Freight Transport Companies

Cargo consists of bulk goods conveyed by water, air, or land. In economics, freight is cargo that is transported at a freight rate for commercial gain. ''Cargo'' was originally a shipload but now covers all types of freight, including transport by rail, van, truck, or intermodal container. The term cargo is also used in case of goods in the cold-chain, because the perishable inventory is always in transit towards a final end-use, even when it is held in cold storage or other similar climate-controlled facility. The term freight is commonly used to describe the movements of flows of goods being transported by any mode of transportation.

Multi-modal container units, designed as reusable carriers to facilitate unit load handling of the goods contained, are also referred to as cargo, especially by shipping lines and logistics operators. Similarly, aircraft ULD boxes are also documented as cargo, with an associated packing list of
the items contained within. When empty containers are shipped each unit is documented as a cargo and when goods are stored within, the contents are termed containerized cargo.

Description

Transportation types: Cargo can travel via many different modes:

Marine

Seaport terminals handle a wide range of maritime cargoes.

Break bulk / general cargo are goods that are handled and stowed piecemeal to some degree, as opposed to cargo in bulk or in modern shipping containers. Typically bundled in batches for hoisting, either with cargo nets, slings, crates, or stacked on trays, pallets or skids; at best (and today mostly) lifted directly into and out of a vessel's holds, but otherwise onto and off its deck, by cranes or derricks present on the dock or on the ship itself. If hoisted on deck instead of straight into the hold, liftable or rolling unit loads, like bags, barrels/vats, boxes, cartons and crates, then have to be man-handled and stowed competently by stevedores. Securing break bulk and general freight inside a vessel, includes the use of dunnage. When no hoisting equipment available, break bulk would previously be man-carried on and off ship, over a plank, or by passing via human chain. Since the 1960s, the volume of break bulk cargo has enormously declined worldwide in favor of mass adoption of containers.
Bulk cargo, such as salt, oil, tallow, but also scrap metal, is usually defined as commodities that are neither on pallets nor in containers. Bulk cargoes are not handled as individual pieces, the way heavy-lift and project cargoes are. Alumina, grain, gypsum, logs, and wood chips, for instance, are bulk cargoes. Bulk cargo is classified as liquid or dry.

Air

Air cargo, commonly known as ''air freight'', is collected by firms from shippers and delivered to customers. Aircraft were first used for carrying mail as cargo in 1911. Eventually manufacturers started designing aircraft for other types of freight as well.

There are many commercial aircraft suitable for carrying cargo such as the Boeing 747 and the bigger An‑124, which was purposely built for easy conversion into a cargo aircraft. Such large aircraft employ standardized quick-loading containers known as unit load devices (ULDs), comparable to ISO containers on cargo ships. ULDs can be stowed in the lower decks (front and rear) of a number of wide-body aircraft, and on the main deck of some narrow-bodies. Some dedicated cargo planes have a large opening front for loading.

Most nations own and utilize large numbers of military cargo aircraft such as the C‑17 Globemaster III for logistical needs.

Popular commercial aircraft transformed to a cargo aircraft such as Saab 340A is designed for high revenue and profitability in short / medium haul operations.

Precious Cargo: Precious Cargo refers to the shipping of valuables like gems and jewellery safely. In today's changing times there are many companies that specialise in dealing with such shipments.

Air freight

Air freight shipments are very similar to LTL shipments in terms of size and packaging requirements. However, air freight or air cargo shipments typically need to move at much faster speeds than per hour. Air shipments may be booked directly with the carriers, through brokers or with online marketplace services. While shipments move faster than standard LTL, air shipments don't always actually move by air. In the US, there are certain restrictions on shipments moving via air freight on passenger aircraft. Shippers in the US must be approved and be "known" in the Known Shipper Management System before their shipments can be tendered on passenger aircraft.

Rail

Trains are capable of transporting a large number of containers that come from shipping ports. Trains are also used for the transportation of water, cement, grain, steel, wood and coal. They are used because they can carry a large amount and generally have a direct route to the destination. Under the right circumstances, freight transport by rail is more economic and energy efficient than by road, especially when carried in bulk or over long distances.

