Final approach (aviation)

In aeronautics, the final approach (also called the final leg and final approach leg) is the last leg in an aircraft's approach to landing, when the aircraft is lined up with the runway and descending for landing.Crane, Dale: ''Dictionary of Aeronautical Terms, third edition'', page 213 and 241. Aviation Supplies & Academics, 1997. In aviation radio terminology, it is often shortened to "final".

In a standard airport landing pattern, which is usually used under visual meteorological conditions (VMC), aircraft turn from base leg to final within one-half to two miles of the airport. For instrument approaches, as well as approaches into a controlled airfield under visual flight rules (VFR), often a "straight-in" final approach is used, where all the other legs are dispensed with. Straight-in approaches are discouraged at non-towered airports in the United States.

Approach slope

An approach slope is the path that an airplane follows on its final approach to land on a runway. It takes its name from the fact that this path is ideally a gentle downward slope. A commonly used approach slope is 3° from the horizontal. However, certain airports have steeper approach paths based on topography, buildings, or other considerations. London City Airport, for example, has a 5.5° approach, and only aircraft that can maintain such an approach are permitted to use the airport.

The term glide slope is often applied to mean approach slope although to be correct, glide slope applies to the vertical guidance element of the Instrument Landing System.

Final Approach Fix (FAF) and Final Approach Point (FAP)

ICAO operating procures describe the Final Approach segment as being the segment beginning at the Final Approach Fix/Point (FAF/FAP) and ending at the missed approach point (MAPt). The Final Approach Fix (FAF) being a co-located navigational aid beacon (e.g. a Non-directional beacon), or known distance to a beacon (typically located at the aerodrome), which would identify the point for final approach to be commenced by the flying crew. The Final Approach Point (FAP) describes an equivalent point for a precision approach, where intermediate approach segment intercepts the glideslope of an Instrument landing system.

Under ICAO, The FAF and FAP are two different concepts, representing potentially two different altitude-distance points from the MAPt for different approaches to the same runway. However, the FAF and FAP share the same definition as being the point at which the Final Approach segment is commenced. For example, the FAF for the VOR+DME approach to Runway 10 at Alicante Airport is at 3600 feet and 9.5nm from the Alicante VOR/DME ("ATE") - whereas the FAP for the ILS approach to Runway 10 at the same airport is at 3300 feet and 9.5nm from the ILS/DME.

Pragmatically, in an aviation world becoming less reliant on traditional navigational aid beacons, the FAF and FAP have become to be known as the same thing - accordingly, approach plates tend to mark the FAF/FAP with same symbol, typically with a cross symbol such as maltese cross or cross potent.

For example, in the United States, the final approach fix (FAF) is marked on a NACO IAP by a lightning bolt symbol and on a Jeppesen terminal chart by the end of the glide slope path symbol. It is the point in space where the final approach segment begins on the instrument approach. The final approach point is a point on a non-precision approach and is marked by a maltese cross symbol. In the United States, where the approach navigation aid is on the field and there is no symbol depicted, the final approach point is "where the aircraft is established inbound on the final approach course from the procedure turn and where the final approach descent may be commenced".

References

External links

*

{{Flight phases

Flight phases
*