Diver's Cutting Tool

Diving equipment is equipment used by underwater divers to make diving activities possible, easier, safer and/or more comfortable. This may be equipment primarily intended for this purpose, or equipment intended for other purposes which is found to be suitable for diving use.

The fundamental item of diving equipment used by divers other than freedivers, is underwater breathing apparatus, such as scuba equipment, and surface-supplied diving equipment, but there are other important items of equipment that make diving safer, more convenient or more efficient. Diving equipment used by recreational scuba divers, also known as scuba gear, is mostly personal equipment carried by the diver, but professional divers, particularly when operating in the surface supplied or saturation mode, use a large amount of support equipment not carried by the diver.

Equipment which is used for underwater work or other activities which is not directly related to the activity of diving, or which has not been designed or modified specifically for underwater use by divers is not considered to be diving equipment.

Classes of underwater breathing apparatus

The diving mode is largely defined by the type of breathing apparatus used.
* Surface supplied diving - mostly used in professional diving. This category includes:
** Surface oriented surface supplied diving (Bounce diving), where the diver starts and finishes the dive at normal atmospheric pressure.
** Saturation diving, where the diver remains under pressure in an underwater habitat or saturation spread between underwater excursions.
** Standard diving dress - mostly used in professional diving. Mainly of historical interest now.
** Airline or Hookah diving.
** "Compressor diving" - a rudimentary form of surface supplied diving used in the Philippines by artisanal fishermen.
** Recreational forms like snuba.
*Scuba diving - The use of self-contained underwater breathing apparatus. This category includes:
** Open-circuit scuba consisting of diving cylinder(s) and diving regulator(s)
** Rebreather diving, closed-circuit or semi-closed-circuit scuba
* Free diving or breathhold diving, where the diver completes the dive on a single breath of air taken at the surface before the dive.
** Snorkel allows breathing at the surface with the face submerged, and is used as an adjunct to free diving and scuba.
* Atmospheric diving suits and other submersibles which isolate the diver from the ambient environment. These are not considered here.
* Liquid breathing systems are still hypothetical and at an early experimental stage. It is hoped that some day practical systems will allow very deep diving. This is not considered here.

File:Working Diver 02.jpg, A US Navy diver at work. The umbilical supplying air from the surface is clearly visible
Image:Standard_diving_dress_1.jpg, Diver in standard diving dress entering the water at Stoney Cove, England
File:Buzo.jpg, Scuba diver with single cylinder and open circuit regulator
Image:Junko-Kitahama Apnea-Monofin cropped.jpg, Free-diver with monofin, ascending
File:Newtsuit atmospheric diving suit.jpg, The Newtsuit is an atmospheric diving suit which has fully articulated rotary joints in the arms and legs.

Personal diving equipment

This is the diving equipment worn by or carried by the diver for personal protection or comfort, or to facilitate the diving aspect of the activity, and may include a selection from:

Underwater breathing apparatus

* Scuba equipment: Primary cylinder(s), carried back-mounted or side mounted and open circuit regulator(s), or rebreather sets. Alternative air source such as bailout bottle or pony bottle, and decompression cylinders and their associated regulators. Secondary demand valve (Octopus).
* Surface supplied equipment: Helmet or full face mask, diver's umbilical, airline, bailout block, bailout cylinder and regulator.

File:Draeger twin 7l cylinders with twin hose regulatorPB068176.jpg, Early twin cylinder set with twin hose regulator
File:Twin 300 bar cylinders with isolating manifold.jpg, Twin scuba cylinders with isolation manifold
File:Charging a spare air cylinder PB048172.jpg, Charging a small bailout cylinder from a larger aluminium scuba cylinder
File:Scuba 01.jpg, Scuba regulator: First stage with primary and secondary demand valves, submersible pressure gauge and low pressure hose for BC inflation.
File:DecompressionPrepEdit.JPG, Technical diver with back mounted open circuit scuba and sling mounted decompression cylinders
File:Diver using Inspiration rebreather at the wreck of the MV Orotava P6308046.JPG, Diving with a closed circuit rebreather
File:IDA-71 with lid of casing opened showing interior P5167777.JPG, Russian made IDA-71 rebreather set
File:2011 06 04 Harburg Taucherhelme DSCI5241.JPG, Heavy standard diving helmet, lightweight demand helmet and band mask
File:US Navy 051026-N-0000X-001 Electronics Technician 1st Class Matthew Ammons, a diver assigned to Mobile Diving and Salvage Unit Two (MDSU-2), is fitted with a Kirby Morgan 37 Dive Helmet.jpg, Diver wearing lightweight demand helmet

