Days Of '49
   HOME

TheInfoList



OR:

A day is the time period of a full
rotation of the Earth Earth's rotation or Earth's spin is the rotation of planet Earth around its own axis, as well as changes in the orientation of the rotation axis in space. Earth rotates eastward, in prograde motion. As viewed from the northern polar star Po ...
with respect to the Sun. On average, this is 24
hour An hour (symbol: h; also abbreviated hr) is a unit of time conventionally reckoned as of a day and scientifically reckoned between 3,599 and 3,601 seconds, depending on the speed of Earth's rotation. There are 60 minutes in an hour, and 24 ho ...
s, 1440
minute The minute is a unit of time usually equal to (the first sexagesimal fraction) of an hour, or 60 seconds. In the UTC time standard, a minute on rare occasions has 61 seconds, a consequence of leap seconds (there is a provision to insert a nega ...
s, or 86,400
second The second (symbol: s) is the unit of time in the International System of Units (SI), historically defined as of a day – this factor derived from the division of the day first into 24 hours, then to 60 minutes and finally to 60 seconds ...
s. In everyday life, the word "day" often refers to a solar day, which is the length between two solar noons or times the Sun reaches the highest point. The word "day" may also refer to ''
daytime Daytime as observed on Earth is the period of the day during which a given location experiences natural illumination from direct sunlight. Daytime occurs when the Sun appears above the local horizon, that is, anywhere on the globe's hemis ...
'', a time period when the location receives direct and indirect sunlight. On Earth, as a location passes through its day, it experiences morning, noon, afternoon, evening, and night. The effect of a day is vital to many life processes, which is called the
circadian rhythm A circadian rhythm (), or circadian cycle, is a natural, internal process that regulates the sleep–wake cycle and repeats roughly every 24 hours. It can refer to any process that originates within an organism (i.e., Endogeny (biology), endogeno ...
. A collection of sequential days is organized into
calendar A calendar is a system of organizing days. This is done by giving names to periods of time, typically days, weeks, months and years. A date is the designation of a single and specific day within such a system. A calendar is also a physi ...
s as dates, almost always into weeks, months and years. Most calendars' arrangement of dates use either or both the Sun with its
four seasons The Four Seasons, originally referring to the traditional seasons of spring, summer, autumn and winter (typical of a temperate climate), may refer to: Music * ''The Four Seasons'' (Vivaldi), a 1725 set of four violin concertos by Antonio Viv ...
(
solar calendar A solar calendar is a calendar whose dates indicate the season or almost equivalently the apparent position of the Sun relative to the stars. The Gregorian calendar, widely accepted as a standard in the world, is an example of a solar calendar. T ...
) or the Moon's phasing ( lunar calendar). The start of a day is commonly accepted as roughly the time of the middle of the night or
midnight Midnight is the transition time from one day to the next – the moment when the date changes, on the local official clock time for any particular jurisdiction. By clock time, midnight is the opposite of noon, differing from it by 12 hours. ...
, written as 00:00 or 12:00 am in 24- or
12-hour clock The 12-hour clock is a time convention in which the 24 hours of the day are divided into two periods: a.m. (from Latin , translating to "before midday") and p.m. (from Latin , translating to "after midday"). For different opinions on represent ...
s, respectively. Because the time of midnight varies between locations, time zones are set up to facilitate the use of a uniform
standard time Standard time is the synchronisation of clocks within a geographical region to a single time standard, rather than a local mean time standard. Generally, standard time agrees with the local mean time at some meridian that passes through the r ...
. Midnight is not the only convention used to determine the start of a new day. Other defining moments have been used throughout history, and some are used even today, such as with the Jewish religious calendar, which counts days from sunset to sunset, so the Jewish Sabbath begins at sundown on Friday. Astronomers also have a convention where their day begins at high noon. This way, all of their observations throughout a single night are recorded as happening on the same day. This method removes ambiguity of a particular observation happening on a calendar day, eliminating the need to further determine which night it happened on. Because when using midnight as the start of day, each calendar day is associated with two separate night periods. In specific applications, the definition of a day is slightly modified, such as in the ISQ day (exactly 86,400
second The second (symbol: s) is the unit of time in the International System of Units (SI), historically defined as of a day – this factor derived from the division of the day first into 24 hours, then to 60 minutes and finally to 60 seconds ...
s) used for
computer A computer is a machine that can be programmed to Execution (computing), carry out sequences of arithmetic or logical operations (computation) automatically. Modern digital electronic computers can perform generic sets of operations known as C ...
s and standards keeping,
local mean time Local mean time (LMT) is a form of solar time that corrects the variations of Solar time#Apparent solar time, local apparent time, forming a uniform time scale at a specific longitude. This measurement of time was used for everyday use during the ...
accounting of the Earth's natural fluctuation of a solar day, and stellar day and sidereal day (using the
celestial sphere In astronomy and navigation, the celestial sphere is an abstract sphere that has an arbitrarily large radius and is concentric to Earth. All objects in the sky can be conceived as being projected upon the inner surface of the celestial sphere, ...
) used for astronomy. In most countries outside of the tropics, daylight saving time is practiced, and each year there will be one 23-hour civil day and one 25-hour civil day. Due to slight variations in the rotation of the Earth, there are rare times when a leap second will get inserted at the end of a UTC day, and so while almost all days have a duration of 86,400 seconds, there are these exceptional cases of a day with 86,401 seconds (in the half-century spanning 1972 through 2022, there have been a total of 27 leap seconds that have been inserted, so roughly once every other year).


