Derek McMinn
   HOME

TheInfoList



OR:

"Professor" Derek McMinn is a British
orthopaedic surgeon Orthopedic surgery or orthopedics ( alternatively spelt orthopaedics), is the branch of surgery concerned with conditions involving the musculoskeletal system. Orthopedic surgeons use both surgical and nonsurgical means to treat musculoskeletal ...
and inventor who practised in Birmingham, United Kingdom at the BMI Edgbaston Hospital. McMinn developed one of the successful modern metal-on-metal
hip resurfacing Hip resurfacing has been developed as a surgical alternative to total hip replacement (THR). The procedure consists of placing a cap (usually made of cobalt-chrome metal), which is hollow and shaped like a mushroom, over the head of the femur whi ...
and the instrumentation and surgical technique to implant it. Hip resurfacing is a bone-conserving, less invasive alternative to
total hip replacement Hip replacement is a surgical procedure in which the hip joint is replaced by a prosthetic implant, that is, a hip prosthesis. Hip replacement surgery can be performed as a total replacement or a hemi (half) replacement. Such joint replacement ...
(THR) for young patients, markedly improves the health-related quality of life measures and currently makes up around a twentieth of all hip
arthroplasty Arthroplasty (literally " e-orming of joint") is an orthopedic surgical procedure where the articular surface of a musculoskeletal joint is replaced, remodeled, or realigned by osteotomy or some other procedure. It is an elective procedure that i ...
(artificial joint) procedures performed in the United Kingdom. McMinn is also the inventor of several other prostheses for the hip and knee. Derek McMinn is the author of ''Modern Hip Resurfacing'' (), published in 2009.


Hip resurfacing


Birmingham Hip Resurfacing

McMinn first began performing hip resurfacing procedures in 1991 using the McMinn Resurfacing, manufactured bu Corin. The rationale behind the procedure was that it would be a bone-conserving alternative to THR for patients with higher activity demands i.e. young patients with severe hip arthritis who are otherwise in good health. This would buy time until they reached an age at which they would be more suitable for a THR. THRs use small diameter metal-on-
polyethylene Polyethylene or polythene (abbreviated PE; IUPAC name polyethene or poly(methylene)) is the most commonly produced plastic. It is a polymer, primarily used for packaging ( plastic bags, plastic films, geomembranes and containers including b ...
bearings which have a high rate of dislocation and revision in this group of patients. Sir John Charnley originally developed the conventional THR in the 1950s, which proved to be one of the most successful operations in the world. In this procedure the 'ball' part of the hip joint (
femoral head The femoral head (femur head or head of the femur) is the highest part of the thigh bone (femur). It is supported by the femoral neck. Structure The head is globular and forms rather more than a hemisphere, is directed upward, medialward, and a l ...
) and a portion of its neck are removed and the 'socket' part ( acetabulum) is grated in preparation. These are replaced with an artificial ball and socket with a long stem in the thigh bone. This and other designs of THRs have since transformed the quality of life of millions of old patients with severe hip arthritis. Because these devices contained
polyethylene Polyethylene or polythene (abbreviated PE; IUPAC name polyethene or poly(methylene)) is the most commonly produced plastic. It is a polymer, primarily used for packaging ( plastic bags, plastic films, geomembranes and containers including b ...
as one of the rubbing surfaces, Charnley was wary of using it in young patients. He warned against the use of a THR in any young patient unless there were other physical restraining factors which would stop the patient from getting back to high activity levels. True to his prediction when these THRs were used in young patients they failed early even in the best centres on the world, including Charnley's own centre at Wrightington Hospital in the UK. The Swedish Hip Register shows that in young patients, 19% of THRs failed 10 years after the operation and 67% had failed by 16 years. Because these patients are young, early failure implies the need for repeated revision operations using progressively more invasive and more complex devices. It was therefore always attractive to surgeons to employ a bone conserving procedure in young patients initially. When they need a revision there is more useful bone preserved to fix the new device to. The Corin technique of resurfacing employs thin (3–4 mm) metal surfaces to line the patients' own hip. In contrast to a THR, the femoral head and neck are retained in this procedure. These large diameter resurfacings match the patient's own anatomy. Because they do not contain polyethylene, these bearings wear at a much lower rate, provided they are manufactured according to specifications, and are implanted well. These allow the patients to return to higher levels of activity after the operation without the fear of early wear. Furthermore, because the devices have the same diameter as the patients' own, they are less prone to dislocation. Over the following years, McMinn further improved the design and operative technique, eventually developing the Birmingham Hip Resurfacing (BHR). The first BHR was implanted in July 1997, in
Birmingham Birmingham ( ) is a City status in the United Kingdom, city and metropolitan borough in the metropolitan county of West Midlands (county), West Midlands in England. It is the second-largest city in the United Kingdom with a population of 1. ...
, England. Over the next few years its success spurred surgeons all over the United Kingdom, Europe, Australia and many parts of Asia to start performing the procedure. On 9 May 2006, the FDA approved the BHR for medical use in the United States. Following thirteen years of usage McMinn reports 96% success with his BHRs in all patients and all diagnoses. These resurfacings are particularly successful in young patients who are the worst group for THRs. His success rate of the BHR in this age group is 98% at 13 years. Several other series and national registers also show similar results of around 95% currently with the BHR. The 2009 Australian National Joint Replacement Registry reported a 95% success rate for the BHR. From 2009 onwards MOM resurfacing came under a cloud, as DePuy marketed the ASR hip resurfacing and persuaded many of their user surgeons to implant it. It had a bearing clearance of 60 microns, in comparison with the BHR's 200+ microns, determined from the Ring explant and other retrievals. With a high early failure rate it was taken off the market within 3 years. More careful surveillance by the UK National Joint Registry indicated that resurfacings in women had a higher failure rate, as any head size of 46mm and less had. In 2004 John O'Hara worked with Finsbury Orthopaedics to develop the ADEPT hip resurfacing. The implant was very similar and was manufactured on the same machines as the BHR has been since 1997. The major developments were in the instrumentation which were so improved that it became much easier to implant the Adept in an optimal position. In the most recent UKNJR data, the failure rate for the Adept is slightly better than ceramic on cross linked polyethylene hip replacements and is half that of the BHR in the range of sizes still made.


