The ''Evertsen'' class was a
class
Class or The Class may refer to:
Common uses not otherwise categorized
* Class (biology), a taxonomic rank
* Class (knowledge representation), a collection of individuals or objects
* Class (philosophy), an analytical concept used differentl ...
of
steam frigate
Steam frigates (including screw frigates) and the smaller steam corvettes, steam sloops, steam gunboats and steam schooners, were steam-powered warships that were not meant to stand in the line of battle. There were some exceptions like for exam ...
s of the
Royal Netherlands Navy
The Royal Netherlands Navy ( nl, Koninklijke Marine, links=no) is the naval force of the Kingdom of the Netherlands.
During the 17th century, the navy of the Dutch Republic (1581–1795) was one of the most powerful naval forces in the world an ...
. The class comprised ''Evertsen'' and ''Zeeland''
Dutch Naval Plans in the 1850s
Plan 1852: First reaction to the screw
The first coherent Dutch reaction to the appearance of screw driven warships was the plan 1852. It was a plan conceived by a commission of naval officers and augmented by the secretary for the navy. It led to orders to construct four ships in November 1852. These were: the screw frigate ''
Wassenaar
Wassenaar (; population: in ) is a municipality and town located in the province of South Holland, on the western coast of the Netherlands.
An affluent suburb of The Hague, Wassenaar lies north of that city on the N44/A44 highway near the Nort ...
'', the two screw corvettes of the
Medusa class, and one screw schooner (''Montrado''). This was a plan to ''start'' the construction of screw driven warships. When a second expensive screw frigate (the ''Evertsen'') was laid down in late 1854, the Dutch house of representatives was deeply worried by the apparent demise of the Dutch navy and the absence of a plan to make her effective again.
Plan 1855
On 8 February 1855
Smit van den Broecke became the new Dutch Secretary for the navy. In May 1855 Smit van den Broecke presented an overall plan for the fleet at home and in the East Indies. The heaviest ships of the new fleet would be 3 screw steam frigates of 400 hp, 50 guns and 500 men, to be stationed in the Netherlands. The standard fighting warship for the East Indies would be a screw corvette of 250 hp, 12 30-pounders and 125 men, of which 12 would be built. For policing the many outposts in the Indies 15 sloops of 100 hp, 12 guns and 85 men would be built. These would be supplemented by small paddle ships that would navigate rivers and shallow waters. The ships of the ''Evertsen'' class fitted the 400 hp screw frigates of this plan.
Characteristics of the Evertsen class
The ships of the ''Evertsen'' class were heavy frigates with auxiliary power. The prime objective of the designers of screw ships with auxiliary power was to create a steam ship with a full broadside. This led to screw frigates that were basically slightly longer versions of their sail only counterparts, the extra length being used for machinery and coal storage. Even so, the equivalent broadside was difficult to achieve. Weight had to be saved on engines and coal storage, and so these ships were intended to use their engines only in fights and emergencies, and to sail the rest of the time.
Design
The ''Evertsen'' class were the first frigates of the Dutch navy which were ''designed'' to have (auxiliary) steam power. At the time that the lead ship ''Evertsen'' was laid down the Dutch did not yet have a sailing frigate in commission, and therefore lacked any proof that either the previous lengthened sail frigate ''Wassenaar'' or the ''Evertsen'' would be successful. The ''Evertsen'' was only 1.14 meters longer than the previous ''Wassenaar'', i.e. 1.8%. The beam of the ''Evertsen'' was 1.4 meters wider, amounting to an almost 10% increase in beam. This sudden increase in width of the Dutch heavy frigates from 14.30 m to 15.70 m seems a strange development.
Lieutenant H. Huijgens was a teacher in steam engineering at the Naval Institute in
Medemblik
Medemblik () is a municipality and a town in the Netherlands, in the province of North Holland and the region of West-Frisia. It lies immediately south of the polder and former municipality of Wieringermeer.
History
Medemblik was a prosperous ...