Environmental protection

The underwater environment usually requires a diver to wear thermal, sting and abrasion protection.
* In cold water, a diving suit such as a dry suit (at temperatures of 0-10 °C), a wet suit (at temperatures of 21-25 °C), or a Hot water suit (surface supplied diving only) is necessary.
* Boiler suit overalls are often worn over the thermal protection suit by commercial divers as abrasion protection for the more easily damaged and expensive diving suit.
* In very warm water (temperatures of 26-30 °C), many types of tough, long, everyday clothing provide protection, as well as purpose made garments such as dive skins (made of lycra) and shorty wetsuits. In some cases, simple regular swimsuits are also used.
* Diving gloves, including wetsuit gloves and dry gloves, mitts, and three-finger mitts
* Diving hoods
* Diving boots - With dry suits, the boots are usually integrated.
* Safety helmet for scuba diving. (Not part of the breathing apparatus.)
* Diving chain mail may be used as protection against bites by large marine animals
* Diver's cages may be used as protection against large predators
* Atmospheric diving suit provides complete isolation from the environment

File:Fullsuit.jpg, Full wet suit
File:Plongee CombinaisonsEtanchesDansLaGlace-199912.jpg, Dry suits
File:Wetsuit0806.jpg, Short and full length wet suits
File:Diving boots.JPG, Wet suit boots
File:Neoprene diving glovesP7100001.JPG, Neoprene diving gloves
File:Neptunic shark suit 1.jpg, Chain mail shark suit
File:Sharks outside cage.jpg, Shark proof cage
File:Deep Sea Diving Suit.jpg, Atmospheric diving suit

In-water stabilisation and movement

This equipment includes buoyancy control equipment and mobility equipment:
Buoyancy control is achieved by ballasting with diving weights and compensating for buoyancy changes during the dive using a buoyancy compensator:
* Buoyancy compensator, also known as Buoyancy Control Device, BCD or BC - is usually a back mounted or sleeveless jacket style device which includes an inflatable bladder used to adjust the buoyancy of the diver under water, and provide positive buoyancy at the surface. The buoyancy compensator is usually an integral part of the harness system used to secure the scuba set to the diver. The earlier collar style buoyancy compensator is seldom used any more.
* Diving weighting system - to counteract the buoyancy of the diving suit and diver to allow descent. Professional divers may use additional weighting to ensure stability when working on the bottom

Mobility equipment allows the diver to move through the water and maneuver on the spot:
* Diver Propulsion Vehicle - to increase the range of the diver underwater
* Fins for efficient propulsion

File:DiverBC.jpg, Jacket buoyancy compensator
File:DiveXtras Sierra.jpg, Diver propulsion vehicle (scooter)
File:Zavorra.JPG, Weight belt
File:Scubapro bionica flips.jpg, Swim fins

