HOME

TheInfoList



OR:

The Ferrari GTO (often referred to as Ferrari 288 GTO) (Type F114) is an exotic
homologation Homologation (Greek ''homologeo'', ὁμολογέω, "to agree") is the granting of approval by an official authority. This may be a court of law, a government department, or an academic or professional body, any of which would normally work fr ...
of the
Ferrari 308 GTB The Ferrari 308 GTB berlinetta and targa topped 308 GTS are V8 mid-engined, two-seater sports cars manufactured by the Italian company Ferrari from 1975 until 1985. The 308 replaced the Dino 246 GT and GTS in 1975 and was updated as the 328 GTB ...
produced from 1984 to 1987 in Ferrari's Maranello factory, designated GT for Gran Turismo and O for ''Omologata'' (homologated in Italian).


Background

Contrary to what is reported historically in the press, the Ferrari GTO was not immediately born to compete in the new 1982
Group B Group B was a set of regulations for grand touring (GT) vehicles used in sports car racing and rallying introduced in 1982 by the Fédération Internationale de l'Automobile (FIA). Although permitted to enter a GT class of the World Sportscar ...
Circuit Race series; Enzo Ferrari did not have overall control of the Road Car division, which was at the time managed by the General Director Eugenio Alzati and the FIAT MD (CEO) Vittorio Ghidella. In 1983 Mr Ferrari noted from discussions with close friends and clients that the road car sales were falling due to stronger competition from rival car makers and what he described as the "excessive gentrification" of the Ferrari model lineup.


Turbocharging: from F1 to road cars

The success of turbocharging in Formula 1 and the introduction of some new tax laws (above the 1999cc displacement threshold) had prompted Ferrari to first build the 208 Turbo and then discuss turbocharging also in 3 litre form for a road car which could produce 330 bhp. The first 208 turbo did not feature an intercooler so the performance and reliability was somewhat delicate due to high combustion temperatures. Ferrari approached the head of powertrain for the Gestione Sportiva (Racing Division), Nicola Materazzi, to give an opinion on the proposed specification for the new 3L turbo engine. Materazzi had joined from Osella in 1979 (before then at Lancia Reparto Corse) due to his experience with forced induction and had been involved in the 126 F1 car experimentation between Comprex and
turbo In an internal combustion engine, a turbocharger (often called a turbo) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake gas, forcing more air into the engine in order to pro ...
. When Materazzi showed confidence that 400 bhp could be reliably extracted from 3000cc (133 bhp/litre), Ferrari placed his trust in him on condition that it would deliver as promised. Ferrari also jokingly suggested that Materazzi work on the 268 engine destined for the Lancia LC2 Group C racing car, due to similarities in displacement and mechanical parts.


