A diffused junction transistor is a transistor formed by diffusing
dopant
A dopant, also called a doping agent, is a trace of impurity element that is introduced into a chemical material to alter its original electrical or optical properties. The amount of dopant necessary to cause changes is typically very low. When ...
s into a
semiconductor
A semiconductor is a material which has an electrical resistivity and conductivity, electrical conductivity value falling between that of a electrical conductor, conductor, such as copper, and an insulator (electricity), insulator, such as glas ...
substrate. The diffusion process was developed later than the
alloy junction and
grown junction processes for making bipolar junction transistors (BJTs).
Bell Labs
Nokia Bell Labs, originally named Bell Telephone Laboratories (1925–1984),
then AT&T Bell Laboratories (1984–1996)
and Bell Labs Innovations (1996–2007),
is an American industrial Research and development, research and scientific developm ...
developed the first prototype diffused junction bipolar transistors in 1954.
Diffused-base transistor
The earliest diffused junction transistors were diffused-base transistors. These transistors still had alloy emitters and sometimes alloy collectors like the earlier alloy-junction transistors. Only the base was diffused into the substrate. Sometimes the substrate formed the collector, but in transistors like
Philco
Philco (an acronym for Philadelphia Battery Company) is an American electronics industry, electronics manufacturer headquartered in Philadelphia. Philco was a pioneer in battery, radio, and television production. In 1961, the company was purchased ...
's
micro-alloy diffused transistors the substrate was the bulk of the base.
Double diffusion
At Bell Labs
Calvin Souther Fuller
Calvin Souther Fuller (May 25, 1902 – October 28, 1994) was an American physical chemist at AT&T Bell Laboratories where he worked for 37 years from 1930 to 1967. Fuller was part of a team in basic research that found answers to physical cha ...
produced basic physical understanding of a means of directly forming the emitter, base, and collector by double diffusion. The method was summarized in a history of science at Bell:
:"Fuller had shown that
acceptors of low
atomic weight
Relative atomic mass (symbol: ''A''; sometimes abbreviated RAM or r.a.m.), also known by the deprecated synonym atomic weight, is a dimensionless physical quantity defined as the ratio of the average mass of atoms of a chemical element in a giv ...
diffuse more rapidly than
donor
A donor in general is a person, organization or government which donates something voluntarily. The term is usually used to represent a form of pure altruism, but is sometimes used when the payment for a service is recognized by all parties as rep ...
s, which made possible n–p–n structures by simultaneous diffusion of donors and acceptors of appropriately different surface concentrations. The first n layer (the emitter) was formed because of the greater surface concentration of the donor (for example,
antimony
Antimony is a chemical element with the symbol Sb (from la, stibium) and atomic number 51. A lustrous gray metalloid, it is found in nature mainly as the sulfide mineral stibnite (Sb2S3). Antimony compounds have been known since ancient t ...
). The base formed beyond it because of the more rapid diffusion of the acceptor (for example,
aluminum
Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It ha ...
). The inner (collector) boundary of the base appeared where the diffused aluminum no longer over-compensated the n-type background doping of the original
silicon
Silicon is a chemical element with the symbol Si and atomic number 14. It is a hard, brittle crystalline solid with a blue-grey metallic luster, and is a tetravalent metalloid and semiconductor. It is a member of group 14 in the periodic tab ...
. The base layers of the resulting transistors were 4 μm thick. ... Resulting transistors had a
cut-off frequency
In physics and electrical engineering, a cutoff frequency, corner frequency, or break frequency is a boundary in a system's frequency response at which energy flowing through the system begins to be reduced ( attenuated or reflected) rather than ...
of 120 MHz."
Mesa transistor
Texas Instruments
Texas Instruments Incorporated (TI) is an American technology company headquartered in Dallas, Texas, that designs and manufactures semiconductors and various integrated circuits, which it sells to electronics designers and manufacturers globa ...
made the first grown-junction silicon transistors in 1954.
The diffused silicon mesa transistor was developed at
Bell Labs
Nokia Bell Labs, originally named Bell Telephone Laboratories (1925–1984),
then AT&T Bell Laboratories (1984–1996)
and Bell Labs Innovations (1996–2007),
is an American industrial Research and development, research and scientific developm ...
in 1955 and made commercially available by
Fairchild Semiconductor in 1958.
These transistors were the first to have both diffused bases and diffused emitters. Unfortunately, like all earlier transistors, the edge of the collector–base junction was exposed, making it sensitive to leakage through surface contamination, thus requiring
hermetic seal
A hermetic seal is any type of sealing that makes a given object airtight (preventing the passage of air, oxygen, or other gases). The term originally applied to airtight glass containers, but as technology advanced it applied to a larger categor ...
s or
passivation to prevent degradation of the transistor's characteristics over time.
Planar transistor
![NPN BJT (Planar) Cross-section](https://upload.wikimedia.org/wikipedia/commons/6/6b/NPN_BJT_%28Planar%29_Cross-section.svg)
The planar transistor was developed by Dr.
Jean Hoerni
Jean Amédée Hoerni (September 26, 1924 – January 12, 1997) was a Swiss-American engineer. He was a silicon transistor pioneer, and a member of the " traitorous eight". He developed the planar process, an important technology for reliably fab ...
Fairchild 2N1613
Transistor Museum, Historic Transistor Photo Gallery. at Fairchild Semiconductor in 1959. The planar process used to make these transistors made mass-produced monolithic integrated circuits possible.
Planar transistors have a silica passivation layer to protect the junction edges from contamination, making inexpensive plastic packaging possible without risking degradation of the transistor's characteristics over time.
The first planar transistors had a switching speed much lower than alloy junction transistor
The germanium alloy-junction transistor, or alloy transistor, was an early type of bipolar junction transistor, developed at General Electric and RCA in 1951 as an improvement over the earlier grown-junction transistor.
The usual construction o ...
s of the period, but as they could be mass-produced, and alloy junction transistors could not, they cost much less, and the characteristics of planar transistors improved very rapidly, quickly exceeding those of all earlier transistors and making earlier transistors obsolete.
References
* F.M. Smits editor (1985) ''A History of Engineering and Science in the Bell System'', volume 6: Electronics Technology, pp 43–57, Bell Labs
Nokia Bell Labs, originally named Bell Telephone Laboratories (1925–1984),
then AT&T Bell Laboratories (1984–1996)
and Bell Labs Innovations (1996–2007),
is an American industrial Research and development, research and scientific developm ...
, .
{{Electronic components
Transistor types