Equipment for dive monitoring and navigation

These are the equipment used for monitoring the course of the dive and following the dive plan when undesirable events are avoided. They include planning and monitoring the dive profile, gas usage and decompression, navigation, and modifying the plan to suit actual circumstances.
* Depth gauge lets the diver monitor depth, particularly maximum depth and, when used with a watch and Decompression tables, also allows the diver to monitor decompression requirements. Some digital depth gauges also indicate ascent rate which is an important factor in avoiding decompression sickness
* Pneumofathometer is the surface supplied diving depth gauge which displays the depth of the diver at the surface control panel. It uses hydrostatic back-pressure on a low flow rate open ended air hose to the diver to indicate depth.
* Diving watch is used with depth gauge for decompression monitoring when using decompression tables. Largely superseded by dive computers, where elapsed time is one of the standard displays, and time of day may also be available.
* Dive timer is an instrument that displays and records depth and elapsed time during the dive. It is usually possible to extract the information after the dive. This function is often available as "Gauge setting" on dive computers.
* Diving compass for underwater navigation. This may be a regular magnetic compass, but is often a selectable function of a dive computer, where a miniature magnetometer is used.
* Submersible pressure gauge, also known as a "contents gauge" is used to monitor the remaining breathing gas supply in scuba cylinders.
* Dive computer helps the diver to avoid decompression sickness by indicating the decompression stops needed for the dive profile. Most dive computers also indicate depth, time and ascent rate. Some also indicate oxygen toxicity exposure and water temperature, and may provide other functions. A display of cylinder pressure is available on air-integrated computers, either via a direct high pressure hose, or remotely via a pressure transducer and through-water transmission.
* Distance line, guide line, or "come-home-line" can be used to guide the diver back to the start point and safety in poor visibility.
** A cave line is a line laid by a diver while penetrating a cave to ensure that the way out is known. Permanent cave lines are marked with line markers at all junctions, indicating the direction along the line toward the nearest exit.

File:A depth gauge and submersible pressure gauge.jpg, A depth gauge and submersible pressure gauge
File:Pressure guage close up.jpg, Submersible pressure gauge
File:Surface supply air panel for 4 divers P3053737.jpg, A surface supply panel for four divers showing four pneumofathometer gauges
File:Suunto D9 Dive Computer.jpg, A watch sized dive computer incorporating an electronic compass and the ability to display cylinder pressure when used with an optional transmitter
File:Dive computer logbook.jpg, Dive computer showing the log of a previous dive
File:UW Navigation tools.jpg, Nav finder and underwater compass - basic underwater navigation tools.
File:Suunto SK-7 diving compass in aftermarket wrist mount P9021026.JPG, Diving compass in aftermarket wrist mount with bungee straps
File:Shearwater Perdix and Ratio iX3M GPS in compass mode P9070460.jpg, Dive computers in compass mode
File:Distance line.JPG, 50 metres of line on a reel
File:Line_Arrow_of_Agnes_Milowka.jpg, alt=Line arrow marker, Line arrow marker
File:Mini SPG Diving.JPG, A miniature submersible pressure gauge (mini SPG) used on pony cylinders

Vision and communication

Underwater vision is significantly affected by several factors. Objects are less visible because of lower levels of natural illumination and are blurred by scattering of light between the object and the viewer, also resulting in lower contrast. These effects vary with wavelength of the light, and color and turbidity of the water. The human eye is unable to focus when in direct contact with water, and an air space must be provided. Voice communication requires special equipment, and much recreational diver communication is visual and based on hand signals.
* Masks allow the diver to see clearly underwater and protect the eyes.
** Full face masks protect the face from dirty or cold water and increases safety by securing the gas supply to the diver's face. If it contains no mouthpiece, the diver can talk, allowing the use of communications equipment.
** Half masks cover only the eyes and nose. The diver breathes from a separate mouthpiece on the regulator or rebreather.
* Diving helmets are often used with surface supplied diving. They provide the same benefits as the full face mask but provide a very secure connection of the gas supply to the diver and additionally protect the head.
* Underwater writing slates and pencils are used to transport pre-dive plans underwater, to record facts whilst underwater and to aid communication with other divers.
* Dive lights, which are usually waterproof and pressure rated torches or flashlights, are essential for safety in low visibility or dark environments such as night diving and wreck and cave penetration. They are useful for communication and signalling both underwater and on the surface at night. Divers need artificial light even in shallow and clear water to reveal the red end of the spectrum of light which is absorbed as it travels through water. Underwater video lights can serve the same purpose.
* Hand-held sonar for a diver can provide a synthetic view using ultrasonic signals emitted and processed by an electronic device and displayed on a screen.
* Ultrasonic signalling devices which attract the buddies attention by vibration have been marketed and may have some limited utility.

