In
radio engineering
Broadcast engineering is the field of electrical engineering, and now to some extent computer engineering and information technology, which deals with radio and television broadcasting. Audio engineering and RF engineering are also essential ...
, a frequency offset is an intentional slight
shift of broadcast
radio frequency
Radio frequency (RF) is the oscillation rate of an alternating electric current or voltage or of a magnetic, electric or electromagnetic field or mechanical system in the frequency range from around to around . This is roughly between the upp ...
(RF), to reduce
interference
Interference is the act of interfering, invading, or poaching. Interference may also refer to:
Communications
* Interference (communication), anything which alters, modifies, or disrupts a message
* Adjacent-channel interference, caused by extr ...
with other transmitters.
Interference
The most important problem encountered in broadcasting via terrestrial transmitters is the interference from other broadcasters. In principle, each broadcaster has a different radio frequency (planned by the public authority) in a common reception area to avoid interference from each other. However still there are two problems: spurious radiation of adjacent channels and fringe reception.
Fringe reception
A broadcast range (also listening range or listening area for radio, or viewing range or viewing area for television) is the service area that a broadcast station or other transmission covers via radio waves (or possibly infrared light, which ...
is unintended reception under certain weather conditions. The exceptionally long-range reception means that the receiver may be tuned to more than one transmitter (transmitting at same frequency) at the same time. These transmitters may transmit programs of different broadcasters as well as the programs of the same broadcaster. In analogue transmission, even the transmitters transmitting the very same program interfere each other because of phase differences of the incoming
signal
In signal processing, a signal is a function that conveys information about a phenomenon. Any quantity that can vary over space or time can be used as a signal to share messages between observers. The ''IEEE Transactions on Signal Processing'' ...
, but in
digital
Digital usually refers to something using discrete digits, often binary digits.
Technology and computing Hardware
*Digital electronics, electronic circuits which operate using digital signals
**Digital camera, which captures and stores digital i ...
transmission the transmitters transmitting the same program in the same channel may reinforce each other.
The shift in RF
In order to reduce the interference from the fringe area transmitters transmitting in the same channels, a method named frequency offset is often used. By this method, a slightly shifted RF is assigned for a transmitter which may experience interference from other transmitters.
In TV transmission, the shifted RF is calculated by the formula;
:
where,
:
is the offset RF,
:
is the standard channel frequency,
:
is an integer such that