Etymology

The term comes from the
Old English Old English (, ), or Anglo-Saxon, is the earliest recorded form of the English language, spoken in England and southern and eastern Scotland in the early Middle Ages. It was brought to Great Britain by Anglo-Saxon settlement of Britain, Anglo ...
term ''dæġ'' (), with its cognates such as ''dagur'' in Icelandic, ''Tag'' in German, and ''dag'' in Norwegian, Danish,
Swedish Swedish or ' may refer to: Anything from or related to Sweden, a country in Northern Europe. Or, specifically: * Swedish language, a North Germanic language spoken primarily in Sweden and Finland ** Swedish alphabet, the official alphabet used by ...
and Dutch – all stemming from a Proto-Germanic root ''*dagaz''.Mallory, James P.; Adams, Douglas Q. (2006). ''The Oxford Introduction to Proto-Indo-European and the Proto-Indo-European World''. Oxford, UK: Oxford University Press. p. 124. . , ''day'' is the 205th most common word in US English, and the 210th most common in UK English.


Definitions


Apparent and mean solar day

Several definitions of this universal human concept are used according to context, need and convenience. Besides the day of 24 hours (86,400 seconds), the word ''day'' is used for several different spans of time based on the rotation of the Earth around its axis. An important one is the ''solar day'', defined as the time it takes for the Sun to return to its culmination point (its highest point in the sky). Because celestial orbits are not perfectly circular, and thus objects travel at different speeds at various positions in their orbit, a solar day is not the same length of time throughout the orbital year. Because the Earth moves along an
eccentric orbit In astrodynamics, the orbital eccentricity of an astronomical object is a dimensionless parameter that determines the amount by which its orbit around another body deviates from a perfect circle. A value of 0 is a circular orbit, values be ...
around the Sun while the Earth spins on an inclined axis, this period can be up to 7.9 seconds more than (or less than) 24 hours. In recent decades, the average length of a solar day on Earth has been about 86,400.002 seconds (24.000 000 6 hours) and there are currently about 365.2421875 solar days in one mean tropical year. Ancient custom has a new day start at either the rising or setting of the Sun on the local horizon (Italian reckoning, for example, being 24 hours from sunset, oldstyle). The exact moment of, and the interval between, two sunrises or sunsets depends on the geographical position ( longitude and latitude, as well as altitude), and the time of year (as indicated by ancient hemispherical
sundial A sundial is a horological device that tells the time of day (referred to as civil time in modern usage) when direct sunlight shines by the apparent position of the Sun in the sky. In the narrowest sense of the word, it consists of a flat ...
s). A more constant day can be defined by the Sun passing through the local
meridian Meridian or a meridian line (from Latin ''meridies'' via Old French ''meridiane'', meaning “midday”) may refer to Science * Meridian (astronomy), imaginary circle in a plane perpendicular to the planes of the celestial equator and horizon * ...
, which happens at local noon (upper
culmination In observational astronomy, culmination is the passage of a celestial object (such as the Sun, the Moon, a planet, a star, constellation or a deep-sky object) across the observer's local meridian. These events were also known as meridian transits ...