Image:Scubamask.jpg, A diving half mask provides clear sight and protection for the eyes.
File:Full face diving mask - ocean reef.JPG, A full face mask covers the eyes, nose and mouth.
File:Dive light on soft Goodman type handle P4177480.JPG, One piece LED dive light with soft Goodman type handle
Image:Diving-torch.jpg, A "canister" style dive light

Safety equipment

* Diver's safety harness, to which a lifeline may be attached, including Bell harness, AR vest, Jump jacket.
* (or tether): A line from the diver to a tender at the surface control point, which may be used for:
** communications, by diving line signals,
** to allow the diver to be found by the stand-by diver following the line,
** to provide a guideline to the surface control point to guide the diver on return,
** to assist the diver to maintain position in a current,
** in an emergency, to recover the diver to the surface, and
** in some cases lift the diver out of the water.
* Shotline: A line connecting a shot weight to a marker buoy, used to mark a dive site and provide a vertical reference for descent and ascent.
* Buddy line: A short line or strap connecting two divers in the water, used to prevent them from being separated in poor visibility and for communication by line signals.
* Jonline: A short line or webbing strap to tether the diver to the shotline in a current.
* Surface marker buoy, which indicates the position of the divers to people at the surface.
* DSMB - (Delayed, or deployable surface marker buoy), or decompression buoy which is inflated at the start of, or during the ascent, to indicate the position of the divers to the surface team, and as a signal that the divers are ascending.
* Cutting tool
** Knife to cut lines, nets or to pry or dig. Not intended for personal protection against underwater predators as it is generally ineffective for this purpose.
** Diver's net or line cutter. This is a small handheld tool carried by scuba divers to extricate themselves if trapped in fishing net or fishing line. It has a small sharp blade such as a replaceable scalpel blade inside the small notch. There is a small hole at the other end for a lanyard to tether the cutter to the diver.
**Trauma shears. Very effective as a line cutter, with low risk of inadvertent injury or damage. Usually carried in a pocket or special purpose sheath.
* Automatic diver recovery devices which inflate the BCD if the diver stops breathing have been marketed. They are not generally used and the risks may outweigh possible benefits.

File:Diver harness with weight pocketsPA268054.jpg, Front view of jacket style diver harness with removable weight pockets
File:Aa scuba netcutter.jpg, scuba diver's net cutter. 7 inches long
File:Blue Reef Dive Knife.JPG, Underwater Kinetics general purpose dive knife
File:Trilobite line cutter with sheath on diving harness P3187295.JPG, Trilobite line cutter with sheath on diving harness
File:Aa trauma shears.jpg, Trauma shears
File:DiverGuard.jpg, DiverGuard automatically inflates the buoyancy compensator if the diver stops breathing.
File:Diving spool with double ender bolt snap P6147909.JPG, Spool with line and double-ender clip
File:Dive reel with DSMB P9245620.JPG, Dive reel with stored DSMB
Image:Avvolgisagola.jpg, A stainless steel line holder with a 20-metre line

Surface detection aids

The purposes of this class of personal equipment are to:
* allow the support boat to monitor and find divers on the surface during or after a dive
* prevent the diver being struck by boat traffic
* mark the diver's position when drift diving or while at the decompression stop
* help rescue services in Lifeboat (rescue), lifeboats and helicopters to locate the diver

Surface detection aids include:
* Surface marker buoy, decompression buoy, delayed SMB, safety sausage or blob
* Red or yellow collapsible flag - high visibility, robust, usually stored bungeed to cylinder
* Whistle - cheap, will only be heard by people far from engine noise
* Dive light, Torch or flashlight - if at sea after nightfall
* Strobe light - needs long-lasting batteries
* High pressure whistle - expensive but effective
* Orange dye marker - increases diver's visibility from search helicopters
* Mirror such as a used compact disc - to reflect sunlight or searchlights
* Red pyrotechnic Flare (pyrotechnic), flares - for helicopters and lifeboats
* ENOS Rescue-System
* Emergency position-indicating rescue beacon (EPIRB)
* Emergency locator beacon - A transmitter carried by the diver that can send a GPS position by VHF radio and/or Automatic identification system (AIS)
* Glow stick - for night diving

