Dialkyl Peroxides

In organic chemistry, organic peroxides are organic compounds containing the peroxide functional group (). If the R′ is hydrogen, the compounds are called hydroperoxides, which are discussed in that article. The O−O bond of peroxides easily breaks, producing free radicals of the form (the dot represents an unpaired electron). Thus, organic peroxides are useful as initiators for some types of polymerisation, such as the epoxy resins used in glass-reinforced plastics. MEKP and benzoyl peroxide are commonly used for this purpose. However, the same property also means that organic peroxides can explosively combust. Organic peroxides, like their inorganic counterparts, are often powerful bleaching agents.

Types of organic peroxides

Tert-Butyl hydroperoxide Structural Formula V2.svg, ''tert''-Butyl hydroperoxide, a hydroperoxide (formula: ROOH) that is used to epoxide alkenes.
Dicumyl peroxide.svg, Dicumyl peroxide, a dialkyl peroxide (formula: ROOR) that is used to initiate polymerizations.
Tert-Butylperoxybenzoat Strukturformel.svg, ''tert''-butylperoxybenzoate, a peroxy ester (formula: ) that used as a radical initiator.
Benzoyl-peroxide.svg, dibenzoyl peroxide, a diacyl peroxide (formula: ) is also used as an initiator for polymerizations.
Ethaneperoxoic acid 200.svg, Peroxyacetic acid, a peroxycarboxylic acid (formula: ), is a reagent in organic synthesis.

Organic peroxides are classified (i) by the presence or absence of a hydroxyl (-OH) terminus and (ii) by the presence of alkyl vs acyl substituents. One gap in the classes of organic peroxides is diphenyl peroxide. Quantum chemical calculations predict that it undergoes a nearly barrierless reaction akin to the benzidine rearrangement.

Properties

The O−O bond length in peroxides is about 1.45  Ã…, and the R−O−O angles (R = H, C) are about 110° (water-like). Characteristically, the C−O−O−R (R = H, C) dihedral angles are about 120°. The O−O bond is relatively weak, with a bond dissociation energy of , less than half the strengths of C−C, C−H, and C−O bonds.

Biology

Peroxides play important roles in biology. Many aspects of biodegradation or aging are attributed to the formation and decay of peroxides formed from oxygen in air. Countering these effects is an array of biological and artificial antioxidants.

Hundreds of peroxides and hydroperoxides are known, being derived from fatty acids, steroids, and terpenes. Fatty acids form a number of 1,2-dioxenes. The biosynthesis prostaglandins proceeds via an endoperoxide, a class of bicyclic peroxides.
In fireflies, oxidation of luciferins, which is catalyzed by luciferases, yields a peroxy compound 1,2-dioxetane. The dioxetane is unstable and decays spontaneously to carbon dioxide and excited ketones, which release excess energy by emitting light (bioluminescence).

Industrial uses

In polymer chemistry

Many peroxides are used as a radical initiators, e.g., to enable polymerization of acrylates. Industrial resins based on acrylic and/or methacrylic acid esters are invariably produced by radical polymerization with organic peroxides at elevated temperatures. The polymerization rate is adjusted by suitable choice of temperature and type of peroxide.

Methyl ethyl ketone peroxide, benzoyl peroxide and to a smaller degree acetone peroxide are used as initiators for radical polymerisation of some resins, e.g. polyester and silicone, often encountered when making fiberglass. Pinane hydroperoxide is used in production of styrene-butadiene (synthetic rubber).

Bleaching and disinfecting agents

Benzoyl peroxide and hydrogen peroxide are used as bleaching and "maturing" agents for treating flour to make its grain release gluten more easily; the alternative is letting the flour slowly oxidize by air, which is too slow for the industrialized era. Benzoyl peroxide is an effective topical medication for treating most forms of acne.

Preparation

Dialkyl peroxides, e.g., dicumyl peroxide, are synthesized by addition of hydrogen peroxide to alkenes or by O-alkylation of hydroperoxides.

Diacyl peroxides are typically prepared by treating hydrogen peroxide with acid chlorides or acid anhydrides in the presence of base:
:
:
The reaction competes with hydrolysis of the acylating agent but the hydroperoxide anion is a superior nucleophile relative to hydroxide. Unsymmetrical diacyl peroxides can be produced by treating acyl chlorides with the peroxy acid.

Peresters, an example being ''tert''-Butyl peroxybenzoate, are produced by treating acid anhydrides or acid chlorides with hydroperoxides.

This method can also yield cyclic peroxides. The four-membered dioxetanes can be obtained by 2+2 cycloaddition of oxygen to alkenes.

Reactions

Homolysis

Organic peroxides are widely used to initiate polymerization of olefins, e.g. the formation of polyethylene. A key step is homolysis:
:^.

