flat termination of the stern is typically above the waterline. The term was used as far back as Middle English in the 1300s, having come from Latin ''transvers ...

, an internally mounted spade-type

rudder A rudder is a primary control surface used to steer a ship, boat, submarine, hovercraft, aircraft, or other vehicle that moves through a fluid medium (generally aircraft, air or watercraft, water). On an aircraft the rudder is used primarily to ...

controlled by a

tiller A tiller or till is a lever used to steer a vehicle. The mechanism is primarily used in watercraft, where it is attached to an outboard motor, rudder post or stock to provide leverage in the form of torque for the helmsman to turn the rudder. ...

and a fixed fin

keel The keel is the bottom-most longitudinal structural element on a vessel. On some sailboats, it may have a hydrodynamic and counterbalancing purpose, as well. As the laying down of the keel is the initial step in the construction of a ship, in Br ...

. It displaces and carries of lead ballast. The boat has a draft of with the standard keel. The boat is fitted with a Farymann A30M

diesel engine The diesel engine, named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel is caused by the elevated temperature of the air in the cylinder due to mechanical compression; thus, the diesel engine is a so-call ...

of for docking and manoeuvring. The fuel tank holds and the fresh water tank has a capacity of . The design has a

hull speed Hull speed or displacement speed is the speed at which the wavelength of a vessel's bow wave is equal to the waterline length of the vessel. As boat speed increases from rest, the wavelength of the bow wave increases, and usually its crest-to-tro ...

of .

Operational history

The boat is supported by an active class club that organizes racing events, the ''One Ton Class''.

References

{{Cooper Enterprises Keelboats 1970s sailboat type designs Sailing yachts Trailer sailers Sailboat type designs by Doug Peterson Sailboat types built by Cooper Enterprises Sailboat types built by Martin Yachts

Production

Design

Operational history

See also

References