Development

The Ferrari F114B road-car engine and the Lancia 2.6L V8 race engine developments progressed closely, with some draughtsmen employed from Abarth to complete detail design on components for manufacture at times when the Ferrari draughtsmen were at full capacity. In order to improve overall performance, several key aspects of the original 308 vehicle layout were altered: the engine did not grow in displacement but was turbocharged, it remained mid-mounted but now longitudinally instead of transversely, the wheelbase was elongated by 200mm, the outer bodywork required modifications to maintain pleasing proportions. The car used water-cooled IHI turbochargers from Japan compared to the KKK turbochargers used in Formula 1 due to the better materials and aerodynamic internal designs which allowed faster transient response. IHI had bought patents from Swiss manufacturer Brown Boveri (Baden) that had supplied Ferrari with the Comprex systems. Some of the GTO's styling features were first displayed on a 308 GTB design exercise by
Pininfarina Pininfarina S.p.A. (short for Carrozzeria Pininfarina) is an Italian car design firm and coachbuilder, with headquarters in Cambiano, Turin, Italy. The company was founded by Battista "Pinin" Farina in 1930. On 14 December 2015, the Indian mu ...
shown at the 1977 Geneva Auto Salon. The 288 GTO had started out as a modified version of the 308/ 328 to hold down costs and to build the car quickly, but little of the 308/328 was left when the 288 GTO was finished. Fortunately Ferrari could count on customers who were loyal when it came to spending more if they could access performance and style that was unmatched, so the unplanned deviation from the original cost targets did not necessarily prove an issue. Easily noticeable differences were the GTOs bulging fender flares, larger front/rear spoilers, large "flag-style" outside mirrors and four driving lights at the far sides of the grille. Retained from the original 250 GTO were slanted air vents, put in the GTO's rear fenders to cool the brakes, as well as the rear wing's design, borrowed from the 250 GTO's original wing. The GTO also had wider body panels than the 308's because they had to cover much larger Goodyear tires mounted on racing wheels. The suspension's height could be set higher for road use and lower for racing on tracks. Bodywork material was new and lighter for better
acceleration In mechanics, acceleration is the rate of change of the velocity of an object with respect to time. Accelerations are vector quantities (in that they have magnitude and direction). The orientation of an object's acceleration is given by the ...
and handling. The GTO's weight was , compared to for the 308/328. Steel was used just for the doors because major body panels were made from molded
fiberglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass cloth ...
.
Kevlar Kevlar (para-aramid) is a strong, heat-resistant synthetic fiber, related to other aramids such as Nomex and Technora. Developed by Stephanie Kwolek at DuPont in 1965, the high-strength material was first used commercially in the early 1970s a ...
was used for the hood, and the roof was made from Kevlar and
carbon fiber Carbon fiber-reinforced polymers (American English), carbon-fibre-reinforced polymers (Commonwealth English), carbon-fiber-reinforced plastics, carbon-fiber reinforced-thermoplastic (CFRP, CRP, CFRTP), also known as carbon fiber, carbon compo ...
. Materazzi felt that with the latest road speed limits and stricter fines, it was increasingly harder for clients to really prove the potential of cars with high performance. Ferrari asked what was his proposal, to which he suggested returning to racing in the GT class, something which had been interrupted after the 512 BB LM. The overall permission to modify the GTO road car into the Evoluzione for a racing programme however had to be ratified by Eugenio Alzati. He permitted it on conditions that the engineers interested in the project work outside of the Monday to Friday timetable (which was dedicated for development of 328 and other models). The lessons learnt during the development of the engine for the Lancia LC2 could be applied to the racing version of the GTO, such as the carefully engineered conicity of the intake plenums to ensure accurately balanced air flow and pressure to each cylinder and the setup of the turbochargers to produce in excess of 650 bhp. The GTO Evoluzione included all the necessary modifications (bodywork, chassis, safety systems) to comply with the FIA regulations which permitted 20 cars per year to be specifically built for rally or track racing. Due to multiple deaths and the inherent danger involved with group B rally racing, the
Group B Group B was a set of regulations for grand touring (GT) vehicles used in sports car racing and rallying introduced in 1982 by the Fédération Internationale de l'Automobile (FIA). Although permitted to enter a GT class of the World Sportscar ...
Circuit series was suspended at the end of 1986. As a result, the GTO Evo never raced. All GTO road cars came in a stock red color, except one which was black. All GTO Evo cars came in red colour. Like any Ferrari car, the low production numbers for the GTO were intended to give an exclusive product for the enthusiast buyer. The number of GTO's produced did indeed fit in the minimum requirement of 200 required by the FIA and in fact the factory produced 70 more plus a couple extra to please the Agnelli family, an F1 driver or anybody else who the Commendatore predicted might insist on a last minute purchase option. Although the production car test team - headed by Dario Benuzzi - did not include any of the Formula 1 drivers,
Michele Alboreto Michele Alboreto (; 23 December 1956 – 25 April 2001) was an Italian racing driver. He was runner up to Alain Prost in the 1985 Formula One World Championship, as well as winning the 1997 24 Hours of Le Mans and 2001 12 Hours of Sebring spo ...
occasionally had involvement in giving feedback on cars such as the 288 GTO, and later the 328 Turbo and F40. In particular he agreed with Enzo Ferrari's return to a breed of cars which were much more fiery, describing the GTO as "cattiva" (angry) and praising its low engine centre of gravity compared to the Testarossa.