The tendency to homolyze is also exploited to modify polymers by grafting or visbreaking, or cross-link polymers to create a thermoset. When used for these purposes, the peroxide is highly diluted, so the heat generated by the exothermic decomposition is safely absorbed by the surrounding medium (e.g. polymer compound or emulsion).

Self-oxidation

Especially when in concentrated form, organic peroxides can decompose by self-oxidation, since organic peroxides contain both an oxidizer (the O-O bond) and fuel (C-H and C-C bonds). A "self-accelerating decomposition" occurs when the rate of peroxide decomposition generates heat at a faster rate than it can be dissipated to the environment. Temperature is the main factor in the rate of decomposition. The lowest temperature at which a packaged organic peroxide will undergo a self-accelerating decomposition within a week is defined as the '' self-accelerating decomposition temperature'' (SADT).

Cumene process

Hydroperoxides are intermediates or reagents in major commercial processes. In the cumene process, acetone and phenol are produced by decomposition of cumene hydroperoxide (Me = methyl):
:

Reduction

Organoperoxides can be reduced to alcohols with lithium aluminium hydride, as described in this idealized equation:
:

The phosphite esters and tertiary phosphines also effect reduction:
:

Cleavage to ketones and alcohols in the base catalyzed Kornblum–DeLaMare rearrangement

Some peroxides are drugs, whose action is based on the formation of radicals at desired locations in the organism. For example, artemisinin and its derivatives, such as artesunate, possess the most rapid action of all current drugs against falciparum malaria. Artesunate is also efficient in reducing egg production in '' Schistosoma haematobium'' infection.

Analysis of peroxides

Several analytical methods are used for qualitative and quantitative determination of peroxides. A simple qualitative detection of peroxides is carried out with the iodine-starch reaction. Here peroxides, hydroperoxides or peracids oxidize the added potassium iodide into iodine, which reacts with starch producing a deep-blue color. Commercial paper indicators using this reaction are available. This method is also suitable for quantitative evaluation, but it can not distinguish between different types of peroxide compounds. Discoloration of various indigo dyes in presence of peroxides is used instead for this purpose. For example, the loss of blue color in leuco-methylene blue is selective for hydrogen peroxide.

Quantitative analysis of hydroperoxides can be performed using potentiometric titration with lithium aluminium hydride. Another way to evaluate the content of peracids and peroxides is the volumetric titration with alkoxides such as sodium ethoxide.

Active oxygen in peroxides

Each peroxy group is considered to contain one active oxygen atom. The concept of active oxygen content is useful for comparing the relative concentration of peroxy groups in formulations, which is related to the energy content. In general, energy content increases with active oxygen content, and thus the higher the molecular weight of the organic groups, the lower the energy content and, usually, the lower the hazard.

The term active oxygen is used to specify the amount of peroxide present in any organic peroxide formulation. One of the oxygen atoms in each peroxide group is considered "active". The theoretical amount of active oxygen can be described by the following equation:

: A mathrm\text (%) = 16\frac \times 100,

where is the number of peroxide groups in the molecule, and is the molecular mass of the pure peroxide.

Organic peroxides are often sold as formulations that include one or more phlegmatizing agents. That is, for safety sake or performance benefits the properties of an organic peroxide formulation are commonly modified by the use of additives to phlegmatize (desensitize), stabilize, or otherwise enhance the organic peroxide for commercial use. Commercial formulations occasionally consist of mixtures of organic peroxides, which may or may not be phlegmatized.

Safety

Peroxides are also strong oxidizers and easily react with skin, cotton and wood pulp. For safety reasons, peroxidic compounds are stored in a cool, opaque container, as heating and illumination accelerate their chemical reactions. Small amounts of peroxides, which emerge from storage or reaction vessels are neutralized using reducing agents such as iron(II) sulfate. Safety measures in industrial plants producing large amounts of peroxides include the following:

1) The equipment is located within reinforced concrete structures with foil windows, which would relieve pressure and not shatter in case of explosion.

2) The products are bottled in small containers and are moved to a cold place promptly after the synthesis.

3) The containers are made of non-reactive materials such as stainless steel, some aluminium alloys or dark glass.Ozonelab Peroxide compatibility
/ref>

For safe handling of concentrated organic peroxides, an important parameter is temperature of the sample, which should be maintained below the self accelerating decomposition temperature of the compound.

The shipping of organic peroxides is restricted. The US Department of Transportation lists organic peroxide shipping restrictions and forbidden materials in 49 CFR 172.101 Hazardous Materials Table based on the concentration and physical state of the material:

See also

* Alkenyl peroxides
* Peroxyacyl nitrates
* Ozonide

External links

Organic Peroxide Producers Safety Division


*



European Organic Peroxide Safety Group

References

{{Functional group

Organic compounds
Food additives
Functional groups