Filter Factor
   HOME

TheInfoList



OR:

In
photography Photography is the art, application, and practice of creating durable images by recording light, either electronically by means of an image sensor, or chemically by means of a light-sensitive material such as photographic film. It is employed ...
, filter factor refers to the multiplicative amount of light a filter blocks.


Converting between filter factors and stops

The table below illustrates the relationship between filter factor, the amount of light that is allowed through the filter, and the number of
stops Stop may refer to: Places *Stop, Kentucky, an unincorporated community in the United States * Stop (Rogatica), a village in Rogatica, Republika Srpska, Bosnia and Herzegovina Facilities * Bus stop * Truck stop, a type of rest stop for truck dri ...
this corresponds to.


Calculating exposure increase

The number of f-stops of light reduction, given a filter factor, may be calculated using the formula: \log_(filter factor) Most calculators do not have a \log_ function. An equivalent calculation is: \log_(filter factor) / \log_(2) or \ln(filter factor)/\ln(2) An example: A green filter with a filter factor of 4 \log_(4) = .602 \log_(2)=.301 .602/.301=2 The green filter factor of 4 yields a 2 f-stop light reduction. The filter factor, given the exposure change in f-stops, may be calculated using the formula: 2^ = filter factor An example: A deep red filter with an f-stop change of 3 stops 2^3=8 A change of 3 f-stops is equivalent to a filter factor of 8. As a consequence of this relationship, filter factors should be ''multiplied'' together when such filters are stacked, as opposed to stop adjustments, which should be added together.


Filter factors for common filters

The table below gives approximate filter factors for a variety of common photographic filters. It is important to note that filter factors are highly dependent on the spectral response curve of the film being used. Thus, filter factors provided by the film manufacturer should be preferred over the ones documented below. Furthermore, note well that these factors are for daylight color temperature (5600K); when shooting under a different color temperature of ambient light, these values will most likely be incorrect.


See also

* Filter (photography) *
Filter (optics) An optical filter is a device that selectively transmits light of different wavelengths, usually implemented as a glass plane or plastic device in the optical path, which are either dyed in the bulk or have interference coatings. The optical p ...
*
Wratten number Wratten numbers are a labeling system for optical filters, usually for photographic use comprising a number sometimes followed by a letter. The number denotes the color of the filter, but is arbitrary and does not encode any information (the 80 ...
*
Exposure (photography) In photography, exposure is the amount of light per unit area (the image plane's illuminance times the exposure time) reaching a frame of photographic film or the surface of an electronic image sensor, as determined by shutter speed, lens ...
* F-number


References

;Notes ;Further reading * Hoya Corporation, ''Filters for imaging'' * Cokin S.A., ''Cokin Creative Filter System'' {{DEFAULTSORT:Filter Factor Optical filters