The main disadvantage of rail freight is its lack of flexibility. For this reason, rail has lost much of the freight business to road transport. Rail freight is often subject to transshipment costs, since it must be transferred from one mode of transportation to another. Practices such as containerization aim at minimizing these costs. When transporting point-to-point bulk loads such as cement or grain, with specialised bulk handling facilities at the rail sidings, rail mode of transport remains the most convenient and preferred option.

Many governments are currently trying to encourage shippers to use trains more often because of the environmental benefits.

Road

Many firms, like Parcelforce, FedEx and R+L Carriers transport all types of cargo by road. Delivering everything from letters to houses to cargo containers, these firms offer fast, sometimes same-day, delivery.

A good example of road cargo is food, as supermarkets require deliveries daily to replenish their shelves with goods. Retailers and manufacturers of all kinds rely upon delivery trucks, be they full size semi trucks or smaller delivery vans. These smaller road haulage companies constantly strive for the best routes and prices to ship out their products. Indeed, the level of commercial freight transported by smaller businesses is often a good barometer of healthy economic development as it is these types of vehicles that move and transport literally anything, including couriers transporting parcel and mail.
You can see the different types and weights of vehicles that are used to move cargo around .

Less-than-truckload freight

Less than truckload (LTL) cargo is the first category of freight shipment, which represents the majority of freight shipments and the majority of business-to-business (B2B) shipments. LTL shipments are also often referred to as ''motor freight'' and the carriers involved are referred to as ''motor carriers''.

LTL shipments range from , being less than the majority of times. The average single piece of LTL freight is and the size of a standard pallet. Long freight and/or large freight are subject to extreme length and cubic capacity surcharges.

Trailers used in LTL can range from . The standard for city deliveries is usually . In tight and residential environments the trailer is used the most.

The shipments are usually palletized, stretch hrinkwrapped and packaged for a mixed-freight environment. Unlike express or parcel, LTL shippers must provide their own packaging, as carriers do not provide any packaging supplies or assistance. However, circumstances may require crating or other substantial packaging.

Truckload freight

In the United States, shipments larger than about are typically classified as truckload (TL) freight. This is because it is more efficient and economical for a large shipment to have exclusive use of one larger trailer rather than share space on a smaller LTL trailer.

By the Federal Bridge Gross Weight Formula the total weight of a loaded truck (tractor and trailer, 5-axle rig) cannot exceed in the United States. In ordinary circumstances, long-haul equipment will weigh about , leaving about of freight capacity. Similarly a load is limited to the space available in the trailer, normally or long, wide, high and high over all.

While express, parcel and LTL shipments are always intermingled with other shipments on a single piece of equipment and are typically reloaded across multiple pieces of equipment during their transport, TL shipments usually travel as the only shipment on a trailer. In fact, TL shipments usually deliver on exactly the same trailer as they are picked up on.

Shipment categories

* the type of item being carried. For example, a kettle could fit into the category 'household goods'.
* how large the shipment is, in terms of both item size and quantity.
* how long the item for delivery will be in transit.

* '' Household goods (HHG)'' include furniture, art and similar items.
* ''Express:'' Very small business or personal items like envelopes are considered ''overnight express'' or ''express letter shipments''. These shipments are rarely over a few kilograms or pounds and almost always travel in the carrier's own packaging. Express shipments almost always travel some distance by air. An envelope may go coast to coast in the United States overnight or it may take several days, depending on the service options and prices chosen by the shipper.
* ''Parcel:'' Larger items like small boxes are considered ''parcels'' or ''ground shipments''. These shipments are rarely over , with no single piece of the shipment weighing more than about . Parcel shipments are always boxed, sometimes in the shipper's packaging and sometimes in carrier-provided packaging. Service levels are again variable but most ground shipments will move about per day. Depending on the origin of the package, it can travel from coast to coast in the United States in about four days. Parcel shipments rarely travel by air and typically move via road and rail. Parcels represent the majority of business-to-consumer (B2C) shipments.
* ''Freight:'' Beyond HHG, express, and parcel shipments, movements are termed ''freight shipments''.

