Drop And Insert
   HOME

TheInfoList



OR:

In a multichannel
transmission system :''See Transmission (mechanics) for a car's transmission system'' In telecommunications, a transmission system is a system that transmits a signal from one place to another. The signal can be an Signal (electrical engineering), electrical, optical ...
, drop and insert is a process that diverts (''drop'') a portion of the multiplexed aggregate
signal In signal processing, a signal is a function that conveys information about a phenomenon. Any quantity that can vary over space or time can be used as a signal to share messages between observers. The ''IEEE Transactions on Signal Processing'' ...
at an intermediate point, and introduces (''insert'') a different signal for subsequent transmission in the same position. Drop and insert is practiced, for example, in
time-division multiplexing Time-division multiplexing (TDM) is a method of transmitting and receiving independent signals over a common signal path by means of synchronized switches at each end of the transmission line so that each signal appears on the line only a fracti ...
(TDM) when a time slot or
frequency Frequency is the number of occurrences of a repeating event per unit of time. It is also occasionally referred to as ''temporal frequency'' for clarity, and is distinct from ''angular frequency''. Frequency is measured in hertz (Hz) which is eq ...
band Band or BAND may refer to: Places *Bánd, a village in Hungary *Band, Iran, a village in Urmia County, West Azerbaijan Province, Iran *Band, Mureș, a commune in Romania * Band-e Majid Khan, a village in Bukan County, West Azerbaijan Province, I ...
is replaced from another source. The diverted signal may be
demodulate Demodulation is extracting the original information-bearing signal from a carrier wave. A demodulator is an electronic circuit (or computer program in a software-defined radio) that is used to recover the information content from the modulated c ...
d or reinserted into another transmission system in the same or another time slot or frequency band. The time slot or frequency band vacated by the diverted signal need not necessarily be reoccupied by another signal. Likewise, a previously unoccupied time slot or frequency band may be occupied by a signal inserted at the drop-and-insert point. Signals not of interest at the drop-and-insert point are not diverted.


References

Multiplexing {{telecomm-stub