Engine

The GTO was based on the rear mid-engine, rear wheel drive 308 GTB, which has a V8. The "288" refers to the GTO's 2.8 litre
DOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion c ...
4 valves per
cylinder A cylinder (from ) has traditionally been a three-dimensional solid, one of the most basic of curvilinear geometric shapes. In elementary geometry, it is considered a prism with a circle as its base. A cylinder may also be defined as an infin ...
V8 engine A V8 engine is an eight-cylinder piston engine in which two banks of four cylinders share a common crankshaft and are arranged in a V configuration. The first V8 engine was produced by the French Antoinette company in 1904, developed and us ...
as it used a de-
bored In conventional usage, boredom, ennui, or tedium is an emotional and occasionally psychological state experienced when an individual is left without anything in particular to do, is listlessness and dissatisfaction arising from a lack of occup ...
by with
IHI Ihi, Ehee (Nepal Bhasa:ईही) is a ceremony in the Newar community in Nepal in which pre-adolescent girls are "married" to the Suvarna Kumar which is a symbol of the god Vishnu, ensuring that the girl becomes and remains fertile. It is bel ...
twin-turbo Twin-turbo (not to be confused with a twincharger setup, which is a combination of a supercharger and a turbocharger) refers to an engine in which two turbochargers work in tandem to compress the intake fuel/air mixture (or intake air, in the case ...
chargers,
Behr Behr is a given name and surname that derives from the German ''Bär'' (''bear''). Older forms of the name, ''Bela'' and ''Belo'' (related to the old High German ''Belo''), occur in the Memorbuch. The diminutive forms ''Baeril'' ''(Berel)'' and ' ...
air-to-air
intercooler An intercooler is a heat exchanger used to cool a gas after compression. Often found in turbocharged engines, intercoolers are also used in air compressors, air conditioners, refrigeration and gas turbines. Internal combustion engines Mo ...
s, Weber- Marelli
fuel injection Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by the means of an injector. This article focuses on fuel injection in reciprocating piston and Wankel rotary engines. All comp ...
and a
compression ratio The compression ratio is the ratio between the volume of the cylinder and combustion chamber in an internal combustion engine at their maximum and minimum values. A fundamental specification for such engines, it is measured two ways: the stati ...
of 7.6:1. The 2.85 litre
engine capacity Engine displacement is the measure of the cylinder volume swept by all of the pistons of a piston engine, excluding the combustion chambers. It is commonly used as an expression of an engine's size, and by extension as a loose indicator of the ...
was dictated by the
FIA FIA is the Fédération Internationale de l'Automobile (English: International Automobile Federation), the world's governing body for all forms of motor sport where four or more wheels are used. Fia or FIA may also refer to: People * Fia Backst ...
's requirement for a
turbocharged In an internal combustion engine, a turbocharger (often called a turbo) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake gas, forcing more air into the engine in order to pro ...
engine's capacity to be multiplied by 1.4. This gave the GTO an equivalent engine capacity of , just under the Group B limit of 4.0 litres. Unlike the 308's engine, the GTO's V8 was mounted longitudinally, using the 308's rear trunk space. This was necessary to make room for the twin turbochargers and intercoolers. The racing transmission was mounted to the rear of the
longitudinal engine In automotive engineering, a longitudinal engine is an internal combustion engine in which the crankshaft is oriented along the long axis of the vehicle, front to back. Use This type of motor is usually used for rear-wheel drive cars, except ...
, moving the rear differential and wheels aft. The arrangement also let the GTO use a more conventional race-car engine/transmission layout for such things as quick
gear-ratio A gear train is a mechanical system formed by mounting gears on a frame so the teeth of the gears engage. Gear teeth are designed to ensure the pitch circles of engaging gears roll on each other without slipping, providing a smooth transmission ...
changes for various tracks. As a result, the
wheelbase In both road and rail vehicles, the wheelbase is the horizontal distance between the centers of the front and rear wheels. For road vehicles with more than two axles (e.g. some trucks), the wheelbase is the distance between the steering (front ...
was longer at . The track was also widened to accommodate wider wheels and tires ( Goodyear NCT 225/55 VR16 tires mounted on 8 x 16 inch Speedline wheels at the front and 255/50 VR16 (265/50 VR16 for U.S. models) mounted on 10 x 16 inch wheels at the rear) to provide increased cornering and braking performance and the ability to apply at 7,000 rpm and of
torque In physics and mechanics, torque is the rotational equivalent of linear force. It is also referred to as the moment of force (also abbreviated to moment). It represents the capability of a force to produce change in the rotational motion of th ...
at 3,800 rpm. The GTO could accelerate from 0- in around 5 seconds and Ferrari claimed 0- in 15 seconds flat and a top speed of , making it one of the fastest street-legal production cars of its time.


288 GTO in North America

Ferrari did not "federalize" the 288 GTO for sale in America. Americans wanted the car anyway, and obtained it as a
grey import vehicle Grey import vehicles are new or used motor vehicles and motorcycles legally imported from another country through channels other than the maker's official distribution system. The synonymous term parallel import is sometimes substituted. Car make ...
.