Short stem hip replacement


Birmingham Mid Head Resection

In the early 2000s, McMinn found that the results of the BHR are excellent in all types of hip arthritis except one. In a condition called
osteonecrosis Avascular necrosis (AVN), also called osteonecrosis or bone infarction, is death of bone tissue due to interruption of the blood supply. Early on, there may be no symptoms. Gradually joint pain may develop which may limit the ability to move. Co ...
, in which the ball part of the hip joint suffers a loss of blood supply and becomes non-viable, the results of hip resurfacing are not good (less than 90% success 10 years after their operation). Osteonecrosis can occur from a variety of reasons including fracture of the femoral neck, or patients who received high dose steroids due to any medical condition or those suffering from alcohol abuse. In such patients the quality of bone in the femoral head (the ball part of the hip) is compromised and progressively crunches leading to a failure of resurfacing. For such patients with poor quality femoral head bone stock, who are unsuitable for a regular hip resurfacing, McMinn developed a conservative and more versatile metal-on-metal arthroplasty, the Birmingham Mid Head Resection (BMHR) device. The BMHR is demonstrating good medium term results in such high risk patients.


Total knee replacement


Birmingham Knee Replacement

Derek McMinn describes himself as primarily a knee surgeon who digressed into hip surgery for a few years in the past couple of decades. His colleagues acknowledge him as one of the finest knee surgeons in the world. In addition to performing many complex primary and revision knee operations in the past three decades, he also designed and developed a revision total knee replacement (TKR) for extensive bone loss in the mid 1990s. Current evidence shows that although knee replacements survive almost as long as hip replacements, the outcome of available designs of knee replacements are not as good as hip replacements. While only 1–5% of patients with a THR or a hip resurfacing are unhappy with their outcomes in the early years, nearly 20% of patients who undergo a knee replacement are dissatisfied with their outcome. In an attempt to improve the functional outcome following knee replacements McMinn developed a high performance knee which closely mimics the movement, stability and function of the natural knee to a greater extent. The world-class laboratory where the BKR was bench-tested reported that of all the artificial knees tested thus far, the BKR generated the least volume of wear. Early outcomes with the Birmingham Knee Replacement (BKR) are very promising. Of course only time will tell if the long-term satisfaction of patients with BKRs match those with hip resurfacings.


Career

Derek McMinn went to Royal School Dungannon, Northern Ireland where he captained the 1st XV rugby team and represented Ulster Schools XV. He qualified from St Thomas' Hospital Medical school in London in 1977, having captained the 1st XV rugby team and won the Cheselden medal and 1st prize in surgery. He has practised as a Consultant Orthopaedic Surgeon since 1988. McMinn personally trains surgeons from around the world in operative techniques. He is frequently invited to lecture at academic conferences around the world. He was given the honour of delivering the Presidential Guest Lecture at the Hip Society Open Meeting during the 75th Anniversary Meeting of the American Academy of Orthopaedic Surgeons in San Francisco in 2008. McMinn was also invited to deliver the 2008
Sir John Charnley Sir John Charnley, (29 August 1911 – 5 August 1982) was an English orthopaedic surgeon. He pioneered the hip replacement operation, which is now one of the most common operations both in the UK and elsewhere in the world, and created the ...
Lecture at the
British Orthopaedic Association The British Orthopaedic Association is a professional association in Britain for doctors who specialize in orthopaedic surgery. History The British Orthopaedic Association was founded in 1918. One of the founders was Harry Platt, who went on t ...
and the 2008 Sir Robert Jones Lecture at the New York University Hospital for Joint Diseases in New York City, USA. In addition he has delivered guest lectures at conferences in various countries from Japan to Australia to the Asia Pacific Orthopaedic Association, th
European Federation of Orthopaedic Societies
the American Academy, the Argentinian Orthopaedic Association etc. He has addressed the Select Committee of the House of Commons in the United Kingdom apprising the members of parliament and senior civil servants of recent developments and strategies of healthcare as it applies to orthopaedics. McMinn has published extensively on the topic of hip arthritis and several other related orthopaedic topics. Recently he released a book entitled Modern Hip Resurfacing, which covers the development of resurfacing; and describes in detail all the nuances of the operative technique, in addition to being a treatise on the whole subject of resurfacing and its effects. In 2009, in recognition of his contribution to the medical profession, McMinn was awarded the degree of
Doctor of Medicine Doctor of Medicine (abbreviated M.D., from the Latin ''Medicinae Doctor'') is a medical degree, the meaning of which varies between different jurisdictions. In the United States, and some other countries, the M.D. denotes a professional degree. T ...
(MD) Honoris Causa by the
University of Birmingham The University of Birmingham (informally Birmingham University) is a Public university, public research university located in Edgbaston, Birmingham, United Kingdom. It received its royal charter in 1900 as a successor to Queen's College, Birmingha ...
.


References


External links


The McMinn Centre – Birmingham Hip Resurfacing (BHR), Birmingham Mid Head Resection (BMHR) & Birmingham Knee Replacement (BKR)
{{DEFAULTSORT:McMinn, Derek British orthopaedic surgeons English surgeons Living people People from Birmingham, West Midlands Year of birth missing (living people) Medical scandals in the United Kingdom Hospital scandals