) or
midnight Midnight is the transition time from one day to the next – the moment when the date changes, on the local official clock time for any particular jurisdiction. By clock time, midnight is the opposite of noon, differing from it by 12 hours. ...
(lower culmination). The exact moment is dependent on the geographical longitude, and to a lesser extent on the time of the year. The length of such a day is nearly constant (24 hours ± 30 seconds). This is the time as indicated by modern sundials. A further improvement defines a fictitious mean Sun that moves with constant speed along the celestial equator; the speed is the same as the average speed of the real Sun, but this removes the variation over a year as the Earth moves along its orbit around the Sun (due to both its velocity and its axial tilt). In terms of Earth's rotation, the average day length is about 360.9856°. A day lasts for more than 360° of rotation because of the Earth's revolution around the Sun. With a full year being slightly more than 360 days, the Earth's daily orbit around the Sun is slightly less than 1°, so the day is slightly less than 361° of rotation. Elsewhere in the Solar System or other parts of the universe, a day is a full rotation of other large
astronomical object An astronomical object, celestial object, stellar object or heavenly body is a naturally occurring physical entity, association, or structure that exists in the observable universe. In astronomy, the terms ''object'' and ''body'' are often us ...
s with respect to its star.


Civil day

For civil purposes, a common clock time is typically defined for an entire region based on the local mean solar time at a central meridian. Such ''time zones'' began to be adopted about the middle of the 19th century when railroads with regularly occurring schedules came into use, with most major countries having adopted them by 1929. As of 2015, throughout the world, 40 such zones are now in use: the central zone, from which all others are defined as offsets, is known as UTC±00, which uses Coordinated Universal Time (UTC). The most common convention starts the civil day at
midnight Midnight is the transition time from one day to the next – the moment when the date changes, on the local official clock time for any particular jurisdiction. By clock time, midnight is the opposite of noon, differing from it by 12 hours. ...
: this is near the time of the lower culmination of the Sun on the central meridian of the time zone. Such a day may be referred to as a calendar day. A day is commonly divided into 24 hours of 60 minutes, with each minute composed of 60 seconds.


Sidereal day

A sidereal day or stellar day is the span of time it takes for the Earth to make one entire
rotation Rotation, or spin, is the circular movement of an object around a '' central axis''. A two-dimensional rotating object has only one possible central axis and can rotate in either a clockwise or counterclockwise direction. A three-dimensional ...
with respect to the celestial background or a distant star (assumed to be fixed). Measuring a day as such is used in astronomy. A sidereal day is about 4 minutes less than a solar day of 24 hours (23 hours 56 minutes and 4.09 seconds), or 0.99726968 of a solar day of 24 hours. There are about 366.2422 stellar days in one mean tropical year (one stellar day more than the number of solar days). Besides a stellar day on Earth, other bodies in the Solar System have day times, the durations of these being:


In the International System of Units

In the
International System of Units The International System of Units, known by the international abbreviation SI in all languages and sometimes pleonastically as the SI system, is the modern form of the metric system and the world's most widely used system of measurement. E ...
(SI), a day not an official unit, but is accepted for use with SI. A day, with symbol d, is defined using SI units as 86,400 seconds; the second is the base unit of time in
SI units The International System of Units, known by the international abbreviation SI in all languages and sometimes Pleonasm#Acronyms and initialisms, pleonastically as the SI system, is the modern form of the metric system and the world's most wid ...
. In 1967–68, during the 13th CGPM (Resolution 1), the International Bureau of Weights and Measures (BIPM) redefined a second as "... the duration of 9,192,631,770 periods of the
radiation In physics, radiation is the emission or transmission of energy in the form of waves or particles through space or through a material medium. This includes: * ''electromagnetic radiation'', such as radio waves, microwaves, infrared, visi ...
corresponding to the transition between two
hyperfine In atomic physics, hyperfine structure is defined by small shifts in otherwise degenerate energy levels and the resulting splittings in those energy levels of atoms, molecules, and ions, due to electromagnetic multipole interaction between the ...
levels Level or levels may refer to: Engineering *Level (instrument), a device used to measure true horizontal or relative heights *Spirit level, an instrument designed to indicate whether a surface is horizontal or vertical *Canal pound or level *Regr ...
of the
ground state The ground state of a quantum-mechanical system is its stationary state of lowest energy; the energy of the ground state is known as the zero-point energy of the system. An excited state is any state with energy greater than the ground state. ...
of the
caesium Caesium (IUPAC spelling) (or cesium in American English) is a chemical element with the symbol Cs and atomic number 55. It is a soft, silvery-golden alkali metal with a melting point of , which makes it one of only five elemental metals that a ...
133 atom." This makes the SI-based day last exactly 794,243,384,928,000 of those periods.


In decimal and metric time

Various
decimal The decimal numeral system (also called the base-ten positional numeral system and denary or decanary) is the standard system for denoting integer and non-integer numbers. It is the extension to non-integer numbers of the Hindu–Arabic numeral ...
or metric time proposals have been made, but do not redefine the day, and use the day or sidereal day as a base unit. Metric time uses metric prefixes to keep time. It uses the day as the base unit, and smaller units being fractions of a day: a metric hour (''deci'') is of a day; a metric minute (''milli'') is of a day; etc. Similarly, in decimal time, the length of a day is static to normal time. A day is also split into 10 hours, and 10 days comprise a ''décade –'' the equivalent to a week. 3 ''décades'' make a month. Various decimal time proposals which do not redefine the day: Henri de Sarrauton's proposal kept days, and subdivided hours into 100 minutes; in Mendizábal y Tamborel's proposal, the sidereal day was the basic unit, with subdivisions made upon it; and Rey-Pailhade's proposal divided the day 100 ''cés.''


Other definitions

The word refers to various similarly defined ideas, such as: ; Full day * 24
hour An hour (symbol: h; also abbreviated hr) is a unit of time conventionally reckoned as of a day and scientifically reckoned between 3,599 and 3,601 seconds, depending on the speed of Earth's rotation. There are 60 minutes in an hour, and 24 ho ...
s (exactly) (a nychthemeron) * A day counting approximation, for example "See you in three days." or "the following day" * The full day covering both the dark and light periods, beginning from the start of the dark period or from a point near the middle of the dark period * A full dark and light period, sometimes called a '' nychthemeron'' in English, from the Greek for '' night-day''; or more colloquially the term . In other languages, is also often used. Other languages also have a separate word for a full day. * Part of a date: the day of the year (''doy'') in ordinal dates, day of the month (''dom'') in
calendar date A calendar date is a reference to a particular day represented within a calendar system. The calendar date allows the specific day to be identified. The number of days between two dates may be calculated. For example, "25 " is ten days after " ...
s or day of the week (''dow'') in week dates. * Time regularly spend at paid work on a single work day, cf. man-day and workweek. ; Daytime * The period of light when the Sun is above the local
horizon The horizon is the apparent line that separates the surface of a celestial body from its sky when viewed from the perspective of an observer on or near the surface of the relevant body. This line divides all viewing directions based on whether i ...
(that is, the time period from sunrise to
sunset Sunset, also known as sundown, is the daily disappearance of the Sun below the horizon due to Earth's rotation. As viewed from everywhere on Earth (except the North and South poles), the equinox Sun sets due west at the moment of both the spring ...
) * The time period from 06:00–18:00 (6:00 am – 6:00 pm) or 21:00 (9:00 pm) or another fixed clock period overlapping or offset from other time periods such as " morning", " evening", or " night". * The time period from first-light " dawn" to last-light " dusk". ;Other * A specific period of the day, which may vary by context, such as "the school day" or "the work day".