Personal tools and accessories

* Camera, strobe (flash), video lights and Underwater photography#Underwater housings, housing - for underwater photography or underwater videography
* Diving reel, spool or line holder to store and transport a distance line or line for a surface marker buoy. A spool is a small flanged cylinder with an axial hole, around which a length of line can be wound, and a line holder is a flat H-shaped piece of rigid sheet material on which a length of Rope#Line, line can be wound, as an alternative to a reel or spool. The line may be used with a surface marker buoy or a delayed surface marker buoy, where negative buoyancy of the spool or line holder will help with unwinding the line underwater.
* Dry box to hold objects the diver needs to keep dry at depth (wallet, cell phone)
* Dry bag to carry items that must stay dry on the boat.
* Dive bag to hold equipment for travel.
* Tool bag to carry tools that may be required for the job. Various types and sizes are available.
* A rescue tether, or rescue rope, is a short lanyard or strap carried by a surface supplied stand-by diver to be used to tether an unresponsive diver to the standby diver during a rescue. It is attached at one end to a D-ring on the stand-by diver's harness, and has a clip at the other end which may be secured to a D-ring on the casualty's harness to allow the rescuer the use of both hands during the return to the bell or surface.

Diving team tools and equipment

* A Jackstay (diving), jackstay is a form of guideline laid between two points to guide the diver during a search or to and from the workplace or to support and guide equipment for transport between two points.
* Lifting bags, an item of diving equipment consisting of a robust and air-tight bag with straps, which is used to lift heavy objects underwater by means of the bag's buoyancy when filled with air.
* A Diving shot, shot line, consisting of a weight, line and buoy, is used to mark the location and identify the ascent and descent point of a dive site, allowing divers to navigate to and from the surface and to do decompression stops at a safe location and to help control rate of ascent and descent.
* Decompression trapeze is used to assist in maintaining correct depth during in-water decompression stops.
* Diving bells and Decompression (diving)#Diving stages and wet bells, diving stages are used to transport divers from the surface to the underwater workplace.
* A Downline (diving), downline is a line from the surface to underwater workplace used to control descent, ascent and the transfer of tools, materials and other equipment between the surface and the workplace. A weighted version suspended from the surface is used to control working depth when blue-water diving, It is similar in function to a jackstay, with an emphasis on the vertical dimension. The terms are largely interchangeable – a downline can be considered a predominantly vertical jackstay.

Surface support equipment connected with diving and underwater work

* Ladder#Variations, Boarding ladders, particularly the ''Christmas tree'' ladder configuration, with a single central rail and cantilevered rungs on both sides, which allows a diver to climb while wearing fins.
* Breathing gas analysis equipment
* Dive boat#Access facilities, Dive platforms (or swim platforms) on boats.
* Diver down flag which is flown to warn others that divers are underwater in the vicinity
* Diver lifts, to conveniently transport a diver from the deck level into the water near the surface and back out in full equipment.
* Diving air compressor to fill diving cylinders with high pressure air or other gasses
* Diving chambers for Decompression (diving)#Surface decompression, surface decompression and treatment of decompression illness
* Diving support vessels
** Dive boat
*** Dive boat#Day boat, Day boats, which may be rigid-hulled inflatable boats
*** Live-aboard dive boat
** Dynamic positioning, Dynamically positioned vessel
* Echo sounding, Echo sounder, side-scan sonar and multi-beam sonar for location, depth measurement, and profiling of dive sites
* GPS receiver - for locating dive sites
* Surface-supplied diving breathing gas supply system, including:
** Surface-supplied diving#Low pressure breathing air compressor, Low pressure breathing air compressors
** Surface-supplied diving#High pressure reserve gas, High pressure gas storage equipment
** Surface-supplied diving#Gas panel, Breathing gas distribution panels
** Surface-supplied diving#Diver's umbilical, Diver's umbilicals
** Surface-supplied diving#Diver communications, Diver voice communications equipment
** Gas reclaim system for deep heliox diving
** Gas blending systems
* Gas blending for scuba diving, Gas blending systems for scuba diving
* Hot water system (diving), Hot water systems for supply of heating water to divers wearing hot water suits
* Diver communications#Light and shape signals, Light and shape signals indicating underwater operations
* Marine VHF radio - for communicating with rescue services and other vessels
* Proton magnetometer - for locating ferrous wrecks
* Saturation systems providing surface support for saturation diving.

