DBAG Class 484

Deutsche Bahn Classes 483 and 484 are related fleets of electric multiple unit (EMU) trains ordered by German railway operator Deutsche Bahn for use on the Berlin S-Bahn system. They are designed and manufactured by a consortium of Stadler Rail and Siemens Mobility. The first units entered public service on 1 January 2021.

Technical details

The full fleet will comprise 21 two-car units of Class 483, referred to as "quarter trains", and 85 four-car units of Class 484, referred to as "half trains". Each unit has a full driver's cab at each end. Units of both classes can work in multiple with each-other, allowing services to be run with trains of two, four, six, or eight cars in total as required.

Stadler, the consortium leader, is responsible for the mechanical and structural aspects of the production process, as part of which the units' aluminium bodyshells are fabricated in Szolnok, Hungary, before being transported by road to the Stadler Pankow works in Berlin for final assembly. Siemens provide the bogies and the electrical subsystems, including the power supply gear, the traction and braking systems, the train control systems, and the passenger information equipment. A significant part of the Siemens contribution is based on the company's work delivering the Oslo Metro MX3000 fleet between 2005 and 2012; the bogies are derived from the lightweight and low-height SF 1000 model used on vehicles for both Oslo and Nuremburg, and the weather-proofingincluding the hermetic sealing of much of the power electronics equipmentis especially configured to guard against ice and snow ingress.

The units' traction systems are designed to a high level of redundancy. Each vehicle in each unit is equipped with its own independent traction converter supplying the traction motors that are fitted to three out of the vehicle's four axles. This improves reliability, as on-board drive failures affect only individual vehicles while the rest of the train continues to function. Similarly, although each pair of vehicles shares a single auxiliary-supply converter, each converter has two independent sets of components, so that a failure of one set causes the loss of only half the supply rather than the whole.

In a departure from previous S-Bahn Berlin practice, the vehicles of each unit are identified by letters rather than by individual numbers; thus the vehicles of unit 483 001 are identified as 483 001 A and 483 001 B, and so on. Vehicles of Class 484 units are identified by letters A to D in the same manner.

The new units incorporate a number of new features designed to improve accessibility and comfort. Notably, they are the first trains on the Berlin S-Bahn to have air-conditioning fitted in the passenger saloons; due to height limitations imposed by the network's structure gauge, part of the system is installed under the vehicle floors.

Wheelchair spaces are provided adjacent to each driver's cab, with folding ramps available at the relevant doors. The exterior faces of all passenger doors have been painted black, to better contrast with the ochre-and-red coloured bodysides, and LED strips that illuminate green when the doors are open and red when they're closing are fitted at each door and vestibule. Audible indicators that sound when the doors are opening, and standing open, have been added in addition to the previously-required doors-closing alarm, which has been changed to match the European-standard warning tone used on mainline railways. CCTV is fitted throughout the trains, which can be remotely accessed by the network security centre in the event that an emergency alarm is activated. Open gangways between the vehicles of each unit make it easier for passengers to move through the train, but internal doors are still provided should it be necessary to lock certain vehicles out of use.

In addition to the front and rear destination displays carried by the previous Berlin S-Bahn fleets, the new units are fitted with side-facing displays at regular intervals along the train, and high-resolution internal screens that are capable of showing route diagrams and real-time journey updates.

File:S-Bahn Berlin Baureihe 484 Führerstand.jpg, Driver's desk
File:S-Bahn Berlin Baureihe 484 Innenraum.jpg, View through open gangway
File:S-Bahn Berlin Baureihe 484 Mehrzweckbereich.jpg, Multipurpose area with tip-up seats
File:S-Bahn Berlin Baureihe 484 Fahrgastinformation.jpg, Internal information display

History

DB Regio subsidiary S-Bahn Berlin GmbH awarded a contract for the construction of 85 four-car and 21 two-car trains to the Stadler-Siemens consortium in December 2015. A mock-up of the train was presented in October 2016, and the first completed Class 484 train was rolled out on 27 June 2018.

The trains were tested at Siemens' Wegberg-Wildenrath Test and Validation Centre, with the first of five units to be tested there arriving in late 2018. Trial runs on the Berlin S-Bahn network started in September 2019, out of normal service hours.

The first passenger services with the new trains started on 1 January 2021, on line S47 between and , although these used a subfleet of 10 pre-production units and were technically still considered to be tests. The transition to "regular" service occurred in August 2021 after the pre-production units had satisfactorily demonstrated ongoing availability exceeding 99%.

From December 2021, the new trains also began operating on line S45 to Berlin Brandenburg Airport (although this ended in December 2022). The arrival of additional units allowed operations to expand to line S46 between and from 27 July 2022, and then onto line S8 between and from 14 October 2022.

Operation on the Ring lines S41 and S42, originally scheduled for April–October 2023, instead commenced on 11 December 2022.

Notes

References

External links

{{German EMUs

Electric multiple units of Germany
Berlin S-Bahn
750 V DC multiple units
Siemens multiple units
Stadler Rail multiple units