Fresnel Integrals (Unnormalised)

250px,
Plots of and . The maximum of is about . If the integrands of and were defined using instead of , then the image would be scaled vertically and horizontally (see below).

The Fresnel integrals and are two transcendental functions named after Augustin-Jean Fresnel that are used in optics and are closely related to the error function (). They arise in the description of near-field Fresnel diffraction phenomena and are defined through the following integral representations:
$S(x) = \int_0^x \sin\left(t^2\right)\,dt, \quad C(x) = \int_0^x \cos\left(t^2\right)\,dt.$

The simultaneous parametric plot of and is the Euler spiral (also known as the Cornu spiral or clothoid).

Definition

250px,
Fresnel integrals with arguments instead of converge to instead of .
The Fresnel integrals admit the following power series expansions that converge for all :
$\begin S(x) &= \int_0^x \sin\left(t^2\right)\,dt = \sum_^(-1)^n \frac, \\ C(x) &= \int_0^x \cos\left(t^2\right)\,dt = \sum_^(-1)^n \frac. \end$

Some widely used tables use instead of for the argument of the integrals defining and . This changes their limits at infinity from to and the arc length for the first spiral turn from to 2 (at ). These alternative functions are usually known as normalized Fresnel integrals.

Euler spiral

The Euler spiral of against . The Cornu spiral was created by Marie Alfred Cornu as a nomogram for diffraction computations in science and engineering.

From the definitions of Fresnel integrals, the infinitesimals and are thus:
$\begin dx &= C'(t)\,dt = \cos\left(t^2\right)\,dt, \\ dy &= S'(t)\,dt = \sin\left(t^2\right)\,dt. \end$

Thus the length of the spiral measured from the origin can be expressed as
$L = \int_0^ \sqrt = \int_0^ dt = t_0.$

That is, the parameter is the curve length measured from the origin , and the Euler spiral has infinite length. The vector also expresses the unit tangent vector along the spiral, giving . Since is the curve length, the curvature can be expressed as
$\kappa = \frac = \frac = 2t.$

Thus the rate of change of curvature with respect to the curve length is
$\frac = \frac = 2.$

An Euler spiral has the property that its curvature at any point is proportional to the distance along the spiral, measured from the origin. This property makes it useful as a transition curve in highway and railway engineering: if a vehicle follows the spiral at unit speed, the parameter in the above derivatives also represents the time. Consequently, a vehicle following the spiral at constant speed will have a constant rate of angular acceleration.

Sections from Euler spirals are commonly incorporated into the shape of rollercoaster loops to make what are known as clothoid loops.

Properties

and are odd functions of ,

$C(-x) = -C(x), \quad S(-x) = -S(x).$

Asymptotics of the Fresnel integrals as are given by the formulas:

\begin
S(x) & =\sqrt \sgn x - \left 1 + O\left(x^\right) \right\left( \frac + \frac \right), \\ pxC(x) & =\sqrt \sgn x + \left 1 + O\left(x^\right) \right\left( \frac - \frac \right) .
\end

Using the power series expansions above, the Fresnel integrals can be extended to the domain of complex numbers, where they become analytic functions of a complex variable.

and are entire functions of the complex variable .

The Fresnel integrals can be expressed using the error function as follows:

\begin
S(z) & =\sqrt \cdot\frac \left \operatorname\left(\fracz\right) -i \operatorname\left(\fracz\right) \right \\ pxC(z) & =\sqrt \cdot\frac \left \operatorname\left(\fracz\right) + i \operatorname\left(\fracz\right) \right
\end

or

\begin
C(z) + i S(z) & = \sqrt\cdot\frac \operatorname\left(\fracz\right), \\ pxS(z) + i C(z) & = \sqrt\cdot\frac \operatorname\left(\fracz\right).
\end

Limits as approaches infinity

The integrals defining and cannot be evaluated in the closed form in terms of elementary functions, except in special cases. The limits of these functions as goes to infinity are known:
$\int_0^\infty \cos \left(t^2\right)\,dt = \int_0^\infty \sin \left(t^2\right) \, dt = \frac = \sqrt \approx 0.6267.$

This can be derived with any one of several methods. One of themAnother method based on parametric integration is described for example in . uses a contour integral of the function $e^$ around the boundary of the sector-shaped region in the complex plane formed by the positive -axis, the bisector of the first quadrant with , and a circular arc of radius centered at the origin.