File:Air panels and comms box at a surface supplied diver training operation P3118538.jpg, Surface supply air panels. On the left for two divers, on the right for three divers
File:Surface supply diving communications box P3103773.jpg, A hard-wired diver communications unit mounted in a waterproof box for convenience of transport and protection.
File:US Navy 010707-N-3093M-003 Diver Transfer Capsule.jpg, Personnel Transfer Capsule - a dry bell
File:Christmas tree style diver's boarding ladder.png, Christmas tree style diver's boarding ladder

Special equipment for underwater work not carried by the diver

* Remotely operated underwater vehicle - for locating dive sites, observing the environment, conducting visual searches, monitoring divers or performing physical work. Mostly used in professional diving applications.

Maintenance

Life support equipment must be maintained and tested before use to ensure that it remains in serviceable condition and is fit for use at the time. Pre-dive inspection and testing of equipment at some level is standard procedure for all modes and applications of diving. The use of checklists is known to improve reliability of inspection and testing, and may be required by the applicable code of practice or operations manual, or manufacturer's operating instructions. Inadequate pre-dive checks of breathing apparatus can have fatal consequences for some equipment, such as rebreathers, or may require the diving operation to be aborted without achieving its objective.

Maintenance can be categorised as:
*Planned periodical maintenance, such as annual service and inspection of breathing apparatus, pressure equipment, lifting gear and other items according to manufacturers' recommendations or legislation.
*Cleaning and inspection after use, and appropriate storage. A large part of this is washing off salt water to prevent it from drying on the equipment and leaving corrosive brine or abrasive salt deposits, which can cause accelerated deterioration of some materials and jamming of moving parts. The ultraviolet component of sunlight can also damage non-metallic components and equipment, and ozone produced by electrical equipment is known to adversely affect some materials, such as the latex seals on dry suits. Most diving equipment will last better if stored in a cool, dry, well ventilated place out of direct sunlight.

Decontamination and disinfection

Diving equipment may be exposed to contamination in use and when this happens it must be Decontamination, decontaminated This is a particular issue for hazmat diving, but incidental contamination can occur in other environments. Personal diving equipment shared by more than one user requires disinfection before use. Shared use is common for expensive commercial diving equipment, and for rental recreational equipment, and some items such as demand valves, masks, helmets and snorkels which are worn over the face or held in the mouth are possible Vector (epidemiology), vectors for infection by a variety of pathogens. Diving suits are also likely to be contaminated, but less likely to transmit infection directly.

When disinfecting diving equipment it is necessary to consider the effectiveness of the disinfectant on the expected pathogens, and the possible adverse effects on the equipment. Some highly effective methods for disinfection can damage the equipment, or cause accelerated degradation of components due to incompatibility with materials.

Development, manufacture and marketing

History

With the partial exception of breath-hold diving, the development of underwater diving capacity, scope, and popularity, has been closely linked to available technology, and the physiological constraints of the underwater environment which the technology allows divers to partially overcome. The timeline of underwater diving technology is a chronological list of notable events in the history of the development of underwater diving equipment.

Standards

National and international standards have been published for the manufacture and testing of diving equipment.