. In 1847 he published an introduction to naval steam engineering (Dutch: Handleiding tot de kennis van het Scheeps-Stoomwerktuig). In 1852 he published: De Schroef (the Screw), a work about screw propulsion. In 1853 he published: De schroef-machine (the screw-machine). In the introduction to the screw-machine Huygens clearly states that before ordering the construction of screw-machines for the new warships with auxiliary power, the secretary for the navy ordered him to investigate the subject in England. The investigation was to concern which kind of machines and screws the English thought most effective, and what kind of improvements had been made to steam machines in recent times. The findings would give directions for equipping the ships with machines and screws, and aid in an attempt to make ships that were equal to foreign ships in every aspect. Later Huygens would repeat the investigation in company of the chief-engineer Tromp. Tromp was responsible for ship construction, Huygens for machinery. In the final sentence of the introduction Huygens stated that it would describe the machinery for the ''Medusa'', ''Amelia'' and ''Wassenaar''. Machines that were already under construction.
Huygens would end the report of his first visit to England with the sentence: ''We cannot rival the English in number of ships, but we should at least try to rival them in the capacities (hoedanigheid) of our ships''. In his work The Screw Huygens stated: ''We believe that the best course is to follow other, bigger countries without experimenting to see what's good, but to use their experiments, and so to keep up with these other countries as much as possible.'' On his second trip to England Huygens visited the frigate with auxiliary power ''Imperieuse'', the steam corvette
''Highflyer'' of 250 hp, the screw ship of the line ''Duke of Wellington'', the ''Conflict'' of 8 guns and 400 hp, the transport ''Vulcan'', the ''Tribune'' of 32 guns and 300 hp, the ''Plumper'' etc. etc. He mentioned all these in his book, but he only described the ''Highflyer'' 250 hp and the ''Imperieuse'' of 360 hp. The
''Euryalus'', a sister ship of the ''Imperieuse'' had 400 hp. Therefore there can be little doubt that these two ships: the frigate ''Euryalus'' of 400 hp and the steam corvette ''Highflyer'', can be considered to be the types of the 1855 program, at least with respect to machinery. In 1855 Huygens published: Schroef-stoomschepen as a 4th appendix to Handleiding tot de kennis van het Scheeps-Stoomwerktuig. In Schroefstoomschepen, published in the same year as the Plan 1855, Huygens compared the frigates of the 1855 program to the ''Imperieuse'' and ''Euryalus''. His conclusion was that the Dutch frigates had the same power to displacement ratio, i.e. 1 : 8. (400 hp to 3,200 t displacement), that the English ships had done well in service and had sometimes achieved 9–10 knots. He compared the 250 hp corvettes of the plan 1855 with the light frigate ''Tribune'' of 300 hp. Huygens then declared that from a steam-mechanical point of view the ships of the plan were completely in line with contemporary technical standards.
The resemblance of the ''Evertsen'' to the British ''Imperieuse'' class, e.g.
''Euryalus'', is striking at first sight. ''Evertsen'' length 63.5, beam 15.70, depth 6.80, displacement 3,300t, 400 nominal hp, 1000 ihp. ''Euryalus'' length 65, beam 15.29, depth 5.11, displacement 3,125t, 400 nominal hp 1159 ihp. However equal these ships were in outward appearances, their capabilities differed significantly. Under steam the ''Imperieuse'' class attained almost 10 knots. The ''Evertsen'' ran closer to 8 knots. Considering the difference between the United Kingdom and the Netherlands in naval budget, engineering- and design capabilities this is no surprise.
Armament
The armament of the ''Evertsen'' consisted of 51 guns.
Propulsion
The ''Evertsen'' class had machines of 400 nominal
horsepower
Horsepower (hp) is a unit of measurement of power, or the rate at which work is done, usually in reference to the output of engines or motors. There are many different standards and types of horsepower. Two common definitions used today are the ...
.
Names
The ''Evertsen'' was officially called ''Evertsen'',
but sometimes she was also referred to as ''Admiraal Evertsen''.
Ships in the class
Both ships were built by the Rijkswerf Vlissingen.
References
Note that some online versions of Huygens work are bundled together in single pdf's.
*
*
*
*
*
*
Notes
{{1865-1889DutchShips
Steam frigates of the Royal Netherlands Navy
19th-century naval ships of the Netherlands