Switched fabric or switching fabric is a

network topology Network topology is the arrangement of the elements ( links, nodes, etc.) of a communication network. Network topology can be used to define or describe the arrangement of various types of telecommunication networks, including command and contro ...

in which network

nodes In general, a node is a localized swelling (a "knot") or a point of intersection (a Vertex (graph theory), vertex). Node may refer to: In mathematics *Vertex (graph theory), a vertex in a mathematical graph *Vertex (geometry), a point where two ...

interconnect via one or more

network switch A network switch (also called switching hub, bridging hub, and, by the IEEE, MAC bridge) is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device. A netw ...

es (particularly

crossbar switch In electronics and telecommunications, a crossbar switch (cross-point switch, matrix switch) is a collection of switches arranged in a matrix configuration. A crossbar switch has multiple input and output lines that form a crossed pattern of int ...

es). Because a switched fabric network spreads

network traffic Network traffic or data traffic is the amount of data moving across a network at a given point of time. Network data in computer networks is mostly encapsulated in network packets, which provide the load in the network. Network traffic is the main c ...

across multiple physical links, it yields higher total

throughput Network throughput (or just throughput, when in context) refers to the rate of message delivery over a communication channel, such as Ethernet or packet radio, in a communication network. The data that these messages contain may be delivered ov ...

than broadcast networks, such as the early

10BASE5 10BASE5 (also known as thick Ethernet or thicknet) was the first commercially available variant of Ethernet. The technology was standardized in 1982 as IEEE 802.3. 10BASE5 uses a thick and stiff coaxial cable up to in length. Up to 100 stati ...

version of

Ethernet Ethernet () is a family of wired computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). It was commercially introduced in 1980 and first standardized in 198 ...

and most

wireless networks A wireless network is a computer network that uses wireless data connections between network nodes. Wireless networking is a method by which homes, telecommunications networks and business installations avoid the costly process of introducing c ...

such as

Wi-Fi Wi-Fi () is a family of wireless network protocols, based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio wave ...

. The generation of high-speed serial data interconnects that appeared in 2001–2004 which provided point-to-point connectivity between processor and

peripheral A peripheral or peripheral device is an auxiliary device used to put information into and get information out of a computer. The term ''peripheral device'' refers to all hardware components that are attached to a computer and are controlled by the ...

devices are sometimes referred to as fabrics; however, they lack features such as a

message-passing In computer science, message passing is a technique for invoking behavior (i.e., running a program) on a computer. The invoking program sends a message to a process (which may be an actor or object) and relies on that process and its supporting ...

protocol. For example,

HyperTransport HyperTransport (HT), formerly known as Lightning Data Transport, is a technology for interconnection of computer processors. It is a bidirectional serial/parallel high-bandwidth, low- latency point-to-point link that was introduced on April 2 ...

, the computer processor interconnect technology, continues to maintain a processor bus focus even after adopting a higher speed physical layer. Similarly,

PCI Express PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe or PCI-e, is a high-speed serial computer expansion bus standard, designed to replace the older PCI, PCI-X and AGP bus standards. It is the common ...

is just a serial version of PCI; it adheres to PCI's host/peripheral load/store

direct memory access Direct memory access (DMA) is a feature of computer systems and allows certain hardware subsystems to access main system memory independently of the central processing unit (CPU). Without DMA, when the CPU is using programmed input/output, it is t ...

(DMA)-based architecture on top of a serial physical and link layer.

Fibre Channel

In the

Fibre Channel Fibre Channel (FC) is a high-speed data transfer protocol providing in-order, lossless delivery of raw block data. Fibre Channel is primarily used to connect computer data storage to servers in storage area networks (SAN) in commercial data cen ...

''Switched Fabric'' (''FC-SW-6'') topology, devices are connected to each other through one or more

Fibre Channel switch In the computer storage field, a Fibre Channel switch is a network switch compatible with the Fibre Channel (FC) protocol. It allows the creation of a Fibre Channel fabric, that is the core component of a storage area network (SAN). The fabric i ...

es. While this topology has the best

scalability Scalability is the property of a system to handle a growing amount of work by adding resources to the system. In an economic context, a scalable business model implies that a company can increase sales given increased resources. For example, a ...

of the three FC topologies (the other two are

Arbitrated Loop The arbitrated loop, also known as FC-AL, is a Fibre Channel topology in which devices are connected in a one-way loop fashion in a ring topology. Historically it was a lower-cost alternative to a fabric topology. It allowed connection of man ...

and point-to-point), it is the only one requiring switches, which are costly hardware devices. Visibility among devices (called ''nodes'') in a fabric is typically controlled with

Fibre Channel zoning In storage networking, Fibre Channel zoning is the partitioning of a Fibre Channel fabric into smaller subsets to restrict interference, add security, and to simplify management. While a SAN makes available several devices and/or ports to a sin ...

. Multiple switches in a fabric usually form a

mesh network A mesh network is a local area network topology in which the infrastructure nodes (i.e. bridges, switches, and other infrastructure devices) connect directly, dynamically and non-hierarchically to as many other nodes as possible and cooperate wit ...

, with devices being on the "edges" ("leaves") of the mesh. Most Fibre Channel network designs employ two separate fabrics for redundancy. The two fabrics share the edge nodes (devices), but are otherwise unconnected. One of the advantages of such setup is capability of

failover Failover is switching to a redundant or standby computer server, system, hardware component or network upon the failure or abnormal termination of the previously active application, server, system, hardware component, or network in a computer net ...

, meaning that in case one link breaks or a fabric goes out of order,

datagram A datagram is a basic transfer unit associated with a packet-switched network. Datagrams are typically structured in header and payload sections. Datagrams provide a connectionless communication service across a packet-switched network. The del ...

s can be sent via the second fabric. The fabric topology allows the connection of up to the theoretical maximum of about 16 million devices, limited only by the available address space (2²⁴). 239 domains * 256 areas * 256 ports = 15,663,104

References

External links

What is a Switch Fabric
{{Network topologies Fibre Channel Network topology

Fibre Channel

See also

References

External links