Underwater breathing apparatus
* Respiratory equipment - Self-contained re-breathing diving apparatus
* Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders
* Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders

Swimfin, Swim fins

* US Military specification. Swim fins, rubber.
* USSR/CIS standard, Ласты резиновые для плавания. Общие технические условия. Swimming rubber flippers. General specifications.
* DIN 7876, DIN 7876:1980 German standard, ''Tauchzubehör. Schwimmflossen. Maße, Anforderungen und Prüfung''. Diving accessories for skin divers. Flippers. Dimensions, requirements and testing.
* BN-82/8444-17.02 Polish Industry standard. ''Gumowy sprzęt pływacki - Płetwy pływackie'' (Rubber swimming equipment - Swimming fins).
* Malaysian standard, Specification for rubber swimming fins.
* Austrian standard, ''Tauch-Zubehör; Schwimmflossen; Abmessungen, sicherheitstechnische Anforderungen, Prüfung, Normkennzeichnung''. Diving accessories; fins; dimensions, safety requirements, testing, marking of conformity.
* Malaysian standard, Specification for rubber swimming fins. First revision.
* European standard, Diving equipment. Diving open heel fins. Requirements and test methods.

Diving mask, Diving masks

* British standard, Specification for snorkels and face masks. Amended 1977.
* USSR/CIS standard, Маски резиновые для плавания под водой. Общие технические условие. Rubber masks for submarine swimming. General specifications.
* German standard, ''Tauch-Zubehör. Tauchbrillen. Sicherheitstechnische Anforderungen und Prüfung''. Diving accessories for skin divers. Diver's masks. Requirements and testing.
* Polish Industry standard, ''Gumowy sprzęt pływacki - Maski pływackie'' (Rubber swimming equipment - Swimming masks).
* American National Standard, Underwater Safety. Recreational Skin and Scuba Diving. Lenses for Masks.
* Austrian standard, ''Tauch-Zubehör; Tauchmasken (Tauchbrillen); Sicherheitstechnische Anforderungen, Prüfung, Normkennzeichnung''. Diving accessories; divers’ masks; safety requirements, testing, marking of conformity.
* Chinese National Standard, 潛水鏡. Diving mask.
* Chinese National Standard, 潛水鏡檢驗法. Method of test for diving mask.
* European standard, Diving equipment. Diving mask. Requirements and test methods.

Snorkel (swimming), Snorkels
* British standard, Specification for snorkels and face masks. Amended 1977.
* German standard, ''Tauch-Zubehör; Schnorchel; Maße, Anforderungen, Prüfung''. Diving accessories for skin divers. Snorkel. Technical requirements of safety, testing.
* Austrian standard, ''Tauch-Zubehör; Schnorchel; Abmessungen, sicherheitstechnische Anforderungen, Prüfung, Normkennzeichnung''. Diving accessories; snorkels; dimensions, safety requirements, testing, marking of conformity.
* German standard, ''Tauch-Zubehör; Schnorchel; Sicherheitstechnische Anforderungen und Prüfung''. Diving accessories for skin divers. Snorkel. Safety requirements and testing.
* European standard, Diving accessories. Snorkels. Safety requirements.
* European standard, Diving equipment. Snorkels. Requirements and test methods.
Buoyancy compensator (diving), Buoyancy compensators
* BN-82/8444-17.05 Polish Industry standard. ''Gumowy sprzęt pływacki - Kamizelki pływackie'' (Rubber swimming equipment - Swim vest).Instytut Przemysłu Gumowego STOMIL (Łódź) (1982) ''BN-82/8444-17.05. Gumowy sprzęt pływacki - Kamizelki pływackie''. Warsaw: Wydawnictwa Normalizacyjne „Alfa”. Document retrieved on 26 November 2020 at bc.pollub.pl
/ref>
* Diving accessories. Buoyancy compensators. Functional and safety requirements, test methods.
* Diving equipment. Buoyancy compensators. Functional and safety requirements, test methods.
Wetsuit, Wetsuits
* 濕式潛水衣. Diving Wet Suit.
* Diving suits. Wet suits. Requirements and test methods. Diving suits. Wet suits. Requirements and test methods.
Dry suit, Dry suits
* Diving suits. Dry suits. Requirements and test methods. Diving suits. Dry suits. Requirements and test methods.
Depth gauge, Depth gauges
* Diving accessories. Depth gauges and combined depth and time measuring devices. Functional and safety requirements, test methods.

References

External links

{{authority control

Diving equipment,