Performance

Test results by ''
Road & Track ''Road & Track'' (stylized as ''R&T'') is an American automotive enthusiast magazine. It is owned by Hearst Magazines and is published 6 times per year. The editorial offices are located in New York, New York. History ''Road & Track'' (often ab ...
'': * 0–: 2.3 s * 0–: 4.1 s * 0–: 5.0 s * 0–: 6.2 s * 0–: 7.7 s * 0–: 11.0 s * 0–: 16.0 s * Standing : 14.1 s at * Top Speed:
Road & Track ''Road & Track'' (stylized as ''R&T'') is an American automotive enthusiast magazine. It is owned by Hearst Magazines and is published 6 times per year. The editorial offices are located in New York, New York. History ''Road & Track'' (often ab ...
July 1987 . Excerpt:


Evoluzione

Ferrari built six (five production models and one prototype) 288 GTO ''Evoluzione'' models with more aggressive and aerodynamic body styling and increased power. The Evoluzione, introduced in 1986, was built to race in
Group B Group B was a set of regulations for grand touring (GT) vehicles used in sports car racing and rallying introduced in 1982 by the Fédération Internationale de l'Automobile (FIA). Although permitted to enter a GT class of the World Sportscar ...
but when that series was cancelled the project was also shelved as it was not fit for any other racing series. Ferrari had planned a production run of 20 cars to comply with Group B homologation requirements for Evolution models. The ''288 GTO Evoluzione'' is powered by an upgraded version of the 2.9 L V8 used in the normal 288 GTO that has twin-turbochargers and produces at 7,800 rpm. It has a weight of around and can reach a top speed of . It features a unique front end designed for aerodynamics with front canards, channels and vents as well as a large carbon fibre rear spoiler and numerous large NACA ducts. Many styling and mechanical elements from the Evoluzione influenced the soon to follow F40. All six are thought to still be in existence with one owned by the Factory on display in the engine manufacturing facility in Maranello and another suspected to have been used as a prototype during the development of the F40.


Formula 1 GTO owners

Several Formula 1 drivers were offered GTOs by
Enzo Ferrari Enzo Anselmo Giuseppe Maria Ferrari (; 20 February 1898 – 14 August 1988) was an Italians, Italian motor racing driver and entrepreneur, the founder of the Scuderia Ferrari Grand Prix motor racing team, and subsequently of the Ferrari ...
. These include
Michele Alboreto Michele Alboreto (; 23 December 1956 – 25 April 2001) was an Italian racing driver. He was runner up to Alain Prost in the 1985 Formula One World Championship, as well as winning the 1997 24 Hours of Le Mans and 2001 12 Hours of Sebring spo ...
(56195),
Keke Rosberg Keijo Erik Rosberg (born 6 December 1948), known as "Keke" (), is a Finnish former racing driver and winner of the Formula One World Championship. He was the first Finnish driver to compete regularly in the series, as well as the first Finnish ...
(56653) and
Niki Lauda Andreas Nikolaus "Niki" Lauda (22 February 1949 – 20 May 2019) was an Austrian Formula One driver and aviation entrepreneur. He was a three-time Formula One World Drivers' Champion, winning in , and , and is the only driver in Formula ...
(58329), who was gifted the last of the 272 units built, by Enzo Ferrari himself. Michael Schumacher bought 54233 in April 1996 and drove it with number plate S GT 288.


Awards

In 2004, ''
Sports Car International ''Sports Car International'' (SCI) was an automobile magazine published in the United States from 1986 to 2008 by Ross Periodicals Inc, first in Newport Beach, but then later in Novato, California. History The magazine was unabashedly enthusiast ...
'' named this car number two on the list of Top Sports Cars of the 1980s, behind its German rival the
Porsche 959 The Porsche 959 is a sports car manufactured by German automobile manufacturer Porsche from 1986 to 1993, first as a Group B rally car and later as a road legal production car designed to satisfy FIA homologation regulations requiring at least 2 ...
.


References


Bibliography

* * *
Ferrari 288 GTO
at the Group B Rally Cars. {{DEFAULTSORT:Ferrari 288 Gto 288 Gto Rear mid-engine, rear-wheel-drive vehicles Group B cars Cars introduced in 1984 Sports cars