Fathom Lower

A fathom is a unit of length in the imperial and the U.S. customary systems equal to , used especially for measuring the depth of water. The fathom is neither an International Standard (SI) unit, nor an internationally-accepted non-SI unit. Historically, however, it is the most frequently employed maritime measure of depth in the English-speaking world.

There are two yards (6 feet) in an imperial fathom. Originally the span of a man's outstretched arms, the size of a fathom has varied slightly depending on whether it was defined as a thousandth of an (Admiralty) nautical mile or as a multiple of the imperial yard. Formerly, the term was used for any of several units of length varying around .

Name

The name (pronounced ) derives from the Old English word ''fæðm'', cognate to the Danish (via the Vikings) word "favn" meaning embracing arms or a pair of outstretched arms. Cognate maybe also via the Old High German word "fadum" of the same meaning.''Oxford English Dictionary'', second edition, 1989; In Middle English it was ''fathme''.

Forms

Ancient fathoms

The Ancient Greek measure known as the orguia ( grc-gre, ὀργυιά, ''orgyiá'', ."outstretched") is usually translated as "fathom". By the Byzantine period, this unit came in two forms: a "simple orguia" (, ''haplē orguiá'') roughly equivalent to the old Greek fathom (6 Byzantine feet, m) and an "imperial" (, ''basilikē'') or "geometric orguia" (, ''geōmetrikē orguiá'') that was one-eighth longer (6 feet and a span, m).

International fathom

One fathom is equal to:
* 1.8288 metres exactly (outside US)
* 1.828804 m (in the U.S. until 2023)
* 2 yards (1 yard is exactly fathom)
* 6 feet (1 foot is exactly fathom)
* 18 hands
* 72 inches
* 1 metre is about 0.5468 fathoms

In the international yard and pound agreement of 1959 the United States, Australia, Canada, New Zealand, South Africa, and the United Kingdom defined the length of the international yard to be exactly 0.9144 metre. In 1959 United States kept the US survey foot as definition for the fathom.

In October 2019, U.S. National Geodetic Survey and National Institute of Standards and Technology announced their joint intent to retire the U.S. survey foot, with effect from the end of 2022. The fathom in U.S. Customary units is thereafter defined based on the International 1959 foot, giving the length of the fathom as exact 1.8288 meters in the United States as well.

British fathom

The British Admiralty defined a fathom to be a thousandth of an imperial nautical mile (which was 6080 ft) or . In practice the "warship fathom" of exactly was used in Britain and the United States. No conflict between the definitions existed in practice, since depths on Imperial nautical charts were indicated in feet if less than and in fathoms for depths greater than that. Until the 19th century in England, the length of the fathom was more variable: from  feet on merchant vessels to either on fishing vessels (from ).Fenna (2000: 88-89)

Derived units

At one time, a quarter meant one-quarter of a fathom.

A cable length, based on the length of a ship's cable, has been variously reckoned as equal to 100 or 120 fathoms.

Use of the fathom

Water depth

Most modern nautical charts indicate depth in metres. However, the U.S. Hydrographic Office uses feet and fathoms. A nautical chart will always explicitly indicate the units of depth used.

To measure the depth of shallow waters, boatmen used a sounding line containing fathom points, some marked and others in between, called ''deeps'', unmarked but estimated by the user. Water near the coast and not too deep to be fathomed by a hand sounding line was referred to as ''in soundings'' or ''on soundings''. The area offshore beyond the 100 fathom line, too deep to be fathomed by a hand sounding line, was referred to as ''out of soundings'' or ''off soundings''. A ''deep-sea lead'', the heaviest of sounding leads, was used in water exceeding 100 fathoms in depth.

This technique has been superseded by sonic depth finders for measuring mechanically the depth of water beneath a ship, one version of which is the Fathometer (trademark). The record made by such a device is a fathogram. A fathom line or fathom curve, a usually sinuous line on a nautical chart, joins all points having the same depth of water, thereby indicating the contour of the ocean floor.

Some extensive flat areas of the sea bottom with constant depth are known by their fathom number, like the Broad Fourteens or the Long Forties, both in the North Sea.

Line length

The components of a commercial fisherman's setline were measured in fathoms. The rope called a ''groundline'', used to form the main line of a setline, was usually provided in bundles of 300 fathoms. A single skein of this rope was referred to as a ''line''. Especially in Pacific coast fisheries the setline was composed of units called ''skates'', each consisting of several hundred fathoms of groundline, with gangions and hooks attached. A ''tuck seine'' or ''tuck net'' about long, and very deep in the middle, was used to take fish from a larger seine.

A ''line'' attached to a whaling harpoon was about . A ''forerunner'' — a piece of cloth tied on a ship's log line some fathoms from the outboard end — marked the limit of drift line. A ''kite'' was a drag, towed under water at any depth up to about , which upon striking bottom, was upset and rose to the surface.

A ''shot'', one of the forged lengths of chain joined by shackles to form an anchor cable, was usually .

A ''shackle'', a length of cable or chain equal to . In 1949, the British navy redefined the shackle to be .

The Finnish fathom (''syli'') is occasionally used: nautical mile or cable length.

Burial

A burial at sea (where the body is weighted to force it to the bottom) requires a minimum of six fathoms of water. This is the origin of the phrase "''to deep six"'' as meaning to discard, or dispose of.

The phrase is echoed in Shakespeare's '' The Tempest'', where Ariel tells Ferdinand, " Full fathom five thy father lies".

On land

Until early in the 20th century, it was the unit used to measure the depth of mines (mineral extraction) in the United Kingdom. Miners also use it as a unit of area equal to 6 feet square (3.34 m²) in the plane of a vein. In Britain, it can mean the quantity of wood in a pile of any length measuring square in cross section. In Central Europe, the klafter was the corresponding unit of comparable length, as was the toise in France. In Hungary the square fathom (" négyszögöl") is still in use as an unofficial measure of land area, primarily for small lots suitable for construction.

See also

* Ancient Greek units of measurement
* Anthropic units
* Bathymetry
* English unit
* Hvat
* Imperial unit
* International System of Units
* United States customary units
* Sounding line
* Toise
* Klafter

References

Citations

Bibliography

*.

External links

{{Wiktionary

An explanation of the fathom marks used at sea
(retrieved Sept 2005).


Human-based units of measurement
Nautical terminology
Units of length
Customary units of measurement in the United States