Variations in length

Mainly due to tidal deceleration – the Moon's gravitational pull slowing down the
Earth's rotation Earth's rotation or Earth's spin is the rotation of planet Earth around its own Rotation around a fixed axis, axis, as well as changes in the orientation (geometry), orientation of the rotation axis in space. Earth rotates eastward, in retrograd ...
– the Earth's rotational period is slowing. Because of the way the second is defined, the mean length of a solar day is now about 86,400.002 seconds, and is increasing by about 2
millisecond A millisecond (from '' milli-'' and second; symbol: ms) is a unit of time in the International System of Units (SI) equal to one thousandth (0.001 or 10−3 or 1/1000) of a second and to 1000 microseconds. A unit of 10 milliseconds may be called ...
s per century. Since the rotation rate of the Earth is slowing, the length of a second fell out of sync with a second derived from the rotational period of the earth. This arose the need for leap seconds, which insert extra seconds into Coordinated Universal Time (UTC). Although typically 86,400 seconds in duration, a civil day can be either 86,401 or 86,399 SI seconds long on such a day. Other than the two-millisecond variation from tidal deceleration, other factors minutely affect the day's length, which creates irregularity in the placement of leap seconds. Leap seconds are announced in advance by the International Earth Rotation and Reference Systems Service (IERS), which measures the Earth's rotation and determines whether a leap second is necessary.


Geological day lengths

Discovered by paleontologist John W. Wells, the day lengths of geological periods have been estimated by measuring sedimentation rings in coral fossils, due to some biological systems being affected by the tide. The length of a day at the Earth's formation is estimated at 6 hours. Arbab I. Arbab plotted day lengths over time and found a curved line. Arbab attributed this to the change of water volume present affecting Earth's rotation.


Boundaries

For most diurnal animals, the day naturally begins at dawn and ends at sunset. Humans, with their cultural norms and scientific knowledge, have employed several different conceptions of the day's boundaries. In the Hebrew Bible,
Genesis Genesis may refer to: Bible * Book of Genesis, the first book of the biblical scriptures of both Judaism and Christianity, describing the creation of the Earth and of mankind * Genesis creation narrative, the first several chapters of the Book o ...
1:5 defines a day in terms of "evening" and "morning" before recounting the creation of a sun to illuminate it: "And God called the light Day, and the darkness he called Night. And the evening and the morning were the first day." Common convention among the ancient Romans, ancient Chinese and in modern times is for the civil day to begin at midnight, i.e. 00:00, and to last a full 24 hours until 24:00 (i.e. 00:00 of the next day). In ancient Egypt the day was reckoned from sunrise to sunrise. The Jewish day begins at either sunset or nightfall (when three second- magnitude stars appear). Medieval Europe also followed this tradition, known as Florentine reckoning: in this system, a reference like "two hours into the day" meant ''two hours after sunset'' and thus times during the evening need to be shifted back one calendar day in modern reckoning. Days such as
Christmas Eve Christmas Eve is the evening or entire day before Christmas Day, the festival commemorating the birth of Jesus. Christmas Day is observed around the world, and Christmas Eve is widely observed as a full or partial holiday in anticipation ...
,
Halloween Halloween or Hallowe'en (less commonly known as Allhalloween, All Hallows' Eve, or All Saints' Eve) is a celebration observed in many countries on 31 October, the eve of the Western Christian feast of All Saints' Day. It begins the observanc ...
, and the Eve of Saint Agnes are remnants of the older pattern when
holidays A holiday is a day set aside by Norm (social), custom or by law on which normal activities, especially business or work including school, are suspended or reduced. Generally, holidays are intended to allow individuals to celebrate or commemorate ...
began during the prior evening. Prior to 1926, Turkey had two time systems: Turkish (counting the hours from sunset) and French (counting the hours from midnight).