As goes to infinity, the integral along the circular arc tends to
$\left, \int_e^\,dz\ = \left, \int_0^\frace^\,Re^dt\ \leq R\int_0^\frace^\,dt \leq R\int_0^\frace^\,dt = \frac\left(1-e^\right),$
where polar coordinates were used and Jordan's inequality was utilised for the second inequality. The integral along the real axis tends to the half Gaussian integral
$\int_ e^ \, dz = \int_0^\infty e^ \, dt = \frac.$

Note too that because the integrand is an entire function on the complex plane, its integral along the whole contour is zero. Overall, we must have
$\int_ e^ \, dz = \int_ e^ \, dz = \int_0^\infty e^ \, dt,$
where denotes the bisector of the first quadrant, as in the diagram. To evaluate the left hand side, parametrize the bisector as
$z = te^ = \frac(1 + i)t$
where ranges from 0 to . Note that the square of this expression is just . Therefore, substitution gives the left hand side as
$\int_0^\infty e^\frac(1 + i) \, dt.$

Using Euler's formula to take real and imaginary parts of gives this as
\begin
& \int_0^\infty \left(\cos\left(t^2\right) - i\sin\left(t^2\right)\right)\frac(1 + i) \, dt \\ px&\quad = \frac \int_0^\infty \left cos\left(t^2\right) + \sin\left(t^2\right) + i \left(\cos\left(t^2\right) - \sin\left(t^2\right)\right) \right\, dt \\ px&\quad = \frac + 0i,
\end
where we have written to emphasize that the original Gaussian integral's value is completely real with zero imaginary part. Letting
$I_C = \int_0^\infty \cos\left(t^2\right) \, dt, \quad I_S = \int_0^\infty \sin\left(t^2\right) \, dt$
and then equating real and imaginary parts produces the following system of two equations in the two unknowns and :
$\begin I_C + I_S & = \sqrt, \\ I_C - I_S & = 0. \end$

Solving this for and gives the desired result.

Generalization

The integral
$\int x^m e^\,dx = \int\sum_^\infty\frac\,dx = \sum_^\infty \frac\frac$
is a confluent hypergeometric function and also an incomplete gamma function
\begin
\int x^m e^\,dx & =\frac\,_1F_1\left(\begin \frac\\1+\frac\end\mid ix^n\right) \\ px& =\frac i^\frac\gamma\left(\frac,-ix^n\right),
\end
which reduces to Fresnel integrals if real or imaginary parts are taken:
$\int x^m\sin(x^n)\,dx = \frac \,_1F_2\left(\begin\frac+\frac\\ \frac+\frac,\frac\end\mid -\frac\right).$
The leading term in the asymptotic expansion is
$_1F_1 \left(\begin\frac\\1+\frac \end\mid ix^n\right)\sim \frac\,\Gamma\left(\frac\right) e^ x^,$
and therefore
$\int_0^\infty x^m e^\,dx = \frac \,\Gamma\left(\frac\right)e^.$

For , the imaginary part of this equation in particular is
$\int_0^\infty\sin\left(x^a\right)\,dx = \Gamma\left(1+\frac \right) \sin\left(\frac\right),$
with the left-hand side converging for and the right-hand side being its analytical extension to the whole plane less where lie the poles of .

The Kummer transformation of the confluent hypergeometric function is
$\int x^m e^\,dx = V_(x)e^,$
with
$V_ := \frac\,_1F_1\left(\begin 1 \\ 1 + \frac \end\mid -ix^n\right).$

Numerical approximation

For computation to arbitrary precision, the power series is suitable for small argument. For large argument, asymptotic expansions converge faster. Continued fraction methods may also be used.

For computation to particular target precision, other approximations have been developed. Cody developed a set of efficient approximations based on rational functions that give relative errors down to . A FORTRAN implementation of the Cody approximation that includes the values of the coefficients needed for implementation in other languages was published by van Snyder. Boersma developed an approximation with error less than .

Applications

The Fresnel integrals were originally used in the calculation of the electromagnetic field intensity in an environment where light bends around opaque objects. More recently, they have been used in the design of highways and railways, specifically their curvature transition zones, see track transition curve. Other applications are rollercoasters or calculating the transitions on a velodrome track to allow rapid entry to the bends and gradual exit.

Gallery

File:Plot of the Fresnel integral function S(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D.svg, Plot of the Fresnel integral function S(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D
File:Plot of the Fresnel integral function C(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D.svg, Plot of the Fresnel integral function C(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D
File:Plot of the Fresnel auxillary function G(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D.svg, Plot of the Fresnel auxillary function G(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D
File:Plot of the Fresnel auxillary function F(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D.svg, Plot of the Fresnel auxillary function F(z) in the complex plane from -2-2i to 2+2i with colors created with Mathematica 13.1 function ComplexPlot3D

See also

* Böhmer integral
* Fresnel zone
* Track transition curve
* Euler spiral
* Zone plate
* Dirichlet integral

Notes

References

*
*
*
*
*
*
*
*
* (Uses instead of .)
*
*
*
*
*
*

External links

Cephes
free/open-source C++/C code to compute Fresnel integrals among other special functions. Used in SciPy and ALGLIB.
Faddeeva Package
free/open-source C++/C code to compute complex error functions (from which the Fresnel integrals can be obtained), with wrappers for Matlab, Python, and other languages.
*
*
*
*
{{Nonelementary Integral
Integral calculus
Spirals
Physical optics
Special functions
Special hypergeometric functions
Analytic functions
Diffraction