The double-skin façade is a system of building consisting of two skins, or

façade A façade () (also written facade) is generally the front part or exterior of a building. It is a Loanword, loan word from the French language, French (), which means 'frontage' or 'face'. In architecture, the façade of a building is often t ...

s, placed in such a way that air flows in the intermediate cavity. The ventilation of the cavity can be natural, fan supported or mechanical. Apart from the type of the ventilation inside the cavity, the origin and destination of the air can differ depending mostly on climatic conditions, the use, the location, the occupational hours of the building and the HVAC strategy. The glass skins can be single or double glazing units with a distance from 20 cm up to 2 metres. Often, for protection and heat extraction reasons during the cooling period, solar shading devices are placed inside the cavity.

History

The essential concept of the double-skin facade was first explored and tested by the Swiss-French architect

Le Corbusier Charles-Édouard Jeanneret (6 October 188727 August 1965), known as Le Corbusier ( , , ), was a Swiss-French architect, designer, painter, urban planner, writer, and one of the pioneers of what is now regarded as modern architecture. He was ...

in the early 20th century. His idea, which he called ''mur neutralisant'' (neutralizing wall), involved the insertion of heating/cooling pipes between large layers of glass. Such a system was employed in his Villa Schwob (

La Chaux-de-Fonds La Chaux-de-Fonds () is a Swiss city in the canton of Neuchâtel. It is located in the Jura mountains at an altitude of 1000 m, a few kilometers south of the French border. After Geneva, Lausanne and Fribourg, it is the fourth largest city loc ...

, Switzerland, 1916), and proposed for several other projects, including the League of Nations competition (1927), Centrosoyuz building (Moscow, 1928–33), and Cité du Refuge (Paris, 1930). American engineers studying the system in 1930 informed Le Corbusier that it would use much more energy than a conventional air system, but Harvey Bryan later concluded Le Corbusier's idea had merit if it included solar heating. Another early experiment was the 1937 Alfred Loomis house by architect

William Lescaze William Edmond Lescaze, FAIA (March 27, 1896 – February 9, 1969), was a Swiss-born American architect, city planner and industrial designer. He is ranked among the pioneers of modernism in American architecture. Biography William Lescaze w ...

in Tuxedo Park, NY. This house included "an elaborate double envelope" with a 2-foot-deep air space conditioned by a separate system from the house itself. The object was to maintain high humidity levels inside. One of the first modern examples to be constructed was the Occidental Chemical Building (Niagara Falls, New York, 1980) by Cannon Design. This building, essentially a glass cube, included a 4-feet-deep cavity between glass layers to pre-heat air in winter. The recent resurgence of efficient building design has renewed interest in this concept. Since the

USGBC The U.S. Green Building Council (USGBC), co-founded by Mike Italiano, David Gottfried and Rick Fedrizzi in 1993, is a private 501(c)3, membership-based non-profit organization that promotes sustainability in building design, construction, and op ...

rewards points for reduction in energy consumption vs. a base case, this strategy has been used to optimize energy performance of buildings.

Examples

Shapes and reflections, 30 St Mary Axe - geograph

Examples of notable buildings which utilise a double-skin facade are

30 St Mary Axe 30 St Mary Axe (previously known as the Swiss Re Building and informally known as the Gherkin) is a commercial skyscraper in London's primary financial district, the City of London. It was completed in December 2003 and opened in April 2004. W ...

(also known as ''The Gherkin'') and 1 Angel Square. Both of these buildings achieve great environmental credentials for their size, with the benefits of a double skin key to this. The Gherkin features triangular windows on the outer skin which skelter up the skyscraper. These windows open according to weather and building data, allowing more or less air to cross flow through the building for ventilation.

Technical details

The cavity between the two skins may be either naturally or mechanically ventilated. In cool climates the solar gain within the cavity may be circulated to the occupied space to offset heating requirements, while in hot climates the cavity may be vented out of the building to mitigate

solar gain Solar gain (also known as solar heat gain or passive solar gain) is the increase in thermal energy of a space, object or structure as it absorbs incident solar radiation. The amount of solar gain a space experiences is a function of the total in ...

and decrease the cooling load. In each case the assumption is that a higher insulative value may be achieved by using this glazing configuration versus a conventional glazing configuration. Recent studies showed that the energy performance of a building connected to a double-skin facade can be improved both in the cold and the warm season or in cold and warm climates by optimizing the ventilation strategy of the facade.

Criticisms

The advantages of double-skin facades over conventional single skin facades are not clear-cut; similar insulative values may be obtained using conventional high performance, low-e windows. The cavity results in a decrease in usable floor space, and depending on the strategy for ventilating the cavity, it may have problems with condensation, becoming soiled or introducing outside noise. The construction of a second skin may also present a significant increase in materials and design costs. Building energy modelling of double-skin facades is inherently more difficult because of varying

heat transfer Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, ...

properties within the cavity, making the modeling of energy performance and the prediction of savings debatable.

References

External links