Parts

Humans have divided the day in rough periods, which can have cultural implications, and other effects on humans' biological processes. The parts of the day do not have set times; they can vary by lifestyle or hours of daylight in a given place.


Daytime

A day, in the sense of
daytime Daytime as observed on Earth is the period of the day during which a given location experiences natural illumination from direct sunlight. Daytime occurs when the Sun appears above the local horizon, that is, anywhere on the globe's hemis ...
that is distinguished from night time, is commonly defined as the period during which
sunlight Sunlight is a portion of the electromagnetic radiation given off by the Sun, in particular infrared, visible, and ultraviolet light. On Earth, sunlight is scattered and filtered through Earth's atmosphere, and is obvious as daylight when t ...
directly reaches the ground, assuming that there are no local obstacles. The length of daytime averages slightly more than half of the 24-hour day. Two effects make daytime on average longer than nights. The Sun is not a point, but has an apparent size of about 32 minutes of arc. Additionally, the
atmosphere An atmosphere () is a layer of gas or layers of gases that envelop a planet, and is held in place by the gravity of the planetary body. A planet retains an atmosphere when the gravity is great and the temperature of the atmosphere is low. A s ...
refracts sunlight in such a way that some of it reaches the ground even when the Sun is below the horizon by about 34 minutes of arc. So the first light reaches the ground when the centre of the Sun is still below the horizon by about 50 minutes of arc. Thus, daytime is on average around 7 minutes longer than 12 hours. Daytime is further distinguished into morning, afternoon, and evening. Morning occurs between sunrise and noon. Afternoon occurs between noon and
sunset Sunset, also known as sundown, is the daily disappearance of the Sun below the horizon due to Earth's rotation. As viewed from everywhere on Earth (except the North and South poles), the equinox Sun sets due west at the moment of both the spring ...
. This period of time sees human's highest body temperature, an increase of traffic collisions, and a decrease of
productivity Productivity is the efficiency of production of goods or services expressed by some measure. Measurements of productivity are often expressed as a ratio of an aggregate output to a single input or an aggregate input used in a production proces ...
. Evening occurs between the end of afternoon and before sleep.


Twilight

Twilight is the period before
sunset Sunset, also known as sundown, is the daily disappearance of the Sun below the horizon due to Earth's rotation. As viewed from everywhere on Earth (except the North and South poles), the equinox Sun sets due west at the moment of both the spring ...
and after sunrise in which there is natural light but no direct sunlight. Twilight can be subdivided into dawn or dusk, or into civil twilight, nautical twilight, and
astronomical twilight Twilight is light produced by sunlight scattering in the upper atmosphere, when the Sun is below the horizon, which illuminates the lower atmosphere and the Earth's surface. The word twilight can also refer to the periods of time when this ill ...
. Civil twilight begins when the sun is 6 degrees below the horizon; nautical begins at 12 degrees, and astronomical begins at 18 degrees.


Night

Night is the period in which the sky is dark, or the period between dusk and dawn where no light is visible. Due to the darkness of night, it affects the
circadian rhythm A circadian rhythm (), or circadian cycle, is a natural, internal process that regulates the sleep–wake cycle and repeats roughly every 24 hours. It can refer to any process that originates within an organism (i.e., Endogeny (biology), endogeno ...
; artificial light during night can disrupt circadian rhythms and sleep.


See also

* Determination of the day of the week *
Holiday A holiday is a day set aside by custom or by law on which normal activities, especially business or work including school, are suspended or reduced. Generally, holidays are intended to allow individuals to celebrate or commemorate an event or tra ...
* ISO 8601 * Season, for a discussion of daylight and darkness at various latitudes * Synodic day * World Meteorological day


References


External links

* * * {{Authority control Orders of magnitude (time) Units of time