Shipping costs

Often, an LTL shipper may realize savings by utilizing a freight broker, online marketplace or other intermediary, instead of contracting directly with a trucking company. Brokers can shop the marketplace and obtain lower rates than most smaller shippers can obtain directly. In the LTL marketplace, intermediaries typically receive 50% to 80% discounts from published rates, where a small shipper may only be offered a 5% to 30% discount by the carrier. Intermediaries are licensed by the DOT and have requirements to provide proof of insurance.

Truckload (TL) carriers usually charge a rate per kilometre or mile. The rate varies depending on the distance, geographic location of the delivery, items being shipped, equipment type required, and service times required. TL shipments usually receive a variety of surcharges very similar to those described for LTL shipments above. In the TL market, there are thousands more small carriers than in the LTL market. Therefore, the use of transportation intermediaries or brokers is extremely common.

Another cost-saving method is facilitating pickups or deliveries at the carrier's terminals. By doing this, shippers avoid any accessorial fees that might normally be charged for liftgate, residential pickup/ delivery, inside pickup/delivery, or notifications/appointments. Carriers or intermediaries can provide shippers with the address and phone number for the closest shipping terminal to the origin and/or destination.

Shipping experts optimize their service and costs by sampling rates from several carriers, brokers and online marketplaces. When obtaining rates from different providers, shippers may find a wide range in the pricing offered. If a shipper in the United States uses a broker, freight forwarder or other transportation intermediary, it is common for the shipper to receive a copy of the carrier's Federal Operating Authority. Freight brokers and intermediaries are also required by Federal Law to be licensed by the Federal Highway Administration. Experienced shippers avoid unlicensed brokers and forwarders because if brokers are working outside the law by not having a Federal Operating License, the shipper has no protection in the event of a problem. Also, shippers normally ask for a copy of the broker's insurance certificate and any specific insurance that applies to the shipment.

Overall, shipping costs have fallen over the past decades. A further drop in shipping costs in the future might be realized through the application of improved 3D printing technologies. 

Security concerns

Governments are very concerned with the shipment of cargo, as it may bring security risks to a country. Therefore, many governments have enacted rules and regulations, administered by a customs agency, to the handling of cargo to minimize risks of terrorism and other crime. Governments are particularly concerned with cargo entering through a country's borders.

The United States has been one of the leaders in securing cargo. They see cargo as a concern to national security. After the terrorist attacks of September 11th, the security of this magnitude of cargo has become highlighted on the over 6 million cargo containers enter the United States ports each year. The latest US Government response to this threat is the CSI: Container Security Initiative. CSI is a program intended to help increase security for containerised cargo shipped to the United States from around the world. Europe is also focusing on this issue, with a number of EU-funded projects underway.

Stabilization

There are many different ways and materials available to stabilize and secure cargo in various modes of transport. Conventional load securing methods and materials such as steel strapping and plastic/wood blocking & bracing have been used for decades and are still widely used. Present load securing methods offer several other options including polyester strapping and lashing, synthetic webbings and dunnage bags, also known as air bags or inflatable bags.

Practical advise on stabilization is given in the International Guidelines on Safe Load Securing for Road Transport.

Image:Stabilizing_capabilities_Cordstrap_dunnage_bags.jpg, Application in container
Image:Lashing_and_dunnage_bag_application.JPG, Polyester strapping and dunnage bag
Image:Lashing_application_flat_rack.jpg, Polyester lashing
Image:Amphorae stacking.jpg, Bronze Age amphorae from shipwrecks near Bodrum, Turkey, with rack and roping device illustrating how they might have been kept from shifting

See also

* Cargo airline
* Cargo cult
* Cargo sampling
* Cargo scanning
* Counter-to-counter package
* DAT Solutions (a.k.a. Dial-a-truck)
* Delivery
* Document automation in management
* Freight company
* Freight Transport Association
* Goods
* Goods train
* List of cargo types
* Products
* Standard Carrier Alpha Codes

References

Reference bibliography

**

External links

*
Freight Hashemibar

*

{{Portal bar, Aviation, Trains, Transport, Space exploration/Featured/December 2006 , Underwater diving

Freight transport
Transport law
Goods (economics)