Direct digital control is the automated control of a condition or process by a digital device (computer). Direct digital control takes a centralized network-oriented approach. All instrumentation is gathered by various analog and digital converters which use the network to transport these signals to the central controller. The centralized computer then follows all of its production rules (which may incorporate sense points anywhere in the structure) and causes actions to be sent via the same network to valves, actuators, and other heating, ventilating, and air conditioning components that can be adjusted.

Overview

Central controllers and most terminal unit controllers are programmable, meaning the direct digital control program code may be customized for the intended use. The program features include time schedules, setpoints, controllers, logic, timers, trend logs, and alarms. The unit controllers typically have analog and digital inputs, that allow measurement of the variable (temperature, humidity, or pressure) and

analog Analog or analogue may refer to: Computing and electronics * Analog signal, in which information is encoded in a continuous variable ** Analog device, an apparatus that operates on analog signals *** Analog electronics, circuits which use analog ...

and digital outputs for control of the medium (hot/cold water and/or steam). Digital inputs are typically (dry) contacts from a control device, and analog inputs are typically a voltage or current measurement from a variable (temperature, humidity, velocity, or pressure) sensing device. Digital outputs are typically relay contacts used to start and stop equipment, and analog outputs are typically voltage or current signals to control the movement of the medium (air/water/steam) control devices.

History

An early example of a direct digital control system was completed by the Australian business Midac in 1981-1982 using R-Tec Australian designed hardware. The system installed at the

University of Melbourne The University of Melbourne is a public research university located in Melbourne, Australia. Founded in 1853, it is Australia's second oldest university and the oldest in Victoria. Its main campus is located in Parkville, an inner suburb no ...

used a serial communications network, connecting campus buildings back to a control room "front end" system in the basement of the Old Geology building. Each remote or Satellite Intelligence Unit (SIU) ran 2 Z80 microprocessors whilst the front end ran eleven Z80's in a Parallel Processing configuration with paged common memory. The z80 microprocessors shared the load by passing tasks to each other via the common memory and the communications network. This was possibly the first successful implementation of a distributed processing direct digital control.

Data communication

When direct digital controllers are networked together they can share information through a data bus. The control system may speak 'proprietary' or 'open protocol' language to communicate on the data bus. Examples of open protocol language are Building Automation Control Network (BACnet),

LonWorks LonWorks or Local Operating Network is an open standard (ISO/IEC 14908) for networking platforms specifically created to address the needs of control applications. The platform is built on a protocol created by Echelon Corporation for networking ...

(Echelon), Modbus TCP and KNX.

Integration

When different direct digital control data networks are linked together they can be controlled from a shared platform. This platform can then share information from one language to another. For example, a LON controller could share a temperature value with a BACnet controller. The integration platform can not only make information shareable, but can interact with all the devices. Most of the integration platforms are either a PC or a network appliance. In many cases, the HMI (human machine interface) or SCADA (Supervisory Control And Data Acquisition) are part of it. Integration platform examples, to name only a few, are the Tridium Niagara AX, Trend Controls, TAC Vista, CAN2GO and the Unified Architecture i.e. OPC (Open Connectivity) server technology used when direct connectivity is not possible.

In heating, ventilating, and air conditioning

Direct digital control is often used to control heating, ventilating, and air conditioning devices such as valves via microprocessors using software to perform the control logic. Such systems receive analog and digital inputs from the sensors and devices and, according to the control logic, provide analog or digital outputs. These systems may be mated with a software package that graphically allows operators to monitor, control, alarm and diagnose building equipment remotely.

References

{{Reflist

External links

Role on direct digintal control systems in building commissioning

DDCTalk.com - Information, news, and resources related to direct digital control of buildings
Heating, ventilation, and air conditioning Building engineering